Heterogeneous integration of nanomaterials has enabled advanced electronics and photonics applications. However, similar progress has been challenging for thermal applications, in part due to shorter wavelengths of heat carriers (phonons) compared to electrons and photons. Here, we demonstrate unusually high thermal isolation across ultrathin heterostructures, achieved by layering atomically thin two-dimensional (2D) materials. We realize artificial stacks of monolayer graphene, MoS2, and WSe2 with thermal resistance greater than 100 times thicker SiO2 and effective thermal conductivity lower than air at room temperature. Using Raman thermometry, we simultaneously identify the thermal resistance between any 2D monolayers in the stack. Ultrahigh thermal isolation is achieved through the mismatch in mass density and phonon density of states between the 2D layers. These thermal metamaterials are an example in the emerging field of phononics and could find applications where ultrathin thermal insulation is desired, in thermal energy harvesting, or for routing heat in ultracompact geometries.
20 October 2017 in ACS Applied Materials & Interfaces
We report considerable improvement in the hysteresis and reliability of single-layer MoS2 field-effect transistors (FETs) achieved by chemical vapor deposition (CVD) of MoS2 and dielectric encapsulation. Our results show that a high-quality 15-nm thick Al2O3 layer allows for an efficient protection of the devices from adsorbent-type trapping sites. Combined use of the CVD-grown MoS2 as a channel and encapsulation simultaneously leads to at least an order of magnitude smaller hysteresis and up to two orders of magnitude lower long-term drifts of the transistor characteristics. Together with high on/off current ratios (~109) achieved in our devices, this presents a considerable advance in the technology of MoS2 FETs. As such, we conclude that both CVD growth of MoS2 and encapsulation present important technological steps toward reaching commercial quality standards of next-generation two-dimensional (2D) material technologies.