Alejandro Morales-Cantero

Alejandro Morales-Cantero

Auto-generated profile, based on publicly available information

Alejandro Morales-Cantero

Departamento de Química Inorgánica, Cristalografía y Mineralogía, Universidad de Málaga, 29071 Málaga, Spain

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
ACANA CUESTA
ANA CUESTA
AMAlejandro Morales-Cantero
Alejandro Morales-Cantero
ATAngeles G De la Torre
Angeles G De la Torre
Miguel A. G. ArandaMiguel A. G. Aranda
Miguel A. G. Aranda
Reducing cement CO2 footprint is a societal need. This is being achieved mainly by replacing an increasing amount of Portland clinker by supplementary cementitious materials. However, this comes at a price: lower mechanical strengths at early ages due to slow pozzolanic reaction(s). This is being addressed by using accelerator admixtures. In this context, calcium silicate hydrate nucleation seeding seems to have a promising future, as it can accelerate cement and pozzolanic reactions at early ages, optimising their microstructures, without compromising late strength and durability performances. In fact, these features could even be improved. Moreover, other uses are low temperature concreting, precasting, shotconcrete, etc. Here, we focus on reviewing recent reports on calcium silicate hydrate seeding using commercially available admixtures. Current knowledge on the consequences of nucleation seeding on hydration reactions and on early and late mechanical strengths is discussed. It is noted that other features, in addition to the classic alite hydration acceleration, are covered here including the enhanced ettringite precipitation and the very efficient porosity refinement, which take place in the seeded binders. Finally, because the seeded binders seem to be denser, durability properties could also be enhanced although this remains to be properly established.

8 May 2023 in Nature Communications
Verified
Journal Article
Open access
PDF file
SSShiva Shirani
Shiva Shirani
ACAna Cuesta
Ana Cuesta
AMAlejandro Morales-Cantero
Alejandro Morales-Cantero
ISIsabel Santacruz
Isabel Santacruz
ADAna Diaz
Ana Diaz
Miguel A. G. ArandaMiguel A. G. Aranda
Miguel A. G. Aranda
Despite a century of research, our understanding of cement dissolution and precipitation processes at early ages is very limited. This is due to the lack of methods that can image these processes with enough spatial resolution, contrast and field of view. Here, we adapt near-field ptychographic nanotomography to in situ visualise the hydration of commercial Portland cement in a record-thick capillary. At 19 h, porous C-S-H gel shell, thickness of 500 nm, covers every alite grain enclosing a water gap. The spatial dissolution rate of small alite grains in the acceleration period, ∼100 nm/h, is approximately four times faster than that of large alite grains in the deceleration stage, ∼25 nm/h. Etch-pit development has also been mapped out. This work is complemented by laboratory and synchrotron microtomographies, allowing to measure the particle size distributions with time. 4D nanoimaging will allow mechanistically study dissolution-precipitation processes including the roles of accelerators and superplasticizers.

16 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
AMAlejandro Morales-Cantero
Alejandro Morales-Cantero
ACANA CUESTA
ANA CUESTA
ATAngeles G De la Torre
Angeles G De la Torre
OMOliver Mazanec
Oliver Mazanec
PBPere Borralleras
Pere Borralleras
Miguel A. G. ArandaMiguel A. G. Aranda
Miguel A. G. Aranda
The acceleration of very early age cement hydration by C-S-H seeding is getting attention from scholars and field applications because the enhanced early age features do not compromise later age performances. This acceleration could be beneficial for several low-CO2 cements as a general drawback is usually the low very early age mechanical strengths. However, the mechanistic understanding of this acceleration in commercial cements is not complete. Reported here is a contribution to this understanding from the study of the effects of C-S-H gel seeding in one Portland cement and two belite cements at two widely studied water–cement ratios, 0.50 and 0.40. Two commercially available C-S-H nano-seed-based admixtures, i.e., Master X-Seed 130 and Master X-Seed STE-53, were investigated. A multi-technique approach was adopted by employing calorimetry, thermal analysis, powder diffraction (data analysed by the Rietveld method), mercury intrusion porosimetry, and mechanical strength determination. For instance, the compressive strength at 1 day for the PC (w/c = 0.50) sample increased from 15 MPa for the unseeded mortar to 24 and 22 MPs for the mortars seeded with the XS130 and STE53, respectively. The evolution of the amorphous contents was determined by adding an internal standard before recording the powder patterns. In summary, alite and belite phase hydrations, from the crystalline phase content evolutions, are not significantly accelerated by C-S-H seedings at the studied ages of 1 and 28 d for these cements. Conversely, the hydration rates of tetracalcium alumino-ferrate and tricalcium aluminate were significantly enhanced. It is noted that the degrees of reaction of C4AF for the PC paste (w/c = 0.40) were 10, 30, and 40% at 1, 7, and 28 days. After C-S-H seeding, the values increased to 20, 45, and 60%, respectively. This resulted in larger ettringite contents at very early ages but not at 28 days. At 28 days of hydration, larger amounts of carbonate-containing AFm-type phases were determined. Finally, and importantly, the admixtures yielded larger amounts of amorphous components in the pastes at later hydration ages. This is justified, in part, by the higher content of amorphous iron siliceous hydrogarnet from the enhanced C4AF reactivity.

