17 November 2023 in IEEE Transactions on Electron Devices
This article presents a wafer-level vacuum-packaged vertical resonant electric field microsensor (EFM), which uses an anodic bonded glass in silicon, silicon on insulator, and glass on silicon (GIS–SOI–GOS) triple-stack structure. GIS is innovatively employed to fabricate the external driving electrode, which is used to vertically drive the resonator at the device layer of SOI. SOI is used to fabricate the sensing structure. GOS is used to establish the electric field induction channel. A theoretical model is established to characterize the output characteristics of the novel EFM. Numerical simulations are conducted to optimize the key structural parameters. The fabrication process based on bulk micromachining is employed to manufacture the microsensor. The developed EFM is characterized experimentally. The experimental results show that the air pressure in the vacuum chamber is about 5 Pa, and a driving voltage of 7 V dc and 0.07 V $_{\text{p}}$ ac is needed to realize the vertical resonance of the sensing structure. The microsensor demonstrates a sensitivity of 0.31 mV/(kV/m) with a linearity of 5.84% within the electric field range of 0–50 kV/m, which further improves the sensitivity of the wafer-level vacuum-packaged EFM.
3 July 2023 in IEEE Transactions on Electron Devices
This article proposes a single-chip 3-D electric field microsensor (3-D EFM) with piezoelectric excitation to reduce the excitation voltage and crosstalk noise and improve the performance of the microsensor. The microsensor is composed of one group of shielding electrodes and four sets of symmetrically distributed sensing electrodes. The shielding electrodes vibrate vertically with piezoelectric excitation, and currents can be induced in the four sets of sensing electrodes under the external electric field. The signals related to the electric field components along the $\textit{x}$ , $\textit{y}$ , and $\textit{z}$ three coordinate axes can be calculated through the periodic induced currents. A theoretical model for the microsensor is set up. The finite-element simulation is conducted to verify the working principle and optimize the key structural parameters. The fabrication process is designed and successfully realized. Experiments are conducted on the single-chip 3-D EFM, and the results show that under 2-V ac driving voltage; the output sensitivity is 0.2315 mV/kV/m for the $\textit{x}$ -axis, 0.3727 mV/kV/m for the $\textit{y}$ -axis, and 2.187 mV/kV/m for the $\textit{z}$ -axis. The linearity errors of the three coordinate axes are within 2.77% in the range of 0–50 kV/m. The maximum measurement error of the 3-D EFM is less than 8%.