The proposed innovative manufacturing process-described in detail-uses metal foam to create a pressed contact between the top side of a printed circuit board-embedded power die and the rest of the circuit. Initial prototypes were constructed using diodes with die dimensions of 4 mm × 6.35 mm. The prototypes were electrically characterized: the chip and contact dc and ac impedance values were measured and compared with those obtained for conventional packaging that uses bond wires. The electrical impedance of the prototypes was found to be similar to that of a state-of-the-art industrial package. Moreover, the proposed process is simple and cost-effective. Although the results presented in this letter are promising, further research is necessary to fully assess the benefits and limitations of the process.
11 August 2015 in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
The full integration of DC-DC converters offers great promise for dramatic reduction in power consumption and the number of board-level components in complex systems on chip. Some papers compare the numerous published on-chip and on-die converter structures, but there is the need for an approach to accurately compare the main basic DC-DC conversion topologies. Therefore, this paper presents a method to compare the efficiencies of CMOS integrated capacitive-, inductive- and resonant-based switching converters. The loss mechanism of each structure in hard-switching conditions is detailed and the analytical equations of the power loss and output voltage are given as a function of few CMOS technology parameters. The resulting models can be used to accurately predict converter efficiency in the early design phase, to compare the basic structure in particular the technology node or to orient the passive choice. The proposed method is then applied to design, optimize and compare fully-integrated power delivery requirements on a 1 mm2 on-die area in 65 nm CMOS technology over three decades of power density. The results also underline the high efficiency of the promising resonant-based converter.
Voltage controlled magnetic components, which consist of dynamically controllable inductances and transformers, are a promising yet understudied technology of growing interest. In fact, these components offer circuit designers an additional degree of freedom to achieve multi-objective optimization with improved Pareto fronts. This article provides a review of some technologies that can be used to create controlled magnetics, including emerging technologies with high potential. Furthermore, a list of possible applications are proposed, where these components can provide a significant advantage in terms of efficiency, size reduction, or controllability. Special emphasis is laid on a use case: a 20 kW multiport dc–dc converter in which power flow control is achieved using voltage-controlled inductors based on partially saturable magnetic cores.
1 June 2021 in Mathematics and Computers in Simulation
Electric trucks are exposed to short-duration high-current events, such as kerbstone climbing, where the traction inverter operates at high current and zero or very low output frequency. Under these conditions, the junction temperature of the power semiconductors can rapidly approach critical limits. Conventional mitigation strategies rely on torque limitation or hardware oversizing, which either degrade vehicle performance or increase system cost. This article investigates the application of Active Thermal Control (ATC) to enhance dynamic current capability and lifetime utilisation. Three strategies are analysed, namely gate voltage increase, switching frequency reduction, and discontinuous pulse width modulation, together with selected hybrid combinations. A simulation framework integrating loss estimation, state space thermal modelling, and cycle-counting based lifetime evaluation is developed and experimentally validated using a dedicated back-to-back test bench with direct junction temperature measurement. Results show that the combined gate voltage and switching frequency strategy reduces the junction-to-ambient temperature rise by approximately 42% and increases the allowable number of climbing events by up to ten times for a peak current of 135 A (0.9 pu). For a fixed thermal constraint, the same strategy enables about 35% higher current. The study also analyses the trade-offs associated with each ATC strategy, highlighting both their thermal and lifetime benefits and their potential impact on current quality and implementation complexity, among other aspects. These findings support the integration of ATC in electric vehicle traction systems for lifetime-aware and performance-oriented operation.