Yingzhou Peng

Yingzhou Peng

Auto-generated profile, based on publicly available information

Yingzhou Peng

School of Electrical Engineering, Hunan University, Hunan, China

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 July 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YPYingzhou Peng
Yingzhou Peng
SZShuai Zhao
Shuai Zhao
Huai WangHuai Wang
Huai Wang
This paper proposes a health indicator estimation method based on digital-twin concept aiming for condition monitoring of power electronic converters. The method is non-invasive, without additional hardware circuits, and calibration requirements. An application for a Buck DC-DC converter is demonstrated with theoretical analyses, practical considerations, and experimental verifications. The digital replica of an experimental prototype is established, which includes the power stage, sampling circuit, and a close-loop controller. Particle Swarm Optimization (PSO) algorithm is applied to estimate the unknown circuit parameters of interest based on the incoming data from both the digital twin and the physical prototype. The outcomes of the study serve as a key step for achieving non-invasive, cost-effective and robust condition monitoring for power electronic converters.

20 May 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
SZShuai Zhao
Shuai Zhao
YPYingzhou Peng
Yingzhou Peng
YZYi Zhang
Yi Zhang
Huai WangHuai Wang
Huai Wang
Physics-informed machine learning (PIML) has been emerging as a promising tool for applications with domain knowledge and physical models. To uncover its potentials in power electronics, this article proposes a PIML-based parameter estimation method demonstrated by a case study of dc–dc Buck converter. A deep neural network and the dynamic models of the converter are seamlessly coupled. It overcomes the challenges related to training data, accuracy, and robustness which a typical data-driven approach has. This exemplary application envisions to provide a new perspective for tailoring existing machine learning tools for power electronics.

25 January 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
SZShuai Zhao
Shuai Zhao
YPYingzhou Peng
Yingzhou Peng
FYFei Yang
Fei Yang
EUEnes Ugur
Enes Ugur
BABilal Akin
Bilal Akin
Huai WangHuai Wang
Huai Wang
Condition monitoring of power devices is highly critical for safety and mission-critical power electronics systems. Typically, these systems are subjected to noise in harsh operational environment contaminating the degradation measurements. In dynamic applications, the system duty cycle may not be periodic and results in aperiodic degradation measurements. Both these factors negatively affect the health assessment performance. In order to address these challenges, this article proposes a health state estimation and remaining useful life prediction method for power devices in the presence of noisy and aperiodic degradation measurements. For this purpose, three-source uncertainties in the degradation modeling, including the temporal uncertainty, measurement uncertainty, and device-to-device heterogeneity, are formulated in a Gamma state-space model to ensure health assessment accuracy. In order to learn the device degradation behavior, a model parameter estimation method is developed based on a stochastic expectation-maximization algorithm. The accuracy and robustness of the proposed method are verified by numerical analysis under various noise levels. Finally, the findings are justified using SiC metal-oxide-semiconductor field-effect transistors (MOSFETs) accelerated aging test data.

2 April 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YPYingzhou Peng
Yingzhou Peng
Huai WangHuai Wang
Huai Wang
This letter proposes a simplified converter-level on-state voltage measurement circuit for power semiconductor devices, without an external power supply and self-power circuit. It has a reduced component count and circuit complexity, and retains the plug-and-play feature, comparable measurement accuracy, and dynamic response as recently reported methods. A proof-of-concept prototype is developed and tested for a three-phase inverter application.

23 November 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YPYingzhou Peng
Yingzhou Peng
QWQIAN WANG
QIAN WANG
Haoran WangHaoran Wang
Haoran Wang
Huai WangHuai Wang
Huai Wang
Temperature sensitive electrical parameters (TSEP) provide an indirect and noninvasive method for on-line junction temperature estimation of power semiconductor devices. It is known that the fundamental of TSEP-based methods is to calibrate the relationship between TSEP and junction temperature in advance. However, the calibration methods in the literature need to open the module, require pretesting, or record the operating data of a converter in the entire power rating range, which are inconvenient in field applications. This article proposes an on-line and noninvasive calibration method by measuring the data at three operating states that are already existed in the regular converter operation. It is achieved by measuring the accessible heatsink/case temperature and TSEP during converter regular operation. The concept, implementation, and error analysis of the proposed method are presented in this article. Experimental verification is given to prove the effectiveness, accuracy, and convenience of the proposed method.

20 July 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
YPYingzhou Peng
Yingzhou Peng
YSYanfeng Shen
Yanfeng Shen
Huai WangHuai Wang
Huai Wang
This letter proposes a converter-level method for measuring the on-state voltages of all power semiconductors in a single-phase inverter by using a single circuit only. The proposed circuit distinguishes itself by connecting to the middle-point of each phase-leg, instead of the two power-terminals of individual devices as conventional methods do. It has the advantages of reduced circuit complexity, size, cost, and ease of connection. The principle and theoretical analysis of the proposed converter-level method are discussed. A case study on a single-phase full-bridge inverter is demonstrated to prove the concept.