The role of Cl in halide hybrid perovskites CH3NH3PbI3(Cl) (MAPbI3(Cl)) on the augmentation of grain size is still unclear although many reports have referred to these phenomena. Herein, we synthesized MAPbI3(Cl) perovskite films by using excess MACl-containing precursors, which exhibited approximately an order of magnitude larger grain size with higher -preferred orientation compared with that from stoichiometric precursors. Comprehensive mechanisms for the large grain evolution by Cl incorporation were elucidated in detail by correlating the changes in grain orientation, distribution of grain size, and the remaining Cl in the perovskite during thermal annealing. In the presence of Cl, - and -oriented grains grew faster than other grains at the initial stage of annealing. Further annealing led to the dissipation of Cl, resulting in the shrinkage of grains while grains continuously grew, as analyzed by x-ray rocking curve and diffraction. As a result of reduced grain boundaries and enhanced texture, the trap density of perovskite solar cells diminished by ~10% by incorporating MACl in the precursor, resulting in a fill factor more than 80%.
1 October 2016 in Solar Energy Materials and Solar Cells
High power conversion efficiency and device stabilization are two major challenges for CH3NH3PbI3 (MAPbI3) perovskite solar cells to be commercialized. Herein, we demonstrate a diffusion-engineered perovskite synthesis method using MAI/ethanol dipping, and compared it to the conventional synthesis method from MAI/iso-propanol. Diffusion of MAI/C2H5OH into the PbCl2 film was observed to be more favorable than that of MAI/C3H7OH. Facile perovskite conversion from ethanol and highly-crystalline MAPbI3 with minimized impurities boosted the efficiency from 5.86% to 9.51%. Additionally, we further identified the intermediates and thereby the reaction mechanisms of PbCl2 converting into MAPbI3. Through straightforward engineering to enhance the surface morphology as well as the crystallinity of the perovskite with even faster conversion, an initial power conversion efficiency of 11.23% was obtained, in addition to superior stability after 30 days under an ambient condition.