7 January 2022 in Electrochemical Science Advances
The reduction of in an electrochemical reactor using electrical energy is a promising approach to implement a more sustainable carbon economy and to replace fossil fuels with renewable carbon sources. Conventionally used solid plate electrodes are limited by poor mass transport of the reactants. Gas diffusion electrodes (GDEs) can overcome this limitation and have gained industrial relevance during the last decades. A comprehensive understanding of transport and conversion phenomena within such porous electrodes is not yet well developed. Here, we report a one-dimensional steady state model of the GDE to investigate the influence of relevant operational parameters and GDE properties on reduction. The results indicate the importance of controlling the local reaction environment, that is, the reactant concentration and the pH value, by tuning the electrolyte and gas composition, and flow rate as well as the catalyst layer properties.
22 July 2024 in Angewandte Chemie International Edition
Electrochemical reduction of CO2 poses a vast potential to contribute to a defossilized industry. Despite tremendous developments within the field, mass transport limitations, carbonate salt formation, and electrode degradation mechanisms still hamper the process performance. One promising approach to tweak CO2 electrolysis beyond today's limitations is pulsed electrolysis with potential cycling between an operating and a regeneration mode. Here, we rigorously model the boundary layer at a silver electrode in pulsed operation to get profound insights into the dynamic reorganization of the electrode microenvironment. In our simulation, pulsed electrolysis leads to a significant improvement of up to six times higher CO current density and 20 times higher cathodic energy efficiency when pulsing between −1.85 and −1.05 V vs SHE compared to constant potential operation. We found that elevated reactant availability in pulsed electrolysis originates from alternating replenishment of CO2 by diffusion and not from pH‐induced carbonate and bicarbonate conversion. Moreover, pulsed electrolysis substantially promotes carbonate removal from the electrode by up to 83 % compared to constant potential operation, thus reducing the risk of salt formation. Therefore, this model lays the groundwork for an accurate simulation of the dynamic boundary layer modulation, which can provide insights into manifold electrochemical conversions.
14 May 2023 in Advanced Sustainable Systems
Reducing carbon dioxide to value‐added chemicals by electrolysis is a promising strategy to substitute fossil‐based processes. Research on CO2 electrolysis has vastly progressed, focusing on catalysis and electrode design, leaving an essential question on the central part of the electrolyzer: Which type of ion exchange membrane is best suited for CO2 electrolysis from an economic perspective? To address this question, holistic process optimization of CO2 reduction and product purification is applied. The findings demonstrate that CO2 electrolysis with an anion exchange membrane shows competitive production costs for CO of 796 €/tCO, outperforming cation exchange and bipolar membranes. Unlike often described, the CO2 pumping effect does not significantly impair the economics but offers an efficient indirect regeneration of dissociated CO2. Furthermore, the results emphasize selective reduction of CO2 rather than co‐electrolysis of CO2 and H2O. While pointing to a positive economic perspective, life‐cycle assessment highlights the need to minimize CO2 emissions related to electricity consumption and incomplete CO2 utilization.
26 June 2025 in Electrochimica Acta
22 July 2024 in Angewandte Chemie
Electrochemical reduction of CO2 poses a vast potential to contribute to a defossilized industry. Despite tremendous developments within the field, mass transport limitations, carbonate salt formation, and electrode degradation mechanisms still hamper the process performance. One promising approach to tweak CO2 electrolysis beyond today's limitations is pulsed electrolysis with potential cycling between an operating and a regeneration mode. Here, we rigorously model the boundary layer at a silver electrode in pulsed operation to get profound insights into the dynamic reorganization of the electrode microenvironment. In our simulation, pulsed electrolysis leads to a significant improvement of up to six times higher CO current density and 20 times higher cathodic energy efficiency when pulsing between −1.85 and −1.05 V vs SHE compared to constant potential operation. We found that elevated reactant availability in pulsed electrolysis originates from alternating replenishment of CO2 by diffusion and not from pH‐induced carbonate and bicarbonate conversion. Moreover, pulsed electrolysis substantially promotes carbonate removal from the electrode by up to 83 % compared to constant potential operation, thus reducing the risk of salt formation. Therefore, this model lays the groundwork for an accurate simulation of the dynamic boundary layer modulation, which can provide insights into manifold electrochemical conversions.
7 July 2026 in Journal of CO2 Utilization