10 January 2025 in Communications Physics
Back-action refers to a response that retro-acts on a system to tailor its properties with respect to an external stimulus. This effect is at the heart of many electronic devices such as amplifiers, oscillators, and sensors. Here, we demonstrate that back-action can be exploited to achieve non-reciprocal transport in superconducting circuits. In our devices, dissipationless current flows in one direction whereas dissipative transport occurs in the opposite direction. Supercurrent diodes presented so far rely on magnetic elements or vortices to mediate charge transport or external magnetic fields to break time-reversal symmetry. Back-action solely turns a conventional reciprocal superconducting weak link with no asymmetry between the current bias directions into a rectifier, where the critical current amplitude depends on the bias sign. The self-interaction of the supercurrent stems from the gate tunability of the critical current in metallic and semiconducting systems, which promotes nearly ideal magnetic field-free rectification with selectable polarity.
17 September 2025 in Nano Letters
The superconducting diode effect has garnered significant interest due to its prospective applications in cryogenic electronics and computing, enabling directional supercurrent transport. This phenomenon has been demonstrated across various superconducting platforms, which typically necessitate unconventional materials with broken spatial symmetries or external magnetic fields, posing scalability and integration challenges. This work introduces an innovative method to realize the superconducting diode effect by disrupting spatiotemporal symmetries in a conventional Josephson junction utilizing a biharmonic alternating-current (AC) drive signal. We achieve wireless modulation of the diode's polarity and efficiency with an antenna. Our findings indicate a diode efficiency reaching the ideal 100% over a broad frequency range, with a temperature resilience of up to 800 mK, and efficient AC signal rectification. This versatile and platform-independent superconducting diode signifies a promising component for advancing future superconducting digital electronics, including efficient logic gates, ultrafast switches, and dynamic half-wave supercurrent rectifiers.
23 April 2025 in ACS Applied Electronic Materials
26 September 2025 in Nature Communications
Time-division multiplexing of cryogenic signals is a promising approach to reduce space requirements, shorten cooldown times, and increase the number of quantum devices measured per cooldown. We demonstrate time-division multiplexing of non-dissipative supercurrents using voltage-controlled hybrid superconducting demultiplexers. These chips integrate superconducting Josephson Field Effect Transistors including Al superconducting electrodes, proximitized semiconducting InAs channels, and hafnium oxide gate insulators. Each transistor fully suppresses the switching current and increases the resistance 20 times under a gate voltage of −4.5 V. A demultiplexer with one input and eight outputs showed a non-dissipative input range of ±2 μA, operating up to 100 MHz in signal frequency, and 100 kHz in switching frequency at 50 mK. It achieved near-zero insertion loss in the superconducting state and an \(\frac{{ON}}{{OFF}}\) ratio of 17.5 dB. By optimizing the signal layout, the operation was extended up to 4 GHz using a demultiplexer with two outputs.