Here we present a roadmap on Photonic metasurfaces. This document consists of a number of perspective articles on different applications, challenge areas or technologies underlying photonic metasurfaces. Each perspective will introduce the topic, present a state of the art as well as give an insight into the future direction of the subfield.
Outdoor devices comprising materials with mid-IR emissions at the atmospheric window (8–13 μm) achieve passive heat dissipation to outer space (~ − 270 °C), besides the atmosphere, being suitable for cooling applications. Recent studies have shown that the micro-scale photonic patterning of such materials further enhances their spectral emissivity. This approach is crucial, especially for daytime operation, where solar radiation often increases the device heat load. However, micro-scale patterning is often sub-optimal for other wavelengths besides 8–13 μm, limiting the devices’ efficiency. Here, we show that the superposition of properly designed in-plane nano- and micro-scaled periodic patterns results in enhanced device performance in the case of solar cell applications. We apply this idea in scalable, few-micron-thick, and simple single-material (glass) radiative coolers on top of simple-planar Si substrates, where we show an ~ 25.4% solar absorption enhancement, combined with a ~ ≤ 5.8 °C temperature reduction. Utilizing a coupled opto-electro-thermal modeling we evaluate our nano-micro-scale cooler also in the case of selected, highly-efficient Si-based photovoltaic architectures, where we achieve an efficiency enhancement of ~ 3.1%, which is 2.3 times higher compared to common anti-reflection layers, while the operating temperature of the device also decreases. Besides the enhanced performance of our nano-micro-scale cooler, our approach of superimposing double- or multi-periodic gratings is generic and suitable in all cases where the performance of a device depends on its response on more than one frequency bands.
Solar cell technology requires materials that are efficient, lightweight, and stable. Organic–inorganic lead halide perovskite- and polymer-based bulk heterojunction solar cells have emerged as highly promising, ultralightweight, flexible, and highly efficient power sources. However, they suffer from limited stability, which is significantly affected by the cell temperature, in addition to other factors like oxidization and moisture in the absence of appropriate encapsulation. Here, by performing a coupled opto-electro-thermal modeling, we report the design of a compatible and novel, ultrathin, submicron, multipurpose organic–inorganic hybrid radiative cooling coating/scheme that, by providing photonic cooling, decreases the cell temperature by up to ∼7.2 K compared to the encapsulated ultrathin solar cell technology, without requiring any external energy input. In addition to the significant temperature reduction, the power conversion efficiency of cells also increases, fulfilling the requirements of high performance at minimal weight, combined with high stability and flexibility, paving the way for next-generation, stable and efficient, ultralightweight solar cells.
Solution-processed, lead halide-based perovskite solar cells have recently overcome important challenges, offering low-cost and high solar power conversion efficiencies. However, they still undergo unoptimized light collection due mainly to the thin (∼350 nm) polycrystalline absorber layers. Moreover, their high toxicity (due to the presence of lead in perovskite crystalline structures) makes it necessary that the thickness of the absorber layers to be further reduced. Here we address these issues via embedding spherical plasmonic nanoparticles of various sizes, composition, concentrations, and vertical positions, in realistic halide-based perovskite solar cells. We theoretically show that plasmon-enhanced near-field effects and scattering leads to a device photocurrent enhancement up to ∼7.3% when silver spheres are embedded inside the perovskite layer. An even further enhancement, up to ∼12%, is achieved with the combination of silver spheres in perovskite and aluminum spheres inside the hole transporting layer (PEDOT:PSS). The proper involvement of nanoparticles allows the employment of much thinner perovskite layers (up to 150 nm), reducing thus significantly the toxicity. Providing the requirements related to the design parameters of nanoparticles, our study establishes guidelines for a future development of highly-efficient, environmentally friendly and low-cost plasmonic perovskite solar cells.
Ultrathin, solution-processed emerging solar cells with high power-per-weight (PPW) outputs demonstrate unique potential for applications where low weight, high power output, and flexibility are indispensable. The following perspective explores the literature of emerging PVs and highlights the maximum reported PPW values of perovskite solar cells (PSCs) 29.4 W/g, organic solar cells (OSCs) 32.07 W/g, and quantum dot solar cells 15.02 W/g, respectively. The record PPW values of OSCs and PSCs are approximately one order of magnitude higher compared to their inorganic ultrathin solar cells counterparts (approximately 3.2 W/g for CIGS and a-Si). This consists emerging PVs, very attractive for a variety of applications where the PPW is the key parameter. In particular, both OSCs and PSCs can be implemented in different scenarios of applications (indoor and biocompatible applications for OSCs and outdoor and high-energy radiation conversion conditions for the PSCs) due to their unique optoelectronic and physiochemical properties. Finally, our theoretical optical and electrical simulation and optimization study for the most promising and well-suited PV technologies showed an impressive maximum realistic theoretical PPW limit of 74.3 and 93.7 W/g for PSCs and OSCs, respectively. Our finding in the theoretical section shows that the experimental results achieved in the literature of PSCs and OSCs toward high PPW outputs is not quite close to the theoretical maximum (35% and 40% of the theoretical maximum for OSCs and PSCs, respectively), and thus, more work needs to be done to further increase the experimental PPW output of these promising PV technologies.
In this work we study in-depth the antireflection and filtering properties of ultrathin-metal-film-based transparent electrodes (MTEs) integrated in thin-film solar cells. Based on numerical optimization of the MTE design and the experimental characterization of thin-film perovskite solar cell (PSC) samples, we show that reflection in the visible spectrum can be strongly suppressed, in contrast to common belief (due to the compact metal layer). The optical loss of the optimized electrode (~ 2.9%), composed of a low-resistivity metal and an insulator, is significantly lower than that of a conventional transparent conductive oxide (TCO ~ 6.3%), thanks to the very high transmission of visible light within the cell (> 91%) and low thickness (< 70 nm), whereas the reflection of infrared light (~ 70%) improves by > 370%. To assess the application potentials, integrated current density > 25 mA/cm2, power conversion efficiency > 20%, combined with vastly reduced device heat load by 177.1 W/m2 was achieved in state-of-the-art PSCs. Our study aims to set the basis for a novel interpretation of composite electrodes/structures, such as TCO–metal–TCO, dielectric–metal–dielectric or insulator–metal–insulator, and hyperbolic metamaterials, in high-efficiency optoelectronic devices, such as solar cells, semi-transparent, and concentrated systems, and other electro-optical components including smart windows, light-emitting diodes, and displays.