28 June 2021 in IEEE Transactions on Vehicular Technology
Since optical links are easily blocked by obstacles in the environment, they have been considered difficult to directly perform wireless communications. However, reconfigurable intelligent surfaces (RISs), as a new type of digital coding meta-materials, can significantly improve the coverage of optical communication by establishing new links. We propose a controllable multi-branch wireless optical communication system based on optical RISs. By setting up multiple optical RISs in the environment, multiple artificial channels are built to improve the system performance and to reduce the outage probability. In this paper, we investigate three factors affecting channel coefficients, including beam jitter, RIS jitter, and obstruction probability. We derive closed-form probability density function of channel coefficients, asymptotic average bit-error rate (BER), and the outage probability for systems with multiple branches. Our analysis reveals that the probability density function contains an impulse function, which causes irreducible error rate and outage probability floors. Based on our numerical results, the BER and outage probability floor of the multi-branch system are significantly reduced compared with the single direct path system. Therefore, the optical RIS assisted multi-branch wireless communication is a promising solution against obstacles of optical channel.
21 June 2022 in IEEE Transactions on Wireless Communications
Traditional visible light positioning (VLP) systems estimate receivers’ coordinates based on the assumption that light-emitting diode (LED) coordinates are known accurately, which is not always practical. Even with accurate laser range finders, the structural changes of the buildings due to temperature, humidity, and material aging might affect the LED coordinates unpredictably. Besides, when the number of LEDs increases, it is time-consuming to build a database of LED coordinates. In this paper, we propose a novel system exploiting two optical angle-of-arrival (AOA) estimators to localize the LEDs, and the AOA estimators have fixed relative positions. Each AOA estimator has four photodiodes (PDs) towards different orientations to estimate the incident light direction. Considering the additive noises imposed on the PDs, we derive a closed-form error expression of the LED coordinate estimator. Analytical and simulation results show that the two AOA estimators should be set symmetrically with respect to the room center to reduce the error of the LED coordinates database. Moreover, an experimental platform is built with two fixed AOA estimators and one moving LED in order to verify the approach. The measured average localization error is 4.46 cm and the time of one localization is about 23.4 ms.
11 July 2023 in IEEE Transactions on Wireless Communications
The coordinates of beacon light-emitting diodes (LEDs) are assumed as known prior information in most visible light positioning (VLP) systems. However, such an assumption may be unpractical because the structures of the buildings change unpredictably due to the material aging or the changes of temperature and humidity. Therefore, a periodical update of the LEDs’ coordinates is necessary for accurate VLP. When the number of beacon LEDs increases, the manual measurement becomes too time-consuming and laborious. In this paper, we propose a novel LED coordinates estimator exploiting arbitrary number of angle-of-arrival (AOA) estimators. Each AOA estimator contains several differently oriented photodiodes (PDs) to detect the incident light direction. Considering the PDs’ thermal noises, a closed-form error expression is derived for the proposed LED coordinates estimator. Moreover, AOA estimator selection methods are proposed to detect the AOA estimators of a low signal-to-noise ratio (SNR) and improve the positioning accuracy of the LED coordinates. Analytical and simulation results show centimeter-level positioning accuracy, and verify that the selection methods can reduce the positioning error.
17 April 2023 in IEEE Communications Letters
Unmanned aerial vehicles (UAVs) have been widely applied for their high mobility and low cost, and the visible light communication (VLC) aided UAV can combine the flexibility of UAV and the high transmission rate of VLC. However, the VLC links of a UAV are inevitably affected by the jittering effects, which were rarely characterized. In this letter, the channel between a light emitting diode (LED) and a hovering UAV is modeled considering the random orientation error of the UAV. Closed-form expressions are derived for the probability density function (PDF) and the cumulative distribution function (CDF) of the orientation error, which also leads to closed-form asymptotic PDF and CDF expressions of the UAV’s VLC channel gain. Simulation and experimental results are demonstrated to verify the theoretical derivations. The work lays a theoretical foundation for VLC-aided UAVs, providing insightful suggestions for the system design.
6 February 2024 in IEEE Transactions on Communications
Light-emitting diodes (LEDs) are widely used in visible light communication (VLC) systems, but their bandwidth is generally incomparable to the laser diodes (LDs). Though LDs are exploited in free space optical systems to provide high data rate, such systems generally fail for mobile users due to the challenges in acquisition, tracking and pointing. Recently, various centimeter-level visible light positioning (VLP) systems have been realized, making it possible to realize VLP-assisted communication systems. In this work, we design a novel VLP-assisted indoor laser communication system, where an LED provides the positioning signal for the mobile user and a narrow-beam laser carries high-speed data stream. The estimated position is updated regularly to continuously orient the laser boresight to the user. The error of the VLP system and the outage probability of the VLP-assisted laser communication system are both derived in closed forms. According to the analytical and simulation results, the outage probability is related to the changes of the system parameters, such as the transmission power of the laser and the user position. Moreover, the outage probability can be minimized by optimizing the laser’s beam divergence angle. An experimental platform is built to verify the feasibility of our proposed system.
13 June 2024 in IEEE Journal on Selected Areas in Communications
Visible light positioning (VLP) is endowed with high accuracy in indoor scenarios. However, the positioning algorithms require plenty of beacon light-emitting diode (LED) coordinates stored in databases, which are expensive to obtain by manual measurements. To circumvent such laborious efforts, we propose a two-step automatic scheme for simultaneous VLP and LED database construction. Specifically, in the first step, a receiver with a photodiode (PD) array samples the optical signals from few benchmark LEDs to locate itself. In the second step, the receiver estimates the unknown beacon LED coordinates through its own locations and the beacon LED signals. For the proposed two-step scheme, we derive closed-form error expressions for the beacon LED coordinates to evaluate the benchmark LEDs’ arrangement and the sampling places. Simulation results agree with the analytical error expressions and reveal that the proposed scheme can achieve centimeter-level accuracy with reasonable transmit powers. Experimental results from the hardware platform verify the feasibility of the scheme. The proposed scheme can circumvent laborious manual measurements and allow the LED database to “grow” while the receivers wander and more receivers enter.