Professor of Medicine School of Medicine Chief Division of Gastroenterology Western Reserve University University Hospitals of Cleveland Cleveland Hyderabad Beijing Ohio India
Auto-generated profile, based on publicly available information
Hong Jin Kong
Professor of Medicine School of Medicine Chief Division of Gastroenterology Western Reserve University University Hospitals of Cleveland Cleveland Hyderabad Beijing Ohio India
The beam combination method using stimulated Brillouin scattering phase conjugate mirrors (SBS-PCMs) is a promising technique for a high energy and high power laser output operating with a high repetition rate. The two-beam combined system was previously demonstrated with an amplitude dividing method. A four-beam combined laser system with amplitude dividing method is demonstrated in this work, and the phase stabilization experiment of this system is performed using the self phase control and the long-term stabilization technique. The phase differences between the SBS waves are stabilized with λ/30 and the fluctuation of the four-beam combined output energy is 6.16% during 2000 shots (200 s).
We report on the experimental studies of a diode-end-pumped passively Q-switched Yb:Y2O3 ceramic laser with a GaAs wafer simultaneously as saturable absorber and output coupler. The Q-switched operation of the laser has an average output power of 0.51 W with a 17.7-W incident pump power. The Q-switched pulses with pulse energy of 7.7 µJ have been achieved. The minimum pulse width is measured to be about 50 ns with a repetition rate of 52.6 KHz. To our knowledge, this is the first demonstration on a passively Q-switched Yb:Y2O3 ceramic laser.
A single-frequency erbium fibre laser operating at 1.534 µm is demonstrated. Single frequency operation is achieved using the twisted mode technique. Using a self-heterodyne technique a detector-limited linewidth of 10 kHz was measured.
Diverse movements using optical manipulation have been introduced. These are generally performed in the focal region of the laser beam. To achieve a wider range of movements based on precise motion transformation, an effective method for optical manipulation that overcomes the important obstacles such as small optical trapping forces, friction, and the viscosity of fluids is required. A multi-link system with an elastic joint is introduced that provides precise motion transformation and amplification. By considering the physical properties of the structure and the optical trapping force, an elastic micron-scale joint with the simple shape of a thin plate was designed. As a further example of a multi-link system with an elastic joint, a double 4-link system for motion enlargement was designed and fabricated. By performing experimental evaluations of the fabricated structures, it was confirmed that multi-link systems with an elastic joint were effective tools for precise motion transformation through optical manipulation.
A novel imaging spectrometer can individually control spatial and spectral resolution by using zoom lenses as the foreoptics of the system and a focusing lens. By varying the focal length we can use the focusing lens to change the spatial and spectral dimensions; with the foreoptics, however, we can change only the spatial dimension. Therefore the spectral resolution and the spectral range are affected by the zoom ratio of the focusing lens, whereas the spatial resolution and the field of view are affected by the multiplication of the zoom ratios of the foreoptics and the focusing lens. By properly combining two zoom ratios, we can control the spectral resolution with a fixed spatial resolution or the spatial resolution with a fixed spectral resolution. For an imaging spectrometer with this novel zooming function, we used the lens module method and third-order aberration theory to design an initial four-group zoom system with an external entrance pupil for the focusing lens. Furthermore, using the optical design software CODE V, we obtained an optimized zoom lens with a focal-length range of 50 to . Finally, the zoom system with its transmission grating in the Littrow configuration performs satisfactorily as the focusing lens of an imaging spectrometer in the wavelength range 450–900 nm.
1 August 1995 in Japanese Journal of Applied Physics
We report on the four-pass amplifier which has operational reliability for dumping an amplified pulse and produces no hot spot which usually causes optically induced damage in the gain medium. By compensating for the polarization distortion caused by thermal birefringence, we could obtain the gain of 2.5×105 from the amplifier. Without compensating for the polarization distortion, we could not obtain the gain larger than 6×103 because of lasing and generation of a large number of pulses.