11 April 2022 in Acta Materialia
15 January 2025 in Acta Materialia
28 June 2024 in Advanced Engineering Materials
The low toughness and structural stability of nanostructured materials are strongly related to the numerous grain boundaries and interfaces. Among other design stratgies, the use of low‐energy boundaries has turned out to provide the most comprehensive improvement of the property spectrum targeting on ductility, toughness, as well as thermal and microstructural stability upon mechanical loading. Cyclic high‐pressure torsion (CHPT) is one prosperous technique to synthesize low‐angle boundaries (LAGB) at the nanoscale, enabling the production of high‐strength materials. It is presented here with an in‐depth analysis of the structural evolution focusing on the effect of different strain amplitudes and accumulated strains as well as crystal structure to understand how these parameters need to be adjusted to optimize the fraction of LAGBs. Different than expected from classical fatigue testing, the crystal structure seems to play a minor role for the cell structure evolution at comparably large strain amplitudes. It is, therefore, a strong asset that CHPT is feasible to produce nanostructures LAGB boundaries in both FCC and BCC structures. Furthermore, by optimizing the geometry of the anvils, it enables homogenous structural sizes in the entire sample as in contrast to other techniques the strain gradient impact on LAGB formation can be overcome.
2 June 2026 in SSRN Electronic Journal
Grain growth fundamentally shapes the microstructure of crystalline materials upon annealing, affecting their overall mechanical and functional properties. Recently, it has been rationalized that grain growth in polycrystals does not result solely from weighted curvature flow, but elastic effects (intrinsic stress) arising from shear coupling also need to be taken into account. We characterize and examine the effect of free surfaces on grain growth kinetics of high-purity, bulk polycrystalline nickel. By analyzing the microstructural evolution on cross sections of 1 mm thick annealed specimens from the surface to the interior, as well as through in-plane investigations on specimens with varying thickness (1 mm, 40 μm, and 10 μm), an intrinsic grain-size gradient was identified, characterized by a gradual increase in grain size towards the interior. Interestingly, this grading was not restricted to the very surface but continued to depths of five to ten layers of grains, where effects from thermal grooves are considered negligible. We demonstrate that this behavior is significantly affected by elastic relaxation at the free surface, which alters the internal stress fields generated by shear-coupled grain boundary migration. These findings emphasize the relevance of free surfaces to the microstructural evolution of polycrystals.
24 September 2026 in Materials & Design