This work addresses the problem of instability occurring in the voltage control mode of a non-minimum phase (NMP) DC-DC boost converter. To solve this instability issue in the presence of uncertainties and the external disturbances, quantitative feedback theory (QFT) is adapted to systematically design a robust proportional integral derivative (PID) controller, which is realized using only sensed output voltage as feedback. The advantages of the proposed PID design using the QFT are: (i) it eliminates the burden of tedious and ad-hoc tuning of PID gains using the conventional PID design approaches, (ii) current measurement is not required, (iii) disturbance dynamics (input voltage and load current variations) are included in the design stage itself, which further enhances the disturbance rejection performance of the output voltage, and (iv) it allows direct design for the non-minimum phase boost converter despite the bandwidth limitations. Extensive simulations and experiments are carried out to validate the efficacy of the proposed PID controller in the presence of the external disturbances and compared its superiority over a conventional PID controller.
3 June 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This work addresses the disturbance rejection problem of a non-minimum phase DC-DC boost converter operating in the continuous conduction mode (CCM) using a novel robust PID controller design method. The proposed idea is to design the controller using the equivalent feedforward formulation of the modified direct synthesis (MDS) approach. The advantages of the proposed MDS design are (i) systematic incorporation of disturbance dynamics and the converter dynamics explicitly in the controller design to reduce the complex tuning effort of the controller parameters, (ii) allowing the converter to operate close to the performance limit set by the zero in the right half plane (RHP), (iii) the closed-loop performance specifications can be incorporated into the desired loop response using only single tuning parameter based on Bode’s gain cross-over frequency inequality, (iv) attenuates the loop gain to improve the disturbance rejection and (v) realization of controller requires only output voltage as a feedback signal. The strength of the proposed MDS method is compared with the internal model control (IMC) method in both simulations and experiments. Based on these responses, the proposed PID ensures robust performance to the model-plant mismatch and allows the output voltage to quickly recover back to the operating voltage in the presence of external disturbances with less inductor current.
This paper proposes a systematic feedback controller design methodology for multi-input multi-output (MIMO) uncertain systems using the quantitative feedback theory (QFT). To achieve this goal, the model matching problem was considered and the inversion feedforward controller was designed to improve control performance while reducing the demand on feedback control alone. The proposed method is formulated based on the concept of equivalent disturbance attenuation (EDA) approach in which the uncertain system problem is converted into an external disturbance rejection problem based on a nominal system. This proposed approach exhibiting non-sequential design method result in the suboptimal solution showing design simplicity and computational efficiency compared to the existing method. In order to validate the effectiveness of the proposed control methodology, the MIMO magnetic levitation system as adopted and control performances such as time response were presented in both time and frequency domains.
12 January 2021 in IEEE Transactions on Circuits and Systems II: Express Briefs
This brief presents a simple and robust design technique based on quantitative feedback theory (QFT) to solve the tracking error specification (TES) problem. The TES problem is converted into an equivalent disturbance attenuation (EDA) problem wherein the plant uncertainties are translated into equivalent external disturbance sets. The design problem then becomes a simple nominal disturbance rejection problem. The main advantage of the proposed technique is that they are simple, computationally efficient, and require less control effort (overdesign) due to the nominal sensitivity function formulation. The computational simplicity of the proposed methods makes them potentially more suitable for handling design problems involving a large number of uncertain plant parameters. Experiments are conducted on a laboratory electro-mechanical plant emulator system to demonstrate the efficacy of the proposed design method.