Inorganic and organic-inorganic (hybrid) perovskite semiconductor materials have attracted worldwide scientific attention and research effort as the new wonder semiconductor material in optoelectronics. Their excellent physical and electronic properties have been exploited to boost the solar cells efficiency beyond 23% and captivate their potential as competitors to the dominant silicon solar cells technology. However, the fundamental principles in Physics, dictate that an excellent direct band gap material for photovoltaic applications must be also an excellent light emitter candidate. This has been realized for the case of perovskite-based light emitting diodes (LEDs) but much less for the case of the respective laser devices. Here, the strides, exclusively in lasing, made since 2014 are presented for the first time. The solution processability, low temperature crystallization, formation of nearly defect free, nanostructures, the long range ambipolar transport, the direct energy band gap, the high spectral emission tunability over the entire visible spectrum and the almost 100% external luminescence efficiency show perovskite semiconductors’ potential to transform the nanophotonics sector. The operational principles, the various adopted material and laser configurations along the future challenges are reviewed and presented in this paper.
20 February 2025 in Advanced Materials Technologies
The urgency for a sustainable mitigation of the environmental impacts caused by climate change highlights the importance of renewable energy technologies to fight this challenge. Perovskite solar cells (PSCs) emerge as a promising alternative to traditional photovoltaic (PV) technologies due to their unprecedented increase in efficiency (currently peaking at 26.95%) and long‐term stability proven by the successful completion of industry relevant International Electrotechnical Commission (IEC) testing standards. Flexible PSCs (f‐PSCs) offer significant advantages such as lightweight and high power‐per‐weight ratio, mechanical flexibility, and a high throughput roll‐to‐roll (R2R) manufacturing. These make f‐PSCs ideal for implementation in various applications areas, such as wearable electronics, portable devices, space PV, building‐ or automotive‐integrated PVs, and more. Notably, efficiencies over 23% now mark a significant milestone for f‐PSCs, demonstrating their competitiveness with traditional rigid solar panels. This review explores breakthroughs in f‐PSCs, focusing on flexible substrates, electrode materials, perovskite inks, and encapsulation strategies. It also covers recent advancements and studies of f‐PSCs fabricated by scalable deposition methods and emphasizes the importance of interfacial engineering and encapsulation in enhancing stability and durability. The review concludes with a summary of key findings, remaining challenges, and perspectives for the successful market uptake of f‐PSCs.
Operational stability and structural integrity of a poly(triarylamine) hole transporter and methylammonium lead halide absorber are investigated upon exposure to UV stress.
Hydrogen (H2) is a well-known reduction gas and for safety reasons is very important to be detected. The most common systems employed along its detection are metal oxide-based elements. However, the latter demand complex and expensive manufacturing techniques, while they also need high temperatures or UV light to operate effectively. In this work, we first report a solution processed hybrid mixed halide spin coated perovskite films (CH3NH3PbI3−xClx) that have been successfully applied as portable, flexible, self-powered, fast and sensitive hydrogen sensing elements, operating at room temperature. The minimum concentrations of H2 gas that could be detected was down to 10 ppm. This work provides a new pathway on gases interaction with perovskite materials, poses new questions that must be addressed regarding the sensing mechanisms involved. The utilization of halide perovskite sensing elements demonstrates their potential beyond solar cell applications.
Ultrathin, solution-processed emerging solar cells with high power-per-weight (PPW) outputs demonstrate unique potential for applications where low weight, high power output, and flexibility are indispensable. The following perspective explores the literature of emerging PVs and highlights the maximum reported PPW values of perovskite solar cells (PSCs) 29.4 W/g, organic solar cells (OSCs) 32.07 W/g, and quantum dot solar cells 15.02 W/g, respectively. The record PPW values of OSCs and PSCs are approximately one order of magnitude higher compared to their inorganic ultrathin solar cells counterparts (approximately 3.2 W/g for CIGS and a-Si). This consists emerging PVs, very attractive for a variety of applications where the PPW is the key parameter. In particular, both OSCs and PSCs can be implemented in different scenarios of applications (indoor and biocompatible applications for OSCs and outdoor and high-energy radiation conversion conditions for the PSCs) due to their unique optoelectronic and physiochemical properties. Finally, our theoretical optical and electrical simulation and optimization study for the most promising and well-suited PV technologies showed an impressive maximum realistic theoretical PPW limit of 74.3 and 93.7 W/g for PSCs and OSCs, respectively. Our finding in the theoretical section shows that the experimental results achieved in the literature of PSCs and OSCs toward high PPW outputs is not quite close to the theoretical maximum (35% and 40% of the theoretical maximum for OSCs and PSCs, respectively), and thus, more work needs to be done to further increase the experimental PPW output of these promising PV technologies.
9 September 2019 in Journal of Materials Chemistry C
Although CH3NH3PbI3 perovskite has attracted enormous scientific attention over the last decade or so, important information on the charge extraction dynamics and recombination processes in perovskite devices is still missing.