The Bayesian network (BN) is a powerful model for probabilistic knowledge representation and inference and is increasingly used in the field of reliability evaluation. This paper presents a bibliographic review of BNs that have been proposed for reliability evaluation in the last decades. Studies are classified from the perspective of the objects of reliability evaluation, i.e., hardware, structures, software, and humans. For each classification, the construction and validation of a BN-based reliability model are emphasized. The general procedural steps for BN-based reliability evaluation, including BN structure modeling, BN parameter modeling, BN inference, and model verification and validation, are investigated. Current gaps and challenges in reliability evaluation with BNs are explored, and a few upcoming research directions that are of interest to reliability researchers are identified.
5 August 2019 in IEEE Transactions on Industrial Electronics
In dynamic complex environments, the degradation of structure systems is generally caused not by a single factor but by multiple ones, and the process is subject to a high level of uncertainty. This paper contributes a hybrid physics-model-based and data-driven remaining useful life (RUL) estimation methodology of structure systems considering the influence of multiple causes by using dynamic Bayesian networks (DBNs). The structure model and parameter model of DBNs for the degradation process caused by a single factor are established on the basis of theoretical or empirical physical models, thereby solving the problem of insufficient data. An RUL estimation model is subsequently established by integrating these degradation process models. The RUL value is obtained from the time difference between the detection point and predicted failure point, which is determined using the failure threshold of performance. The sensor data and expert knowledge can be input into the estimation model to update the RUL value whenever necessary. Subsea pipelines in offshore oil and gas subsea production systems are adopted to demonstrate the proposed methodology. The degradation processes with fatigue, corrosion, sand erosion, and internal waves are modeled using DBNs, and the RUL is estimated using DBN-based RUL methodology.
1 January 2011 in International Journal of Refractory Metals and Hard Materials