Hongfu Shi

Hongfu Shi

Auto-generated profile, based on publicly available information

Hongfu Shi

School of Information Science and Technology, Southwest Jiaotong University, Chengdu, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 March 2023 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
HSHongfu Shi
Hongfu Shi
ZKZhihao Ke
Zhihao Ke
Jun ZhengJun Zheng
Jun Zheng
YXYuqing Xiang
Yuqing Xiang
KRKehong Ren
Kehong Ren
Zigang DengZigang Deng
Zigang Deng
The levitation-propulsion integration ability of radial permanent magnet electrodynamic wheel (PM EDW) renders its competitive edge over other magnetic levitation systems. A low-cost and effective second induction method is proposed to target the synchronous improvement of the saturation speed, levitation and propulsion forces. Its effectiveness is determined from the small-scale EDW to the full-scale EDW via theoretical model, simulation analysis and experiments test. First, according to magnetic charge theory, an updated EDW is proposed and developed. Simulated and tested results of the small-scale EDW demonstrate that the levitation force, propulsion force and saturation speed are increased by 14%, 7% and 30%. This improvement benefits the increased induction current and the mitigated skin effect. Afterwards, further analysis of the full-scale EDW with rings of various conductivity and thickness is conducted. The levitation force, propulsion force and saturation speed are enhanced by more than 50%, 10% and 200% synchronously. Based on analysis of power loss under the same levitation and propulsion forces, the updated EDW is more efficient than the original EDW. Ultimately, a proof-of-principle prototype with the updated EDW and 4-m long guideway are developed. The multi-loop PID control strategy along with dynamic mode implementation methodology are introduced. The scaled prototype is levitated over guideway at 12 mm and the levitation-propulsion ability is implemented with the maximum acceleration of 1.25 m/s 2 . This proof-of-principle prototype with updated EDW and control strategy paves the way to engineering applications of Maglev car.

29 May 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
Zigang DengZigang Deng
Zigang Deng
HSHongfu Shi
Hongfu Shi
ZKZhihao Ke
Zhihao Ke
JLJunzhi Liu
Junzhi Liu
ZLZhengyan Li
Zhengyan Li
YLYong Liu
Yong Liu
In this paper, a permanent magnet electrodynamic suspension (PMEDS) system integrated with a car has been developed by our group, along with a 100-m-long test track made of copper. The entire vehicle weighs 2.8 ton and is freely suspended in air over 35 mm without a lateral constraint on guideway. The car uses its own wheels and engine to provide a take-off speed for the PMEDS system, eliminating the excessive costs of the motor, with a maximum speed of 70 km/h. Firstly, a new topology structure equipped with the damping magnets is presented. Afterward, the onboard magnets and guideway are designed via the simulation method verified by the high-speed rotary experiment platform with a diameter of 2500 mm, clarifying the mapping between the electromagnetic forces and structure parameters. The suspension frame and gap adjustment mechanism are developed, and a complete test system is built to monitor the levitation gap, accelerations and deflection angle. Lastly, the integrated PMEDS system is implemented and tested. In-house experiment and line test results not only reveal that the PMEDS has a significant weak guidance capability, but also confirm the effectiveness of the proposed damping magnets. Through the damping magnets, the maximum lateral deflection is limited to less than 11°. The tested levitation-drag-ratio is in general agreement with the simulation results. The great suspension capacity of the PMEDS system can be visually demonstrated. This paper conducts the free suspension test of the PMEDS system for the first time in China, which can open up prospects for further engineering applications.

21 November 2022 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
HSHongfu Shi
Hongfu Shi
ZDZigang Deng
Zigang Deng
BZBaojian Zhang
Baojian Zhang
ZKZhihao Ke
Zhihao Ke
Peng PangPeng Pang
Peng Pang
Jun ZhengJun Zheng
Jun Zheng
The permanent magnet electrodynamic wheel system is a competitive alternative for the implementation of maglev car due to its levitation-propulsion integration ability. However, the temperature rise of conductive plate may deteriorate operation performance even result in suspension failure, which underlines the importance of thermal analysis. In this article, the thermal-force coupling analysis is conducted by experiment combined with the co-simulation method. Firstly, the heat resource generated by power loss in the conductive plate is obtained and verified by analytical model, simulation and experiment, and the lumped thermal model is presented. Additionally, a knowledge of the transient temperature distribution and the variation of electromagnetic forces under different speeds are studied. Eventually, a proof-of-concept prototype of maglev car with its auxiliaries was manufactured and used for further thermal analysis. Temperature management is considered by increasing the volume of conductive plate and cooling the conductive plate via water medium, and a good heat dissipation effect is realized. The results reveal that the levitation forces have a pronounced attenuation because of the temperature, with percentage of 38.8% and 37.4% respectively with respect to the initial room temperature. In low-speed region, the propulsion forces yield a subtle increase while it decreases slightly in high-speed region. Lowering the temperature can be accomplished by increasing conductive plate volume or adopting water cooling. This paper lays a temperature-related co-simulation method and experiment basis, and pave the way for considering the thermal effect in the practical application.

