1 October 2024 in Physics of Fluids
This paper presented a novel numerical method for estimating the gas diffusion coefficient based on the early-time pressure-decay data. Experimentally, “flooding–soaking” procedures were developed to perform the gas diffusion in an oil-saturated tight core under different gas phase volume conditions. After flooding, the capillary bundle model was used to calculate the oil–gas contact area. The early-time pressure-decay data of the gas phase were monitored and recorded during the soaking process. Theoretically, a non-equilibrium inner boundary condition coupled with the characteristics of experimental early-time pressure had been incorporated to develop a diffusion model for a gas/oil-saturated tight core system. Based on gas-phase mass balance equations and gas equation of state, the diffusion coefficients were optimized once the discrepancy between experimental data and numerical solutions was minimized. According to the estimated results in this study, the CH4 diffusion coefficients were 3.74 × 10−11 and 3.86 × 10−11 m2/s in tight core saturated with crude oil, respectively. Moreover, the oil–gas contact area significantly impacts the diffusion flux in oil-saturated porous media. Specifically, an additional 10% contact area results in a 75% increase in CH4 diffusion mass. In addition, with the application of our proposed model to CH4/bitumen and CO2/bitumen systems, the diffusion coefficients were in close agreement with the results reported in previous literature, indicating that the proposed model was applicable to both gas/liquid and gas/liquid-saturated porous media systems.
1 June 2026 in Physics of Fluids
In the commingled production of low-permeability heterogeneous porous media, the non-Darcy flow characteristics governed by the threshold pressure gradient (TPG) induce complex interlayer interference, significantly compromising fluid mobilization. By integrating a TPG-based nonlinear flow model with physical simulation experiments, the quantitative mechanism of hydrodynamic shunting is elucidated, and the dynamic limits of commingled production are determined. The results demonstrate that interlayer interference is inherent to commingled systems and significantly intensifies with increasing heterogeneity, leading to a marked increase in productivity deficit as the permeability ratio widens. Although rising water cut reduces fluid viscosity and flow resistance, the intensified shunting effect in high-permeability layers causes the effective pressure coefficient (β) of low-permeability layers to decay at a rate significantly outpacing the resistance reduction. Flow stagnation occurs once the effective driving force fails to overcome the TPG barrier (β < G/▽Psys). This mechanism is corroborated by nuclear magnetic resonance imaging, which visualizes the spatial evolution of residual oil from uniform displacement to central enrichment, and finally to a completely unswept dead-oil state. Furthermore, a dynamic limit chart for commingled production is established, revealing a distinct time-dependent contraction of the feasible domain. Governed by the coupling of fluid rheology and shunting intensity, the maximum allowable permeability ratio decreases significantly from the early to late water-cut stages. These findings highlight the progressive inadequacy of static layer subdivision schemes and necessitate the implementation of dynamic layer reorganization to mitigate the intensified interlayer interference caused by expanding hydrodynamic disparities.
9 October 2026 in Geoenergy Science and Engineering
1 August 2026 in Physics of Fluids
Immiscible displacement in fractured porous media involves the coupling of pore-scale capillary thresholds, viscosity contrast, and macroscopic source–sink boundary constraints. Here, we examine how boundary-connected fractures modify the leading-order source–sink constraint and affect viscous fingering in heterogeneous micromodels. Four boundary configurations are compared under the same low capillary number and viscosity-unstable condition: non-fractured point-source/point-sink displacement, injector-fractured inlet-manifold/point-sink displacement (FI), producer-fractured point-source/outlet-manifold displacement (FP), and dual-end fractured inlet-manifold/outlet-manifold displacement (FIP). High-resolution visualization, equipotential-boundary formulation, and convolutional neural network-based phase segmentation are combined to quantify displacement kinetics and front morphology. The FIP configuration initiates visible mobilization earliest and reaches the highest final sweep and displacement efficiencies, at 92.07% and 53.73%, respectively. This behavior is consistent with a two-stage mechanism: bilateral fracture-connected equipotential manifolds appear to reduce persistent outlet-focused localization during early invasion, while the stabilized main conduit after breakthrough is consistent with organized lateral displacement. In contrast, FI converts early front spreading into outlet-focused channel locking, whereas FP exhibits delayed reorganization under the production-side equipotential manifold. Fractal dimension, frontal asymmetry index, and frontal fluctuation index further indicate that boundary topology affects not only the extent of fingering but also the pathway through which interfacial instability develops, localizes, reorganizes, and partially relaxes.
1 July 2026 in Physics of Fluids
Non-condensable gas-assisted cyclic steam stimulation (NCG-CSS) elevates reservoir pressure during heavy oil recovery; however, the resultant thermal front expansion triggers complex multiphase inter-well interference with adjacent cyclic steam stimulation (CSS) patterns. The fluid mechanics and thermodynamic mechanisms governing this interference remain poorly understood. Integrating multi-stage experiments, this study elucidates the spatiotemporal evolution of temperature profiles and multiphase flow behavior during NCG-CSS and CSS interaction. We formulate a zonal characterization model for NCG and steam flow that, coupled with a stepwise quasi-steady-state approach, enables precise prediction of interference onset and fluid recovery. Results reveal interference evolves through two distinct thermodynamic phases: the X–Y and Y stages. Initially (X–Y stage), the thermal front expands along the inter-well axis, confined near preexisting heated zones. Subsequently (Y stage), longitudinal deflection of the temperature distribution penetrates orthogonally into cold oil zones. While aggregate cumulative production is enhanced by 6.3% and 16.1% during these respective stages, energy efficiency degrades, with the oil–steam ratio dropping by 15.3% and 30%. The interference is governed by thermal front expansion: steam supplies the dominant heat input, whereas NCG redistributes pressure and promotes steam and hot water flow. Excessive injection enlarges the radius disparity between adjacent thermal fronts, weakening interference-area expansion. Thermal redistribution between wells affects production performance, a mechanism that becomes increasingly pronounced as interference intensity rises. By extending wellbore-constrained flow theory from the vertical (X–Z) to the horizontal (X–Y) plane, this study provides a holistic multiphase framework for multi-well interaction in porous media.