14 November 2023 in Cement and Concrete Research
Verified
Journal Article
Open access
SSShiva Shirani
Shiva Shirani
ACANA CUESTA
ANA CUESTA
ATAngeles G De la Torre
Angeles G De la Torre
ISI. Santacruz
I. Santacruz
AMA. Morales-Cantero
A. Morales-Cantero
Miguel A. G. ArandaMiguel A. G. Aranda
Miguel A. G. Aranda

26 August 2021 in Materials
Verified
Journal Article
Open access
PDF file
RPRaquel Pérez-Bravo
Raquel Pérez-Bravo
AMAlejandro Morales-Cantero
Alejandro Morales-Cantero
Margherita BruscoliniMargherita Bruscolini
Margherita Bruscolini
Miguel A. G. ArandaMiguel A. G. Aranda
Miguel A. G. Aranda
ISIsabel Santacruz
Isabel Santacruz
ATAngeles G De la Torre
Angeles G De la Torre
The effect of superplasticiser, borax and the water-to-cement ratio on BYF hydration and mechanical strengths has been studied. Two laboratory-scale BYF cements—st-BYF (with β-C2S and orthorhombic C4A3S¯) and borax-activated B-BYF (with α’H-C2S and pseudo-cubic C4A3S¯)—have been used, and both show similar particle size distribution. The addition of superplasticiser and externally added borax to BYF pastes has been optimised through rheological measurements. Optimised superplasticiser contents (0.3, 0.4 and 0.1 wt % for st-BYF, B-BYF and st-BYF with externally added 0.25 wt % B2O3, respectively) result in low viscosities yielding homogeneous mortars. The calorimetric study revealed that st-BYF is more reactive than B-BYF, as the values of heat released are 300–370 J/g and 190–210 J/g, respectively, after 7 days of hydration; this fact is independent of the water-to-cement ratio. These findings agree with the higher degree of hydration at 28 days of β-C2S in st-BYF (from 45 to 60%) than α’H-C2S in B-BYF (~20 to 30%). The phase assemblage evolution has been determined by LXRPD coupled with the Rietveld method and MAS-NMR. The formation of stratlingite is favoured by increasing the w/c ratio in both systems. Finally, the optimisation of fresh BYF pastes jointly with the reduction of water-to-cement ratio to 0.40 have allowed the achieving of mortars with compressive strengths over 40 MPa at 7 days in all systems. Moreover, the st-BYF mortar, where borax was externally added, achieved more than 70 MPa after 28 days. The main conclusion of this work does not support Lafarge’s approach of adding boron/borax to the raw meal of BYF cements. This procedure stabilises the alpha belite polymorph, but its reactivity, in these systems, is lower and the associated mechanical strengths poorer.

2 April 2025 in Cement and Concrete Composites
Verified
Journal Article
Open access
DVDiego Vallina
Diego Vallina
MRMaría Dolores Rodríguez-Ruiz
María Dolores Rodríguez-Ruiz
AMAlejandro Morales-Cantero
Alejandro Morales-Cantero
ACAna Cuesta
Ana Cuesta
ISIsabel Santacruz
Isabel Santacruz
ATAngeles G De la Torre
Angeles G De la Torre