24 February 2022 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
HZHanlin Zhu
Hanlin Zhu
HHHuan Huang
Huan Huang
Jun ZhengJun Zheng
Jun Zheng
HSHongfu Shi
Hongfu Shi
YXYuqing Xiang
Yuqing Xiang
KLKaiwen Li
Kaiwen Li
Inspired by the superconducting electrodynamic suspension (EDS) system in Japan, a new permanent magnet (PM) EDS system combining PM and 8-shaped null-flux coils has emerged in recent years. In general, the structure of a single PM was used as the onboard magnet. This single magnet structure is difficult to further optimize the core magnetic field resource of the EDS system. Facing this issue, we proposed a PM EDS system combining a Halbach PM array (HPMA) with good magnetic collecting capability and the 8-shaped null-flux coils. Furthermore, we established a numerical model for this new HPMA EDS system. The core of the calculation method is to discretize each PM in the HPMA into a coil group. By calculating the mutual inductance between the equivalent coil groups and the null-flux coils, the interaction electromagnetic force is obtained. In order to verify the correctness of our numerical model, the calculation results of the finite-element method (FEM) simulation model are compared with those of the numerical model. The results of two models are basically consistent. It shows that the numerical calculation model has high accuracy. On this basis, the effects of various parameters on three main electromagnetic forces are studied to better explore the application characteristics of the HPMA EDS system. To sum up, this established numerical model can effectively avoid the calculation error caused by the edge effect of the discontinuous magnet array. It provides an accurate calculation method for the optimization of the EDS system combining the PM array and the null-flux coils.

11 September 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
HSHongfu Shi
Hongfu Shi
TCTing Cao
Ting Cao
HYHuiyang Yi
Huiyang Yi
XZXucheng Zhou
Xucheng Zhou
SJSiqi Jiang
Siqi Jiang
Zigang DengZigang Deng
Zigang Deng
The self-stabilization and absence of the drag force in high-temperature superconducting system (HTS) render its competitive edge over others, and the successful development of the first high-speed engineering prototype validates its potential. However, addressing the braking challenge has become a significant concern. In this work, a split-guideway permanent magnet eddy current brake (PMECB) with enhanced brake ability is proposed. Analytical models that consider the induced current in the truncation section and source magnetic field are developed and verified. A novel periodical simulation method is proposed to simulate an infinite guideway with finite solid model. Additionally, dependence of the number, size, and position of slit on the brake force is investigated, and the guidelines are presented, and a case design is performed. The superiority of split guideway is demonstrated in terms of brake distance and lateral oscillation frequency. Finally, through the high-speed test rig, the simulation and analytical models are verified, and the effectiveness of the split-guideway PMECB is confirmed. The evolutions of the electromagnetic forces throughout the continuous test are examined. The influences of transverse and vertical disturbances on PMECB are experimentally investigated.

27 October 2023 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
HLHao Lu
Hao Lu
Zigang DengZigang Deng
Zigang Deng
CLChong Lv
Chong Lv
HSHongfu Shi
Hongfu Shi
HZHanlin Zhu
Hanlin Zhu
XWXuejie Wu
Xuejie Wu
The permanent magnet electrodynamic wheel (PMEDW) system is a competitive alternative for achieving linear propulsion due to its integrated propulsion-guidance capability. In this article, an integrated propulsion-guidance system comprising a conductive plate and a PMEDW is developed and investigated for implementation in a high-temperature superconducting (HTS) maglev prototype. First, an analytical model combined with a simulation model is established and verified through experimental results. Furthermore, the impact of conductive plate thickness and working air gap on propulsion performance is analyzed. The correlation between the PMEDW system and the permanent magnet guideway (PMG) is also explored. Moreover, the characteristics of the completed propulsion-guidance HTS system are studied, including propulsion ability and guidance performance. Finally, a small-scale experimental prototype with an auxiliary PMEDW is developed, and dynamic experiments are carried out. The outcomes demonstrate that the proposed propulsion system can sufficiently drive the HTS maglev module and enhance the guidance capability. The findings can serve as a reference for subsequent applications of the HTS maglev train traction system.