17 January 2025 in IEEE Transactions on Industrial Electronics
Insufficient reactive voltage support and power angle divergence are critical issues threatening the stable operation of virtual synchronous generators (VSG) under faults. However, existing research lacks comprehensive transient control methods considering both voltage and transient angle stability and fails to explore transient enhancement strategies after fault current limiting. In this paper, a fault circuit model for VSG considering current limiting is established, revealing the impact mechanisms of different Q-U controller on voltage transient support in phasor diagrams. Subsequently, the influence of fault current limiting on transient angle stability is discussed. Based on this, a transient control method for VSG considering both voltage support and transient angle stability is proposed. This method utilizes virtual capacitance and virtual resistance to modify Q-U and P-f controllers, respectively, to achieve reactive voltage support and transient angle suppression under faults. Furthermore, the application of the proposed method under fault current limiting is discussed, and the idea of fault current redistribution is proposed to enhance voltage support strength and reduce fault instability risk. Finally, hardware-in-loop experiments validate the correctness and effectiveness of the theoretical analysis and proposed.
1 January 2024 in IEEE Transactions on Industrial Electronics
Offshore wind power through flexible dc transmission system faces the challenge of comprehensively improving the transient and steady-state performance. However, existing control strategies often fail to address both simultaneously. This article proposes a coordinated control strategy based on the hybrid modular multilevel converter that can enhance the transient and steady-state resilience of the flexible dc transmission system. First, the coupling relationship between the submodule capacitor voltage and active power is analyzed, and submodule virtual capacitance control (SVCC) is proposed to enhances the dc inertia. Second, the rate of change of dc current is introduced into the dc control loop. The virtual inductance control (VIC) is proposed, which can actively limit the rate of rise of dc current at the initial stage of dc fault. The link of the hysteresis comparator is designed to avoid frequent misoperation of VIC control caused by dc voltage disturbance. At the same time, the positive adjustment capability of the SVCC is used to reduce the fluctuation of the capacitor voltage during the dc fault ride-through process, avoid the switching of the working mode of the ac loop controller, and realize the cooperative control of the transient and steady-state performance. Finally, the effectiveness of the proposed control strategy is verified through simulations and experiment.
22 May 2024 in IEEE Transactions on Power Delivery
The increasing significance of regulating transient energy and efficiently clearing DC short-circuit faults accompanies the rapid growth of offshore wind power. To address limitations such as single functionality and low device utilization in DC energy dissipation devices in flexible HVDC transmission systems for offshore wind power, this paper researches the technology of transient energy regulation and reuse, and a hybrid chopper topology with fault energy absorption and reuse function is proposed. The topology's structure, control strategy, and design methodology for electrical parameters are defined. Simulation is employed to verify the electrical characteristics of the hybrid chopper topology and its performance in an offshore wind power grid-connected system. When compared to traditional regulation methods, the proposed topology-based approach offers the advantages of energy absorption and fault location function for various DC faults. This method effectively maximizes the utilization of DC fault energy, resulting in higher device utilization rates and a broader range of functionalities.
1 January 2026 in IEEE Transactions on Power Delivery