A printed circuit board (PCB) integrated inductor with an additively electrodeposited polypyrrole-laminated nickel-iron (NiFe) core is presented for MHz dc–dc power conversion. The PCB-integrated inductor has a racetrack-shaped winding, which is formed using a standard PCB manufacturing process. Subsequently, multilayers of NiFe and polypyrrole are electrodeposited to wrap a laminated core around the PCB racetrack winding. A 515 nH PCB-integrated inductor is fabricated. The fabricated inductor shows a dc resistance of 290 mΩ and a peak quality factor of 9.6 at 2.1 MHz. The inductor is tested in a 4 MHz buck converter and achieves an inductor efficiency higher than 85.0% over a wide range of output currents (0.15–0.4 A).
In this letter, a fan-out-package-embedded power inductor technology is proposed. The inductor is embedded in a silicon-based fan-out package and surrounds the packaged die in which a voltage converter IC can be put. To demonstrate the integrated power inductor technology, a 2.4-nH air-core inductor for integrated voltage regulator applications is fabricated. The fabricated inductor shows a dc resistance of 5.0 mΩ and quality factors of 43–67 in the frequency range of 100–500 MHz. The small dc resistance and high quality factors make this integrated inductor technology promising for integrated power conversion.
Modern wireless systems demand compact, power-efficient radio frequency (RF) front-end components that support wideband tunability and nonreciprocity. We present a class of miniature bandpass filter that achieves both continuously tunable frequency operation (4.0–17.7 GHz) and high nonreciprocity ( > 25 dB), all within a compact size of 1.07 cm³. The filter employs a microfabricated 18 µm thick Yttrium Iron Garnet (YIG) waveguide with meander-line aluminum transducers, enabling low-loss unidirectional propagation via magnetostatic surface waves. Leveraging a benzocyclobutene planarization fabrication process, this study enables a dispersion profile unique to thick YIG films, resulting in enhanced filter skirt performance with minimal spurious modes. Frequency tuning is enabled by a zero-static-power magnetic bias circuit using transient current pulses, eliminating continuous power consumption. The filter demonstrates low insertion loss (3–5 dB), high out-of-band rejection ( > 30 dB), narrow bandwidth (100–200 MHz), robust power handling ( > 10.4 dBm), and high linearity (IIP3 > 26 dBm).
Quasistatic magnetic fields can be used to modulate the magnetic and electrical properties of many magnetic materials, thereby enabling the operation of various magnetic devices such as multiferroic magnetic field sensors and ferro-/ferrimagnetic magnetostatic wave filters. We present a magnetic circuit designed to produce a tunable DC magnetic bias field and detail its operating principle. The magnitude of the bias field can be electrically tuned to achieve a desired magnetic field; when not being switched, the achieved field is maintained with zero static power consumption. The magnetic circuit comprises two distinct types of permanent magnets: a NdFeB magnet with relatively high coercivity; and an AlNiCo V magnet with relatively low coercivity combined with a tuning coil for adjusting its magnetization. Soft magnetic yoke pieces link the permanent magnets and also define an air gap. Pulses of current through the coil will adjust the remanence of the AlNiCo magnet, thereby changing the flux and field in the air gap. A magnetic bias circuit with a compact volume of 0.27 cm3 has been constructed, providing an adjustable DC magnetic field with a tuning range of 3.7 to 288.5 mT within a 1 mm air gap.
21 March 2022 in IEEE Transactions on Components, Packaging and Manufacturing Technology
In this letter, a novel conformal thick oxide technology is proposed and demonstrated for on-chip high-voltage isolation. The proposed technology utilizes alternate deposition and oxidation of polysilicon to form thick high-quality conformal oxide with a reasonable process time. Experimental results show that breakdown voltages (BVs) as high as 4.19 kV can be achieved with double-side, 6- $\mu \text{m}$ -thick planar oxide layers formed using this technology. Excellent conformity was also observed inside deep silicon trenches. The double-side, silicon-embedded transformer (DSSET) fabricated using this isolation layer technology achieved an isolation capability of 1.84 kV.