Organic and Polymer Research Laboratory, Department of Chemistry, School of Advanced Sciences Vellore Institute of Technology Vellore Tamil Nadu 632014 India
Auto-generated profile, based on publicly available information
Hema Malini Venkatesan
Organic and Polymer Research Laboratory, Department of Chemistry, School of Advanced Sciences Vellore Institute of Technology Vellore Tamil Nadu 632014 India
This study investigates the potential of Ni-doped cobalt ferrite (CoFe₂O₄, N-CF) nanoparticles (NPs)-loaded electrospun poly(vinylidene fluoride) (PVDF) composites for triboelectric nanogenerators (TENGs) to efficiently harness electrical energy from low-frequency mechanical vibrations. PVDF was chosen for its strong electroactive polar phase and inherent tribo-negative properties. Cobalt ferrite (CF) NPs exhibit exceptional charge-trapping capabilities, while nickel’s metallic nature minimizes triboelectric losses due to its conductivity. The synergistic effects of Ni-doped CF (N-CF) fillers enhance charge-trapping efficiency and reduce triboelectric losses, significantly boosting TENG performance. Nickel oxide (NiO), CF, and N-CF NPs were synthesized using a facile co-precipitation method, and PVDF composites were fabricated through electrospinning. The physical and crystalline properties of the composites were characterized using various spectroscopic techniques. Results indicated that incorporating 3 wt% N-CF into PVDF optimized the β-crystalline phase content, crucial for improved output performance. Electrospun PVDF/N-CF (PNC) nanocomposite mats served as the tribo-negative (TN) layer, while aluminum (Al) electrode acted as the tribo-positive (TP) layer in TENG device fabrication. Electrical measurements showed that pristine PVDF/Al TENG devices exhibited lower performance (open-circuit potential—Voc = 22 V, short-circuit current—Isc = 0.61 µA) compared to the optimized Al/PNC3 TENG devices (Voc = 421 V, Isc = 1.0 µA). The importance of a spacer gap was emphasized, with devices incorporating a spacer gap demonstrating superior performance. The optimized TENG device successfully powered over 30 light-emitting diodes and a stopwatch in real-time applications. This study highlights the exceptional output performance of Al/PNC3-based TENGs and provides valuable insights into the development of next-generation sustainable energy harvesting materials.
Triboelectric nanogenerators (TENGs) have emerged as promising devices for sustainable energy harvesting. This study presents a strategy to enhance the performance of poly(vinylidene fluoride) (PVDF)‐based TENGs by incorporating bimetallic nanoparticles (NiO and ZnO) synthesized via co‐precipitation. Various ZnO loadings (0.1–0.7 wt%) are introduced into a PVDF/NiO matrix (7 wt% NiO), forming p‐n interfaces that improve charge trapping and energy output. The resulting hybrid nanocomposites (PN7/Z‐0.1, PN7/Z‐0.3, PN7/Z‐0.5, PN7/Z‐0.7) are characterized by SEM, XRD, and FT‐IR, confirming effective nanoparticle integration. Among them, PN7/Z‐0.5 exhibits the highest β‐phase content and superior triboelectric performance. The PN7/Z‐0.5:TPU TENG, with thermoplastic polyurethane (TPU) as the tribo‐positive layer, achieves an open‐circuit voltage (VOC) of 158.4 V, short‐circuit current (ISC) of 4.8 µA, surface charge density of 89 nC, and a surface potential of −475 V, which is substantially outperforming pristine PVDF:TPU TENGs. Additionally, the optimized TENG successfully powered capacitors and green LEDs, demonstrating its potential for practical, sustainable energy applications.