The permanent magnet electrodynamic wheel system is a competitive alternative for the implementation of maglev car due to its levitation-propulsion integration ability. However, the temperature rise of conductive plate may deteriorate operation performance even result in suspension failure, which underlines the importance of thermal analysis. In this article, the thermal-force coupling analysis is conducted by experiment combined with the co-simulation method. Firstly, the heat resource generated by power loss in the conductive plate is obtained and verified by analytical model, simulation and experiment, and the lumped thermal model is presented. Additionally, a knowledge of the transient temperature distribution and the variation of electromagnetic forces under different speeds are studied. Eventually, a proof-of-concept prototype of maglev car with its auxiliaries was manufactured and used for further thermal analysis. Temperature management is considered by increasing the volume of conductive plate and cooling the conductive plate via water medium, and a good heat dissipation effect is realized. The results reveal that the levitation forces have a pronounced attenuation because of the temperature, with percentage of 38.8% and 37.4% respectively with respect to the initial room temperature. In low-speed region, the propulsion forces yield a subtle increase while it decreases slightly in high-speed region. Lowering the temperature can be accomplished by increasing conductive plate volume or adopting water cooling. This paper lays a temperature-related co-simulation method and experiment basis, and pave the way for considering the thermal effect in the practical application.
27 October 2023 in IEEE Transactions on Applied Superconductivity
The permanent magnet electrodynamic wheel (PMEDW) system is a competitive alternative for achieving linear propulsion due to its integrated propulsion-guidance capability. In this article, an integrated propulsion-guidance system comprising a conductive plate and a PMEDW is developed and investigated for implementation in a high-temperature superconducting (HTS) maglev prototype. First, an analytical model combined with a simulation model is established and verified through experimental results. Furthermore, the impact of conductive plate thickness and working air gap on propulsion performance is analyzed. The correlation between the PMEDW system and the permanent magnet guideway (PMG) is also explored. Moreover, the characteristics of the completed propulsion-guidance HTS system are studied, including propulsion ability and guidance performance. Finally, a small-scale experimental prototype with an auxiliary PMEDW is developed, and dynamic experiments are carried out. The outcomes demonstrate that the proposed propulsion system can sufficiently drive the HTS maglev module and enhance the guidance capability. The findings can serve as a reference for subsequent applications of the HTS maglev train traction system.
16 June 2025 in IEEE Transactions on Instrumentation and Measurement
Superconducting coil (SCC) quenching is a key concern in the field of superconductivity. Due to the uncertainty of their overload and low temperature system, the characteristics of superconducting electrodynamic suspension (SCEDS) under quenching conditions is still concerned. Moreover, the effect under cooperative induction of propulsion and damping systems is considered. In this regard, the electromagnetic and dynamic characteristics of SCEDS bogie are analyzed according to the phenomenon of on-board SCC quenching. Firstly, a numerical calculation model based on electromechanical coupling including the whole electromagnetic system is developed for SCEDS. The electromagnetic force measured by SCEDS in Japan is compared to verify the accuracy of the mathematical model. Secondly, an equivalent experimental platform is built to measure the magnetic flux of null flux coil (NFC) in SCC quenching process. Thirdly, the electromagnetic and force characteristics of the system during SCC quenching are explored. Subsequently, the 5-DOF dynamic response of the bogie after SCC quenching is investigated and shows a trend of divergence. Finally, damping suppression and protection strategy to avoid SCC quenching instability is summarized. The analysis results can provide a reference for the emergency protection of SCEDS.
16 June 2025 in IEEE Transactions on Energy Conversion
The complete permanent magnet null-flux electrodynamic suspension system (PMEDS) comprises the levitation-guidance (LG) and the propulsion subsystem, both of which are of great significance for the research on integrated system coupling mechanisms. Existing studies often separate subsystems for analysis, neglecting coupling relationships in the electromagnetic and dynamic aspects. As a solution, this work develops a propulsion-suspension-guidance coupling analytical model to investigate the coupled electromagnetic and dynamic characteristics of the system. In this paper, the same technical approach was adopted to achieve electromagnetic coupling in the LG system and the propulsion system. Afterward, an electromagnetic-dynamics computational model was developed through Matlab/Simulink software by integrating the dynamics equations. Finally, the analysis of electromagnetic and dynamic characteristics revealed the distinct influences of the propulsion system on the coupled system across various operating conditions, validating the need of establishing the coupled system.
1 April 2026 in IEEE/ASME Transactions on Mechatronics
The electrodynamic suspension (EDS) is one of the representatives of the maglev system, which is expected to realize high-speed transportation. In this article, an electromagnetic model of a Halbach permanent magnet array (HPMA) and null-flux-coil (NFC) is established based on a permanent magnet EDS (PMEDS) system. First, the electromagnetic analysis model of the PMEDS system is established by the Biot–Savart Law and the dynamic loop theorem. Subsequently, the comprehensive sensitivity analysis of the electromagnetic parameters of the PMEDS is carried out, and the influence factors of different variables are obtained. The optimization objectives are determined by the levitation drag ratio, levitation mass ratio, average levitation force, and levitation force ripple. Furthermore, the optimization is carried out based on NSGA-II. Then, finite element analysis is used to verify the effectiveness of the optimization results. Next, the rationality of the optimization method is verified by a static experiment. Moreover, the reliability of the optimization results is confirmed through dynamic performance analysis. Finally, the optimal pole pitch ratio of HPMA-NFC is proposed to achieve a lower electromagnetic force ripple. Results show that the optimized parameters enhance the performance of PMEDS within the controllable cost range and provide guidance for engineering applications.
Maglev systems represent a cutting-edge high-speed transport technology, and turnout switches play a critical role in the creation of a highly branched network. There are two common types of turnouts for high-temperature superconducting (HTS) Maglev systems: mechanical and electromagnetic. Due to the many advantages, an electromagnetic turnout is a better choice for a Maglev system than a mechanical one. However, there is a difference in the distribution of the magnetic field over the turnout area and the permanent magnetic track, which cannot meet the safety requirements of the Maglev system. This article proposes a modernized design of an electromagnetic switch based on previously proposed optimization solutions by placing a diamagnetic screen between two electromagnetic poles of an electromagnet, thereby reducing the scattering fluxes between them. The method of diamagnetic screening and experimental methodology are described in this article. The experiment was carried out using a three-dimensional magnetic field scanner to provide results on the distribution of the magnetic field and the increase in the magnetic induction value over the electromagnet poles. Thus, this article provides valuable suggestions for improving the design of the electromagnetic turnout of HTS Maglev systems. Moreover, the proposed method can be applied to any magnetic device or electric machine with an open magnetic circuit.