15 November 2021 in Applied Physics Letters
GeSn alloys have been regarded as a potential lasing material for a complementary metal–oxide–semiconductor-compatible light source. Despite their remarkable progress, all GeSn lasers reported to date have large device footprints and active areas, which prevent the realization of densely integrated on-chip lasers operating at low power consumption. Here, we present a 1D photonic crystal nanobeam with a very small device footprint of 7 μm2 and a compact active area of ∼1.2 μm2 on a high-quality GeSn-on-insulator substrate. We also report that the improved directness in our strain-free nanobeam lasers leads to a lower threshold density and a higher operating temperature compared to the compressive strained counterparts. The threshold density of the strain-free nanobeam laser is ∼18.2 kW cm−2 at 4 K, which is significantly lower than that of the unreleased nanobeam laser (∼38.4 kW cm−2 at 4 K). Lasing in the strain-free nanobeam device persists up to 90 K, whereas the unreleased nanobeam shows quenching of lasing at a temperature of 70 K. Our demonstration offers an avenue toward developing practical group-IV light sources with high-density integration and low power consumption.
22 November 2022 in Nano Letters
22 August 2019 in IEEE Electron Device Letters
The present work investigated the electrical characteristics of Corbino structure p-type tin monoxide (SnO) thin-film transistors (TFTs) and demonstrated a high-performance complementary logic inverter composed of Corbino p-type SnO and n-type indium-gallium-zinc oxide (IGZO) TFTs. Experimental data showed that the Corbino p-type SnO TFT exhibited an almost infinite output resistance beyond pinch-off in the outer drain condition. The observed phenomenon was mainly attributed to the scaling down of the effective channel width in proportion to the effective channel length. By using the very high output resistance of the Corbino structure TFTs, we fabricated the high-gain complementary logic inverter composed of Corbino p-type SnO and n-type IGZO TFTs. The Corbino TFT-based complementary logic inverter showed a voltage gain of 92.4 at a supplied voltage of 10 V, which was significantly higher than that of 18.7 obtained from the complementary logic inverter composed of the conventional rectangular shaped TFTs.
16 May 2025 in Science Advances
Semiconductor nanowires have shown great potential for enabling ultracompact lasers for integrated photonics platforms. Despite the impressive progress in developing nanowire lasers, their integration into Si photonics platforms remains challenging largely because of the use of III-V and II-VI semiconductors as gain media. Recently, group IV nanowires, particularly direct bandgap GeSn nanowires capable of emitting above 2 μm, have emerged as promising cost-effective gain media for Si-compatible nanowire lasers, but there has been no successful demonstration of lasing from this seemingly promising nanowire platform. Herein, we report the experimental observation of lasing above 2 μm from a single bottom-up grown GeSn nanowire. By harnessing strain engineering and optimized cavity designs simultaneously, the single GeSn nanowire achieves an amplified material gain that can sufficiently overcome minimized optical losses, resulting in single-mode lasing with an ultralow threshold of ~5.3 kilowatts per square centimeter. Our finding paves the way for all–group IV mid-infrared photonic-integrated circuits with Si-compatible lasers for on-chip classical and quantum applications.
29 April 2024 in Nature Nanotechnology
16 May 2022 in Applied Physics Letters
GeSn alloys are a promising emerging complementary metal–oxide–semiconductor compatible technology for applications in photonics and electronics. However, the unavoidable intrinsic compressive strain introduced during epitaxial growth has prevented researchers from pushing the performance of GeSn devices to the limit and realizing real-world applications. In this paper, we present a straightforward geometric strain-inversion technique that harnesses the harmful compressive strain to achieve beneficial tensile strain in GeSn nanowires, drastically increasing the directness of the band structure. We achieve ∼2.67% uniaxial tensile strain in ∼120 nm wide nanowires, surpassing other values reported thus far. Unique pseudo-superlattices comprising of indirect and direct bandgap GeSn are demonstrated in a single material only by applying a periodic tensile strain. Improved directness in tensile-strained GeSn significantly enhances the photoluminescence by a factor of ∼2.5. This work represents a way to develop scalable band-engineered GeSn nanowire devices with lithographic design flexibility. This technique can be potentially applied to any layer with an intrinsic compressive strain, creating opportunities for unique tensile strained materials with diverse electronic and photonic applications.