Fragile Tin Oxide Electrodes: While tin oxide has a high energy density, and would thus make an attractive anode material for a Li-ion battery, it undergoes significant volume changes when Li is intercalated. The large strains cause cracking, pulverization, and a resultant loss of electrical conduction.
Huang
et al. (p. 1515 ; see the Perspective by Chiang ) used in situ transmission electron microscopy on a single tin oxide nanowire to identify the physical changes that occur during intercalation and observed a moving cloud of dislocations that separated the reacted and unreacted sections. Upon completion of the electrochemical charging, the nanowire showed up to 90% elongation and a 35% increase in diameter.
26 September 2017 in Journal of the American Chemical Society
LiNi1/3Mn1/3Co1/3O2-layered cathode is often fabricated in the form of secondary particles, consisting of densely packed primary particles. This offers advantages for high energy density and alleviation of cathode side reactions/corrosions, but introduces drawbacks such as intergranular cracking. Here, we report unexpected observations on the nucleation and growth of intragranular cracks in a commercial LiNi1/3Mn1/3Co1/3O2 cathode by using advanced scanning transmission electron microscopy. We find the formation of the intragranular cracks is directly associated with high-voltage cycling, an electrochemically driven and diffusion-controlled process. The intragranular cracks are noticed to be characteristically initiated from the grain interior, a consequence of a dislocation-based crack incubation mechanism. This observation is in sharp contrast with general theoretical models, predicting the initiation of intragranular cracks from grain boundaries or particle surfaces. Our study emphasizes that maintaining structural stability is the key step towards high-voltage operation of layered-cathode materials.
Cracking the problem of cracking cathodes: Polycrystalline cathode materials that contain a combination of nickel, manganese, and cobalt have been used for advanced lithium batteries. These materials fracture at high voltage, which increases surface area and leads to more side reactions and shorter cycle life. Using single-crystalline samples as model materials, Bi et al. observed changes in nickel-rich cathodes to study the fracture behavior under well-characterized conditions. As the material is charged and lithium is removed, specific planes glide over one another and microcracks are observed. However, this process is reversed on discharge, removing all traces of the microcracking. The authors developed a diffusion-induced stress model to understand the origin of the planar gliding and propose ways to stabilize these nickel-rich cathodes in working batteries. Science , this issue p. 1313