The measured vibrational responses of the pumping station pipeline in the irrigation site were chosen to confirm the chaotic characteristics of the pumping station pipeline vibration and to determine the vibrational excitation that makes it chaotic. First, the chaotic properties of the pipeline vibration responses were investigated using a saturation correlation dimension and the maximum Lyapunov exponent. The vibration excitation with chaotic features was obtained using an improved variational mode decomposition (IVMD) method to examine the multi-time-scale chaotic characteristics of the pipeline vibration responses. The results show that the vibrational responses of each measuring point of the pipeline under different operating conditions have clear chaotic characteristics, where the chaotic characteristics of the axial points and bifurcated pipe points are relatively strong. The vibration of the operating conditions and measurement points affected by the unit’s operation and flow state change is further complicated. The intrinsic mode function (IMF) produces a low-dimensional chaotic attractor after the IVMD disrupts the vibration response. Still, the vibration excitation of the remaining components on behalf of the units does not have chaotic properties, implying that water pulsation excitation makes the pumping station pipeline vibrations chaotic. The vibration excitation caused by the unit’s operation covers the chaotic characteristics of the pipeline vibration and increases its uncertainty. The outcomes of this study provide a theoretical basis for further exploration of the vibration characteristics of pumping station pipelines, and a new method of chaos analysis is proposed.
–Bridge–sluice systems serve road traffic and hydraulic regulation, yet the directional association of traffic–induced vibrations within the bridge deck—sluice pier—embankment system and its implications for –wall–soil interaction remain insufficiently understood. Synchronized field measurements were conducted at the Wucun control sluice using four vehicle types and multiple speeds. Transfer entropy (TE) was used to identify directional information associations rather than amplitude– or energy –transmission ratios, and measured horizontal and vertical velocity histories were converted into phase–consistent displacement inputs for a two–dimensional –wall–soil model. Vibration amplitudes varied non–monotonically with speed, indicating that vehicle mass alone did not govern the response. The crawler excavator generated vertical and horizontal bridge–deck peak–to–peak velocities of 22.549 and 26.334 mm/s, respectively. The dominant information pathway was bridge deck to sluice pier to embankment; the crawler excavator produced the strong–est transfer, with a pier–to–embankment retention coefficient of 0.81. Within the adopted two–dimensional numerical idealization, the backfill was predicted to remain predominantly elastic at the measured vibration level, with response concentrations at side–wall corners and adjacent contact zones, particularly near the upper corner of contact zone B. Local plasticity first emerged at 10 times the measured input and expanded over the 15–25–fold range. These findings support control of high–impact vehicles and targeted monitoring of side–wall—embankment connections where deformation incompatibility and seepage –control risk may concentrate.