Wenzel Plischka

Wenzel Plischka

Auto-generated profile, based on publicly available information

Wenzel Plischka

Chemical Process Engineering AVT.CVT RWTH Aachen University Forckenbeckstraße 51 52074 Aachen Germany

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 July 2024 in Angewandte Chemie International Edition
Verified
Journal Article
Open access
MHMatthias Heßelmann
Matthias Heßelmann
DFDaniel Felder
Daniel Felder
WPWenzel Plischka
Wenzel Plischka
SNSajad Nabi
Sajad Nabi
JLJohn Linkhorst
John Linkhorst
RKRobert Keller
Robert Keller
Electrochemical reduction of CO2 poses a vast potential to contribute to a defossilized industry. Despite tremendous developments within the field, mass transport limitations, carbonate salt formation, and electrode degradation mechanisms still hamper the process performance. One promising approach to tweak CO2 electrolysis beyond today's limitations is pulsed electrolysis with potential cycling between an operating and a regeneration mode. Here, we rigorously model the boundary layer at a silver electrode in pulsed operation to get profound insights into the dynamic reorganization of the electrode microenvironment. In our simulation, pulsed electrolysis leads to a significant improvement of up to six times higher CO current density and 20 times higher cathodic energy efficiency when pulsing between −1.85 and −1.05 V vs SHE compared to constant potential operation. We found that elevated reactant availability in pulsed electrolysis originates from alternating replenishment of CO2 by diffusion and not from pH‐induced carbonate and bicarbonate conversion. Moreover, pulsed electrolysis substantially promotes carbonate removal from the electrode by up to 83 % compared to constant potential operation, thus reducing the risk of salt formation. Therefore, this model lays the groundwork for an accurate simulation of the dynamic boundary layer modulation, which can provide insights into manifold electrochemical conversions.

26 June 2025 in Electrochimica Acta
Verified
Journal Article
Open access
WPWenzel Plischka
Wenzel Plischka
MHMatthias Heßelmann
Matthias Heßelmann
MWMatthias Wessling
Matthias Wessling
RKRobert Keller
Robert Keller

30 October 2024 in Advanced Sustainable Systems
Verified
Journal Article
Open access
RKRobin Kupec
Robin Kupec
WPWenzel Plischka
Wenzel Plischka
EDEdiz Duman
Ediz Duman
SSSelina Schneider
Selina Schneider
CWClaudia Weidlich
Claudia Weidlich
MSMarkus Stöckl
Markus Stöckl
Ferrate (Fe(VI)) is of great interest in energy storage solutions, organic synthesis, and wastewater treatment due to its decent oxidation potential and non‐toxic end‐product formation, making it a green oxidizer. The electrochemical generation of ferrate in NaOH at current densities of j ≥ 100 mA cm −2 is presented using low‐cost sacrificial iron anodes, mild steel, and spheroidal graphite cast iron (ductile iron). Under optimized reaction parameters with 40 wt.% (14 m ) NaOH and a ZrO 2 ‐based diaphragm, spheroidal graphite cast iron shows no signs of passivation in 5 h experiments even at j = 150 mA cm −2 . The results are used in a novel electrolysis cell with a combined geometric anode surface area of 230 cm 2 , incorporated in a mini‐plant suitable for continuous synthesis. This setup produces a peak ferrate concentration of 10.1 g L −1 (84 m m ) after 5 h in 1.6 L anolyte volume, resulting in a total ferrate mass of 16.2 g. Optimal electrolysis temperatures are between 35 and 50 °C. The highest current efficiency is 63.0%, and the lowest specific energy consumption is 9.2 kWh kg −1 ferrate. The presented work is an essential step toward the continuous electrochemical synthesis of ferrate using sacrificial anodes under basic conditions.

22 July 2024 in Angewandte Chemie
Verified
Journal Article
Open access
MHMatthias Heßelmann
Matthias Heßelmann
DFDaniel Felder
Daniel Felder
WPWenzel Plischka
Wenzel Plischka
SNSajad Nabi
Sajad Nabi
JLJohn Linkhorst
John Linkhorst
RKRobert Keller
Robert Keller
Electrochemical reduction of CO2 poses a vast potential to contribute to a defossilized industry. Despite tremendous developments within the field, mass transport limitations, carbonate salt formation, and electrode degradation mechanisms still hamper the process performance. One promising approach to tweak CO2 electrolysis beyond today's limitations is pulsed electrolysis with potential cycling between an operating and a regeneration mode. Here, we rigorously model the boundary layer at a silver electrode in pulsed operation to get profound insights into the dynamic reorganization of the electrode microenvironment. In our simulation, pulsed electrolysis leads to a significant improvement of up to six times higher CO current density and 20 times higher cathodic energy efficiency when pulsing between −1.85 and −1.05 V vs SHE compared to constant potential operation. We found that elevated reactant availability in pulsed electrolysis originates from alternating replenishment of CO2 by diffusion and not from pH‐induced carbonate and bicarbonate conversion. Moreover, pulsed electrolysis substantially promotes carbonate removal from the electrode by up to 83 % compared to constant potential operation, thus reducing the risk of salt formation. Therefore, this model lays the groundwork for an accurate simulation of the dynamic boundary layer modulation, which can provide insights into manifold electrochemical conversions.

7 July 2026 in Journal of CO2 Utilization
Verified
Journal Article
Open access
WPWenzel Plischka
Wenzel Plischka
MHMatthias Heßelmann
Matthias Heßelmann
MWMatthias Wessling
Matthias Wessling
RKRobert Keller
Robert Keller

25 May 2026 in Journal of Membrane Science
Verified
Journal Article
Open access
RDR. Dunkel
R. Dunkel
MGM. Garthe
M. Garthe
EEE. Evdochenko
E. Evdochenko
NKN. Koeller
N. Koeller
WPW. Plischka
W. Plischka
MWMatthias Wessling
Matthias Wessling