The permeability of coal seam is one of the main factors restricting the safe and efficient production of Coal Bed Methane (CBM). In order to improve the extraction efficiency of CBM and reduce the probability of coal and gas outburst, it is of great significance to adopt artificial measures to enhance the fracture network of coal seam. In this paper, a field test of air cannons after hydraulic punching was carried out. The results showed that the gas concentration and gas flow rate were greatly improved, which indicates that the pores and fractures of the coal reservoir are effectively connected. The pure gas extraction volume increased by about 0.7–2.2 times than of non-blasting. According to the experimental results, the paper studies the action mechanism of air cannons, mainly including three aspects of action. The first is the continuous impact of air cannons, which gradually breaks the coal body around the hole, and forms a fracture network of different sizes in the coal body. Air cannon blasting performs secondary treatment on the punched holes, accelerates and promotes the creep of the coal body around the borehole to the free surface, makes the cracks develop deeper, and expands the pressure relief range. Third, it has the function of pulse gas injection to displace the CH4, which broke the original adsorption balance, promoted the conversion of the adsorbed gas to the free state. The role of three aspects ultimately achieves efficient gas drainage.
An oily coal dust that is difficult to remove is easily formed on the surface of coal mining equipment. However, high-power equipment generates a higher surface temperature, which can promote spontaneous combustion of coal, especially in the oxygen-enriched environment of the refuge chamber. This study investigated the effects of lubricating oil on coal spontaneous combustion under different oxygen concentrations using a temperature-programmed experiment, Fourier transform infrared spectroscopy and thermogravimetry-differential scanning calorimetry. The results show that the activation energy is inversely proportional to the lubricating oil content during the low-temperature oxidation stage. With a mass ratio of coal to lubricating oil of 2:1, compared with raw coal, the activation energy was reduced by 6.46 KJ/mol. With a higher lubricating oil content of coal and an increased oxygen concentration, the absorption peak intensities of -CH3, -CH2, -OH were lower and the C-O absorption peak intensity was higher. Therefore, lubricating oil promotes coal spontaneous combustion and the promoting effect is proportional to the lubricating oil content and oxygen concentration. Furthermore, the difference in heat released indicates that the effect of lubricating oil on coal spontaneous combustion is the result of the interaction between coal oxidation and lubricating oil oxidation.