28 August 2019 in IEEE Transactions on Industrial Electronics
Modular Multilevel Converters (MMC) are complex systems, composed of many elements, and exposed to critical load demands in some cases. Thereby, a detailed design of its components is of preeminent importance to achieve a high system-level reliability. However, the high number of devices challenges the trade-off between cost and reliability. This work, introduces a reliability-oriented design methodology, based on the cost to achieve a predefined unreliability level ( $U_x$ ). A flowchart presents the main steps of the process, including the mission profile definition, selection of power devices, thermal modeling, reliability modeling and the reliability-oriented selection. To evaluate the proposed methodology, a case study considering 17 MVA/13.8kV MMC-STATCOM with a real mission profile data is conducted. A $U_x$ — $cost$ map is introduced to compare various design solutions, based on power devices of different voltage classes and current capabilities.
5 February 2021 in IEEE Open Journal of Power Electronics
Active thermal control has been introduced to regulate the steady state and reduce the transient thermal-mechanical stress in power electronic modules. Specifically, it can equally distribute the temperature among the devices, thereby better distributing the stress among a set of devices and reducing the failure probability in the most thermally-stressed devices. This is of great importance for multilevel topologies and in particular for the Neutral Point Clamped (NPC) topologies, which have an inherent thermal unbalance among devices of the same phase. In hybrid structures, whereby Si and SiC devices are mixed to achieve a better trade-off between efficiency and cost, this problem is even worse due to technology differences. This paper investigates the advantages introduced by using Finite-Set Model Predictive Control (FS-MPC) algorithms designed for achieving a balanced device junction temperature in hybrid NPC and Active-NPC converters. Moreover, a novel setup composed by a hybrid ANPC based power modules is used to experimentally validate the presented FS-MPC algorithm. A lifetime estimation is performed for the two topologies to highlight the long-term benefits of FS-MPC algorithm in these hybrid topologies for UPS applications.
19 October 2020 in IEEE Transactions on Power Electronics
This work proposes the minimum dc-link voltage control for efficiency and reliability improvement of two-stage grid-connected photovoltaic (PV) inverters. The main goal is to compute in real-time the minimum dc-link voltage required for power transfer to reduce the stresses on capacitors and semiconductor devices. Analytical expressions of current and voltage stresses in the converter components are derived to support the viability of the technique. The feasibility of this control strategy is demonstrated by experimental results. The efficiency and system-level reliability are computed based on a case study of a 3-kW commercial PV inverter. The results indicate that the proposed solution leads to suitable dynamic response, reduced power losses and increased system-level reliability. Since no additional hardware is required to implement the proposal, this approach can improve the reliability of current PV inverter technology through simple modifications in the firmware of installed systems.
20 April 2018 in IEEE Transactions on Industry Applications
In metals industry, rolling is the most widely used steel forming process to provide high production and control of final product. Rolling mills must be able to change the speed of the strip at the same time that the speed is controlled within precise limits. Furthermore, this application has a severe load profile, with high torque variations during the lamination process. These characteristics include rolling mills among the classical Mission Critical Industry Applications (MCIA). In addition to the high cost/failure rate, rolling mills have a critical dynamic loading, making the design of a reliable system doubly challenging. Design For Reliability (DFR) is the process conducted during the design of a component or system that ensures them to perform at the required reliability level. In the context of the power converters for rolling mills and other MCIA, the DFR should be known and adopted in the design of the converter proper (component level) well as in the specification of power converters (system level). This paper contributes to the knowledge in the field by proposing a methodology covering the necessary steps for decision-making during the design (component level) and selection (systems level) of power converters for MCIA. A rolling mill system from a large steel plant in southeastern Brazil is adopted as case study. The standard high power converter solution is compared with two high reliability converter topologies: the FT-ANPC and the TSBC-MMC. The importance of DFR in mission critical applications is demonstrated.
30 May 2017 in IEEE Transactions on Industry Applications
BFBraz de Jesus Cardoso Filho
Braz de Jesus Cardoso Filho
Mine hoist systems play a vital role in gold ore transportation. They are the connection between the underground mine and the beneficiation plant. As a result, any hoist system interruption compromises the production. In this paper, it is proposed a mission critical analysis and design methodology for power converters in order to achieve proper reliability of the hoist drive system. Since the failure of power devices is responsible for a significant portion of the total downtime of power converters, a detailed study of the insulated gate bipolar transistor (IGBT) power modules lifetime is carried out. The three level neutral-point-clamped and Active Neutral Point Clamped (ANPC) IGBT-based topologies are considered for this application. The recently presented Fault-Tolerant (FT)-ANPC converter is proposed as a higher reliability solution leading to longer power modules and drive system lifetimes. All the studies are based on practical operating data from a 900-m deep shaft hoist system operating in a gold mine in southeastern Brazil.
25 September 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Although multichip systems (MCS) are the standard solution for high power converters, uneven losses and thermal distribution affect unequal lifetime consumption. Many solutions have been proposed to mitigate these effects, however critical thermal deviations are still observed leading to a reduction of the overall MCS reliability. Therefore, this work proposes a selective soft-switching (SS) approach, whereby the turn-off losses of the devices are manipulated to obtain thermal balancing and increase the reliability of MCSs. As a consequence, the high current per device reduces its turn-off time, thereby slightly increasing the MCS efficiency. In addition, a pre-tuning based thermal balancing approach is presented, whereby the junction temperature (Tj) of the devices are sensed via collector-emitter voltage (Vce) only under reduced current conditions. To validate the proposed solutions, FEM-based simulation and experimental tests are conducted. Moreover, a case study demonstrates the capability of the selective soft-switching to increase the reliability and reduce the energy consumption of multichip systems.