5 June 2023 in IEEE Electrification Magazine
The exponential increase in Global greenhouse gas (GHG) emissions and the rapid depletion of fossil fuels over the past few decades have swayed the transportation sector toward becoming more electric. In the last decade, with continuous improvements in battery technology and interfacing power electronics, there has been immense progress in the electrification of land-based transport. As their electrification gains pace, the focus is shifting toward greening other forms of transport, such as maritime and aviation sectors, since they contribute substantially to the total carbon footprint. The marine sector has witnessed huge growth in recent years because of the development of international trade, wherein it plays an essential role in the transportation of goods across the globe. The variation in ship sizes, types, and routes—along with their grid-distant nature and water-borne operation—distinguishes them from terrestrial electric vehicles. This gives rise to a multitude of unique challenges on board as well as at the ports that they operate around. Power electronics is one of the key enabling technologies in tackling these challenges and thereby creating safe, reliable, and emission-free maritime transport.
7 May 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The power electronic converter, especially the power semiconductor, is a major contributor to the failure rates of the wind turbine drivetrain. As the temperature is a major driving factor behind the failure mechanisms of these power semiconductors the choice of topology and switching strategy can have a significant effect on the reliability of the converter. This paper presents a detailed comparison of several three level converter topologies and switching strategies on the basis of loss distribution, thermal, and lifetime performance. This investigation is done through simulations on a 10MW direct drive permanent magnet drivetrain. The study shows that over-rating in the form of using overrated topologies, or the use of overrated components can result in large gains in lifetime expectancy and quantifies these gains. It concludes that the improvements offered by overrated topologies and overrated components are comparable and that use of the overrated topologies do not offer a significant advantage over the use of topologies with overrated components.
11 July 2017 in IEEE Transactions on Energy Conversion
The brushless doubly fed induction machine (DFIM), without brushes and slip rings, is regarded as an attractive alternative to the conventional DFIM in terms of reliability. This paper presents a sensorless field-oriented control strategy for the brushless-DFIM, which further increases its attractiveness as a drive system. With the use of a straightforward and alternative time-dynamic brushless-DFIM model, a complete brushless-DFIM based drive is modeled and used for the development of the sensorless control strategy. The developed sensorless control strategy is implemented in an experimental setup. Simulation and measurement results demonstrate that the developed sensorless control strategy can control the brushless-DFIM in a stable and responsive manner over its full operating speed range. In this way, a fully functional sensorless control strategy for the brushless-DFIM is demonstrated for the first time in the literature.
2 November 2018 in IEEE Access
This paper proposes a simplified approach to model the thermal behavior of the insulated gate bipolar transistors (IGBTs) in a subsea power electronic converter. The models are based on empirical relations for natural convection in water, and IGBT datasheet values. The proposed model can be used in the design of subsea converters and in the reliability analysis of their IGBTs. Experimental results are provided to validate the proposed thermal model. Suggestions are made to minimize the net thermal resistance by introducing a high conductivity thermal material as a mounting plate between the IGBT and the cabinet walls. Impact of the mounting plate dimensions, and material properties on the junction temperature of the IGBTs is studied. A case study analysis is made on a 100 kVA converter. Results indicate that the thermal spreading resistances in the mounting plate and the cabinet walls contribute significantly to the overall thermal resistance. Spreading resistances can be mitigated by appropriate design measures. Furthermore, it was observed that the passive cooling in water is not as effective as the forced water cooling. However, the low cost, simple design and higher reliability of passive cooling systems might make them a favorable choice for subsea systems.