Julian F. Picard

Julian F. Picard

Auto-generated profile, based on publicly available information

Julian F. Picard

Plasma Science and Fusion Center, Massachusetts Institute of Technology , Cambridge, Massachusetts 02139, USA

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 April 2019 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
JPJulian F. Picard
Julian F. Picard
SSSamuel C. Schaub
Samuel C. Schaub
GRGuy Rosenzweig
Guy Rosenzweig
JSJacob Stephens
Jacob Stephens
MSMichael A. Shapiro
Michael A. Shapiro
RTRichard J. Temkin
Richard J. Temkin
A laser-driven semiconductor switch (LDSS) employing silicon (Si) and gallium arsenide (GaAs) wafers has been used to produce nanosecond-scale pulses from a 3 μs, 110 GHz gyrotron at the megawatt power level. Photoconductivity was induced in the wafers using a 532 nm laser, which produced 6 ns, 230 mJ pulses. Irradiation of a single Si wafer by the laser produced 110 GHz RF pulses with a 9 ns width and >70% reflectance. Under the same conditions, a single GaAs wafer yielded 24 ns 110 GHz RF pulses with >78% reflectance. For both semiconductor materials, a higher value of reflectance was observed with increasing 110 GHz beam intensity. Using two active wafers, pulses of variable length down to 3 ns duration were created. The switch was tested at incident 110 GHz RF power levels up to 600 kW. A 1-D model is presented that agrees well with the experimentally observed temporal pulse shapes obtained with a single Si wafer. The LDSS has many potential uses in high power millimeter-wave research, including testing of high-gradient accelerator structures.

21 March 2019 in Physical Review Applied
Verified
Journal Article
Open access
PDF file
SKSergey V Kutsaev
Sergey V Kutsaev
BJB. Jacobson
B. Jacobson
ASA.Yu. Smirnov
A.Yu. Smirnov
TCT. Campese
T. Campese
VDValery Dolgashev
Valery Dolgashev
SSS.C. Schaub
S.C. Schaub
The development of alternative mm-wave high-gradient, >200 MV/m, accelerating structures offers a promising path to reduce the cost and footprint of future TeV-scale linear colliders, as well as linacs for industrial, medical, and security applications. The major factor limiting accelerating gradient is vacuum rf breakdown. The probability of such breakdowns increases with pulse length. For reliable operation, millimeter-wave structures require nanoseconds-long pulses at the megawatt level. This power is available from gyrotrons, which have a minimum pulse length on the order of microseconds. To create shorter pulses and to reliably detect rf breakdowns, we developed the following devices: a laser-based rf switch capable of selecting 10 ns long pulses out of the microseconds long gyrotron pulses, thus enabling the use of the gyrotrons as power sources for mm-wave high-gradient linacs, and a shot-to-shot sub-THz spectrometer with high-frequency resolution, capable of detecting pulse shortening due to rf breakdowns. We will describe the principle of operation of these devices and their achieved parameters. We also report on the experimental demonstration of these devices with the high-power gyrotron at the Massachusetts Institute of Technology. In the experiments, we demonstrate nanosecond rf power modulation, shot-to-shot measurements of the pulse spectra, and detection of rf breakdowns.

25 July 2022 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
JGJ. Genoud
J. Genoud
ECE. L. Claveau
E. L. Claveau
SJS. K. Jawla
S. K. Jawla
GLGuangjiang Li
Guangjiang Li
JPJ. F. Picard
J. F. Picard
RTR. J. Temkin
R. J. Temkin
A 250 GHz quasi-optical ring resonator consisting of an input coupler and three mirrors has been designed and tested. A low-loss silicon wafer in the ring provides output coupling of the stored power when irradiated by a pulse from a 532 nm laser. The ring created 5.8 ns, 268 mW output power pulses when excited by a 17 mW, 250 GHz continuously operating input source, achieving a power gain of 16. In a fully tuned ring, higher gain is achievable. If the ring was used with a pulsed input source having a pulse length of several times the fill time, the ring could be used as an efficient pulse compressor with similar high gain. The resonator has a wide range of applications, including, at low power, spectroscopy and, at high power, testing of accelerator structures and materials.

29 June 2020 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
XLXueying Lu
Xueying Lu
JPJulian F. Picard
Julian F. Picard
MSMichael A. Shapiro
Michael A. Shapiro
IMIvan Mastovsky
Ivan Mastovsky
RTRichard J. Temkin
Richard J. Temkin
CJChunguang Jing
Chunguang Jing
We present an experimental study of coherent high-power wakefield generation in a metamaterial (MTM) structure at 11.7 GHz by 65 MeV electron bunch trains at the Argonne Wakefield Accelerator (AWA), following a previous experiment, the Stage-I experiment, at the AWA. Both the Stage-II experiment, reported in this paper, and the Stage-I experiment were conducted using MTM structures, which are all-metal periodic structures with the period being much smaller than the wavelength. Differences between the two experiments include (1) structure length (Stage-I 8 cm and Stage-II 20 cm); (2) number of bunches used to excite the structure (Stage-I with two bunches, up to 85 nC of total charge; Stage-II with eight bunches, up to 224 nC of total charge); and (3) highest peak power measured (Stage-I 80 MW in a 2 ns pulse and Stage-II 380 MW in a 10 ns pulse). High-power radio frequency pulses were generated by reversed Cherenkov radiation of the electron beam due to the negative group velocity in the MTM structures. Because the radiation is coherent, a train of bunches with a proper spacing can build up to achieve a high peak power. The observed output power levels are very promising for future applications in direct collinear wakefield acceleration or in transfer to a second accelerator for two-beam acceleration.

16 May 2022 in Physical Review Accelerators and Beams
Verified
Journal Article
Open access
PDF file
JPJulian Picard
Julian Picard
IMIvan Mastovsky
Ivan Mastovsky
MSMichael A. Shapiro
Michael A. Shapiro
RTRichard J. Temkin
Richard J. Temkin
XLXueying Lu
Xueying Lu
CJChunguang Jing
Chunguang Jing
We report the generation of up to 565 MW, 2.7 ns (FWHM) pulses at 11.7 GHz from a metamaterial structure in test at the Argonne Wakefield Accelerator. The highest power was generated by a train of eight 65 MeV electron bunches spaced at 1.3 GHz with a total charge of 355 nC. The metamaterial structure consists of 100 copper unit cells each consisting of a wagon-wheel plate and a spacer plate with a total structure length of 0.2 m. The 565 MW pulse generates a wakefield with a peak on-axis gradient of 135  MV/m that could be used to accelerate a trailing main bunch. An estimated surface electric field of over 1  GV/m is generated on the metamaterial plates at the peak power level but no evidence of breakdown was observed during testing. Tests with single electron bunches and with trains of bunches of up to 100 nC produced output power levels in excellent agreement with simulations. At higher total bunch charge, offsets of the bunches from the axis resulted in beam interception and reduced output power. Simulations indicate that a perfectly aligned bunch train would generate more than 1 GW of power from the structure.

27 October 2020 in Journal of Infrared, Millimeter, and Terahertz Waves
Verified
Journal Article
Closed access
PDF file
GRGuy Rosenzweig
Guy Rosenzweig
SJSudheer K. Jawla
Sudheer K. Jawla
JPJulian F. Picard
Julian F. Picard
MSMichael A. Shapiro
Michael A. Shapiro
RTRichard J. Temkin
Richard J. Temkin