7 July 2016 in IEEE Transactions on Magnetics
The brushless doubly fed induction machine (DFIM) shows great potential as a generator in large-scale wind turbines. The motion of the magnetic field in this machine is not a simple rotation, which makes it not so straight forward to understand its operating principles. This paper develops an analytical magnetic field model for the brushless DFIM that includes the effects of rotor time harmonics and space harmonics due to the winding distribution and slotting. Using a case study machine, the developed analytical model is then validated by comparison with finite-element (FE) calculations. In addition, a 2-D spectral analysis is applied to the FE derived radial air-gap magnetic field as a function of time. This analysis verifies the space-time relations of the rotating magnetic field components in the airgap of the brushless DFIM. Finally, the developed analytical magnetic field model is used to analyze the brushless DFIM operating principles. The interaction of the stator magnetic field with the rotor nested loops is explained, as well as the development of electromagnetic torque.
11 July 2017 in IEEE Transactions on Energy Conversion
The brushless doubly fed induction machine (DFIM), without brushes and slip rings, is regarded as an attractive alternative to the conventional DFIM in terms of reliability. This paper presents a sensorless field-oriented control strategy for the brushless-DFIM, which further increases its attractiveness as a drive system. With the use of a straightforward and alternative time-dynamic brushless-DFIM model, a complete brushless-DFIM based drive is modeled and used for the development of the sensorless control strategy. The developed sensorless control strategy is implemented in an experimental setup. Simulation and measurement results demonstrate that the developed sensorless control strategy can control the brushless-DFIM in a stable and responsive manner over its full operating speed range. In this way, a fully functional sensorless control strategy for the brushless-DFIM is demonstrated for the first time in the literature.
29 September 2016 in IEEE Transactions on Magnetics
The brushless doubly fed induction machine (DFIM) is a special machine type that is of interest as a generator in wind turbine drive trains. The brushless DFIM has a significant space-harmonic content compared with conventional machine types, due to its construction. This results in additional harmonic distortions, such as torque-ripple and time harmonics. This paper studies the causes and origins of harmonic distortions in the brushless DFIM. Using time- and space-harmonic analysis, an analytical evaluation method is derived to predict the torque ripple frequencies and time-harmonic frequencies in stator and rotor voltages and currents. The evaluation method is applied to a prototype brushless DFIM to demonstrate the severity of harmonic related distortions that can be present in the brushless DFIMs. The evaluation is validated by additional finite-element analysis and measurements. Furthermore, measures are proposed to reduce harmonic distortions. The insight into harmonic distortions in the brushless DFIM and the ability to predict and prevent them must lead to the improved brushless DFIM designs in the future.
1 March 2017 in IET Electric Power Applications
Brushless doubly‐fed induction machines (DFIMs) have great potential as variable‐speed generators in wind turbines. Undesired space‐harmonics exist because the special rotor needs to couple to two stator windings with different pole‐pair numbers and different frequencies. These undesired space‐harmonics could lead to noise, vibrations and low power quality. Applying skewed slots can overcome the above drawbacks. Previously, a two‐dimensional (2D) multi‐slice finite element (FE) method was applied to study the effects of skew which was time consuming. In the stage of initial design, it is not efficient to use such a model to predict how much the average torque and the torque ripple would be reduced by skewing slots. This study makes use of normal 2D FE results and applies skew factors in post‐processing to investigate the influence of rotor skew. It also proves that to apply skew factors appropriately, not only the space‐harmonic order needs to be considered, but also the time‐harmonic order. The proposed method can give an approximate prediction of skew effects with limited computing time. The results also indicate that skewing the rotor slot over one stator slot pitch could be a good choice to minimise the torque ripple in a brushless DFIM with a nested‐loop rotor.