20 February 2020 in Physical Review B
Current-driven skyrmion motion in random granular films is investigated, with interesting findings. For a given current, there exists a critical disorder strength below which its transverse motion could either be boosted below a critical damping or be hindered above the critical damping, resulting in current and disorder dependences of the skyrmion Hall angle. The boosting comes mainly from the random force that is opposite to the driving force (current). The critical damping depends on the current density and disorder strength. However, the longitudinal motion of a skyrmion is always hindered by the disorder. Above the critical disorder strength, skyrmions are pinned. The disorder-induced random force on a skyrmion can be classified as static or kinetic, similar to the friction force in the Newtonian mechanics. In the pinning phase, the static (pinning) random force is against the tendency direction of skyrmion motion that is transverse to the current density for spin-transfer-torque-driven motion. The kinetic random force is opposite to the skyrmion velocity when skyrmions are in motion. Furthermore, we provide strong evidences that the Thiele equation can perfectly describe skyrmion dynamics in granular films. These findings provide insight into skyrmion motion and should be important for skyrmiontronics.
29 March 2022 in Physical Review B
High precision skyrmion pinning by an intentionally created magnetic structure is important in skyrmion manipulation. Here, we consider skyrmion pinning by various types of disks. Among other findings, we clarify that, in terms of pinning position and pinning potential landscape, one needs to distinguish thin-wall skyrmions from thick-wall skyrmions because of fundamental differences. A skyrmion wall prefers areas with a weaker exchange stiffness, a larger DMI constant, or a smaller magnetic anisotropy while a skyrmion core experiences only the magnetic anisotropy, not exchange stiffness and DMI. Depending on disk type, skyrmion type, and the relative size of the disk (to skyrmion), a skyrmion can be pinned at the symmetric (center) or asymmetric (off-center) point of a disk. In case a skyrmion is pinned by a local energy minimum, thermal agitation can depin the skyrmion, and the pinning lifetime follows an Arrhenius law. Interestingly, when the disk size is comparable to the skyrmion size, the skyrmion deforms greatly such that the skyrmion will shrink or expand to fill the whole disk. These findings should be important for skyrmion manipulations.
22 November 2022 in Physical Review B
Magnetic domain wall (DW) propagation in nanowires is an important problem whose applications require stable high speeds that are very difficult to achieve with ferromagnets due to the existence of the Walker breakdown, which separates a rigid-body motion from an oscillatory motion. One of the recent fascinating discoveries in magnetism is the high-speed DW motion along ferrimagnetic (FiM) nanowires near the angular momentum compensation point (AMCP). A clear understanding of this fascinating phenomenon is still lacking. Here we use the energy conservation principle and generic FiM dynamics to reveal the physics behind the DW motion and the absence of the Walker breakdown and precessional torque at the AMCP. An almost exact DW velocity formula beyond the Walker breakdown field is obtained that agrees with experiments and simulations. This theory provides useful guidance for the design of high-speed spintronic DW devices.
19 February 2024 in Applied Physics Letters
Superradiance, a phenomenon of multiple facets, normally occurs in classical/quantum physics under extreme conditions. Here, we present its manifestation in spin waves under a practical condition. We show that an interface between a current-free ferromagnetic region and a current-flow ferromagnetic region can be a spin wave supermirror whose reflection coefficient is larger than 1. The super-reflection is the consequence of current-induced spectrum inversion where phase and group velocities of spin waves are in the opposite directions. An incident spin wave activates a backward propagating refractive wave inside the current-flow region. The refractive spin wave re-enters the current-free region to constructively interfere with the reflective wave. It appears that the current-flow region coherently emits reflective waves, leading to a super-reflection. The process resembles superradiance of a spinning black hole through the Hawking radiation process or Dicke superradiance of cavity photons inside population inverted media.
23 April 2025 in Journal of Applied Physics
Hf0.5Zr0.5O2 based capacitors with a metal–ferroelectric–metal structure have been fabricated in this study, with or without ammonia plasma nitridation at the metal/oxide interfaces. The purpose of this work is to study the role nitrogen plays in the ferroelectric properties of these materials. It is observed that ferroelectricity is enhanced after the interface treatment with NH3 plasma nitridation. The material analysis results indicate that this ferroelectricity improvement results from the diffusion of nitrogen atoms into the Hf0.5Zr0.5O2 film at the metal/oxide interface. Further, the nitrogen binds to the oxygen vacancies at the interface and forms a nitrogen-doped Hf0.5Zr0.5O2 film, enabling oxygen vacancies movement. After 90 s of NH3 plasma interfacial treatment, the metal–ferroelectric–metal capacitor device achieves a maximum memory window of 3.7 V. The results of the electrical test and physical phase analysis demonstrate that NH3 plasma interfacial treatment of ferroelectric thin films can effectively improve the interfacial effect between ferroelectric materials and the top electrode, which in turn enhances the storage performance of the device.
26 October 2026 in Applied Physics Letters
Ferroelectric capacitors based on hafnium materials hold significant potential in nonvolatile memory and compute-in-memory computing, yet their on/off ratio and endurance under nondestructive readout remain critical challenges. This paper proposes an interface engineering strategy that effectively modulates the capacitive memory window at zero bias by inserting an ultrathin tungsten metal interlayer at the ferroelectric–dielectric interface. Experiments have demonstrated that devices with a 5 nm tungsten interlayer achieve a capacitive on/off ratio of 1.18 and exhibit exceptional endurance exceeding 108 cycles. This enhancement in performance is primarily attributable to the synergistic effects of charge modulation and localized field enhancement at the interface. A LeNet-5 neural network constructed using this device achieved a recognition accuracy of 95.16% in the MNIST handwritten digit recognition task. This research provides a viable device solution for developing high-performance, highly reliable edge computing hardware.