Laboratorio de Investigación en Funcionalidad y Tecnología de Alimentos, Departamento de Ciencia y Tecnología, Universidad Nacional de Quilmes, Buenos Aires B1876BXD, Argentina
Auto-generated profile, based on publicly available information
Jorge Ricardo Wagner
Laboratorio de Investigación en Funcionalidad y Tecnología de Alimentos, Departamento de Ciencia y Tecnología, Universidad Nacional de Quilmes, Buenos Aires B1876BXD, Argentina
The aim of this work was to study the effect of xanthan gum (XG) on the gelation process of bovine sodium caseinate (NaCAS) induced by acidification with glucono-δ-lactone (GDL) and on the mixed acid gel microstructure. Before GDL addition, segregative phase separation was observed in all the NaCAS-XG mixtures evaluated. The gelation process was analyzed by using a fractional factorial experimental design. The images of the microstructure of the mixed acid gels were obtained by conventional optical microscopy and the mean diameter of the interstices was determined. Both the elastic character and the microstructure of the gels depended on the concentrations of XG added. As XG concentration increased, the kinetics of the gelation process was modified and the degree of compactness and elasticity component of the gel network increased. The microstructure of gels depends on the balance among thermodynamic incompatibility, protein gelation and NaCAS-XG interactions.
Soybean seeds (Glycine max) were dried under real scale conditions to different final moisture content (m.c.) (9.1, 9.7, 10.9 %, and control with 16.2 %) and processed through extruding-expelling. Results indicated that soybean seed m.c. affected the composition of the soybean expeller and, thus, the oil extraction efficiency (OEE), which increased as the seed m.c. decreased. A polynomic model was proposed for predicting OEE as a function of soybean m.c., indicating that drying soybean to 10 % resulted in an OEE of approximately 65 %. A thin layer drying experiment of soybean seeds indicated that the protein dispersibility index (PDI) was not affected as regards drying air temperatures up to approximately 69 °C, and a bi-linear model with a non-pre-established break point was fitted. The real scale drying treatment in a rack type dryer (mixed flow) did not show any effect (p > 0.05) on the PDI at 80 °C, while at 115 °C a reduction (p < 0.05) was observed (PDI reduction was 0.8 and 2.1 percentage points, respectively).
29 March 2019 in Food Technology and Biotechnology
The preservation of mould-ripened salami was investigated during 48 days at 19-20 °C under different packaging conditions: (i) high barrier film filled with air, 100 % N2 or under vacuum, (ii) biaxially oriented polypropylene film, (iii) microperforated polyethylene film and (iv) unpackaged. Sensory, texture profile, physicochemical and microbiological analyses were performed. Fungal quantification revealed two data groups. In group 1 (consisting of salami in microperforated polyethylene film, biaxially oriented polypropylene film and unpackaged) the conidium viability was relatively constant. In group 2 (salami preserved in high barrier film filled with air, 100 % N2 or under vacuum) the conidium viability decreased due to the absence of oxygen and the high carbon dioxide volume fraction. SEM micrographs showed micromorphological changes in fungal structure; microperforated polyethylene film, biaxially oriented polypropylene film and unpackaged conditions preserved the conidial morphology, while high barrier film filled with air, 100 % N2 or vacuum conditions collapsed the hyphae and most of the conidia. Salami packed in microperforated polyethylene film and biaxially oriented polypropylene film showed the most acceptable organoleptic characteristics and lower hardness and chewiness values after packaging.