2 July 2025 in IEEE Transactions on Instrumentation and Measurement
Aircraft tooling positioners are crucial for the precise assembly of key load-bearing components, such as outer wings and horizontal stabilizers. Ensuring accurate real-time reconstruction of their full-field displacement is essential for maintaining positioning accuracy and assembly quality. However, challenges arise due to measurement errors and uncertainties in boundary conditions, which affect the accuracy of displacement reconstruction. To address these challenges, this study proposes a real-time full-field displacement reconstruction method for aircraft tooling positioners based on the superposition of corrected modal shapes. This method, grounded in structural dynamics and the principles of modal superposition, allows for real-time full-field displacement reconstruction using sparse displacement measurements. A boundary stiffness adjustment method is introduced to correct the modal shapes, thus enhancing model accuracy despite uncertainties in boundary conditions. Furthermore, by analyzing the impact of measurement errors, an optimized sensor placement strategy is developed to improve the stability of modal coordinate computations and minimize the influence of measurement errors. Experimental results conducted on two representative types of tooling positioners demonstrate that the proposed method achieves an absolute error of less than 0.063 mm and a reconstruction time of under 0.02 s. Both the accuracy and real-time performance meet the requirements of the assembly site, providing a novel approach for online intelligent monitoring of the tooling positioning accuracy in aircraft assembly.