15 April 2019 in ACS Applied Energy Materials
1 July 2013 in Current Applied Physics
22 January 2019 in ACS Applied Materials & Interfaces
4 November 2013 in Journal of Materials Chemistry A
An effective way of synthesizing graphene-wrapped Li4Ti5O12 particles was developed by solid-state reaction between graphene oxide-wrapped P25 (TiO2) and Li2CO3. Compared to the previously reported graphene/Li4Ti5O12 composites, prior wrapping of TiO2 with subsequent chemical lithiation led to more effectively confined Li4Ti5O12. The Li4Ti5O12 tightly bound by graphene exhibited a remarkable specific capacity of 147 mA h g−1 at a rate of 10 C (1 C = 175 mA g−1) after 100 cycles. This rate capability is one of the highest values among reported Li4Ti5O12 with 150 ± 50 nm grains. The improved rate capability was attributed to the enhanced electronic conductivity of each Li4Ti5O12 grain via uniform graphene wrapping, with single-grain growth during annealing from the initial ∼25 nm TiO2 nanoparticles enclosed by outer graphene sheets. Graphene-eliminated Li4Ti5O12 by thermal decomposition was also directly compared to the graphene-coated sample, to clarify the role of graphene with nearly equivalent particle size/morphology distributions.
18 March 2019 in Scientific Reports
The role of Cl in halide hybrid perovskites CH3NH3PbI3(Cl) (MAPbI3(Cl)) on the augmentation of grain size is still unclear although many reports have referred to these phenomena. Herein, we synthesized MAPbI3(Cl) perovskite films by using excess MACl-containing precursors, which exhibited approximately an order of magnitude larger grain size with higher -preferred orientation compared with that from stoichiometric precursors. Comprehensive mechanisms for the large grain evolution by Cl incorporation were elucidated in detail by correlating the changes in grain orientation, distribution of grain size, and the remaining Cl in the perovskite during thermal annealing. In the presence of Cl, - and -oriented grains grew faster than other grains at the initial stage of annealing. Further annealing led to the dissipation of Cl, resulting in the shrinkage of grains while grains continuously grew, as analyzed by x-ray rocking curve and diffraction. As a result of reduced grain boundaries and enhanced texture, the trap density of perovskite solar cells diminished by ~10% by incorporating MACl in the precursor, resulting in a fill factor more than 80%.
1 October 2016 in Solar Energy Materials and Solar Cells