24 February 2022 in Journal of Electrochemical Science and Engineering
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the virus identified as the cause of the Coronavirus Disease 2019 (COVID-19) outbreak. The gold standard for detecting this virus is polymerase chain reaction (PCR). The electrochemical biosensor method can be an alternative method for detecting several biomolecules, such as viruses, because it is proven to have several advantages, including portability, good sensitivity, high specificity, fast response, and ease of use. This study aims to optimize an electrochemical aptasensor using an AuNP-modified screen-printed carbon electrode (SPCE) with an aptamer to detect RBD protein S SARS-CoV-2. Aptasensors with the streptavidin-biotin system were immobilized on the SPCE/AuNP surface via covalent bonding with linkers to 3-mercaptopropionic acid (MPA) and electrochemically characterized by the [Fe(CN)6]3-/4- redox system using differential pulse voltammetry. The results showed that the immobilized aptamer on the SPCE/AuNP electrode surface experienced a decrease in current from 11.388 to 4.623 µA. The experimental conditions were optimized using the Box-Behnken experimental design for the three factors that affect the current response. The results of the optimization of the three parameters are the concentration of aptamer, incubation time of aptamer, and incubation time of RBD protein S SARS-CoV-2, each of which is 0.5 µg/mL, 40 minutes, and 60 minutes, respectively. The RBD protein S SARS-CoV-2 with various concentrations was tested on an electrochemical aptasensor to determine the detection limit and quantification limit, and the respective results were 2.63 and 7.97 ng/mL. The electrochemical aptasensor that has been developed in this study can be applied to detect RBD protein S SARS-CoV-2 as a COVID-19 biomarker in a simple, practical, and sensitive way.
14 February 2023 in RSC Advances
A detection method based on an electrochemical aptasensor has been developed as an alternative fast, portable, simple, inexpensive, and high-accuracy detection method for detecting the SARS-CoV-2 Spike Receptor Binding Domain (spike RBD). The CeO2@NH2 functionalized Screen Printed Carbon Electrode (SPCE) was used to immobilize an aminated aptamer of spike RBD protein via glutaraldehyde as a linker. The aptamer's interaction with the SARS-CoV-2 Spike RBD was measured via the [Fe(CN)6]4−/3− redox system signal. Experimental conditions were optimized using a Box–Behnken experimental design and showed that the optimal conditions of the SARS-CoV-2 aptasensor were 1.5 ng mL−1 of aptamer, immobilization of aptamer for 60 minutes, and Spike RBD incubation for 10 minutes. The developed aptasensor was able to detect the standard SARS-CoV-2 Spike RBD with a detection limit of 0.017 ng mL−1 in the range of 0.001–100 ng mL−1. This aptasensor was used to detect salivary and oropharyngeal swab samples of normal individuals with the addition of Spike RBD, and the recoveries were 92.96% and 96.52%, respectively. The testing on nasopharyngeal swab samples of COVID-19 patients showed that the aptasensor results were comparable with the qRT-PCR results. Thus, the developed aptasensor has the potential to be applied as a SARS-CoV-2 rapid test method for clinical samples.
1 August 2018 in Journal of Physics: Conference Series
When ultrasonic propagates as a wave, the frequencies contained in the propagated waves may carry information regarding to the medium. The transformation of time-domain propagated signals into those of frequency domain is a common digital signal processing (DSP) technic to extract such important information. This requires quite a high resolution of the detection device which relates to the high frequency ultrasonic waves. The advancement of microprocessor technologies enables the complex and fast digital signal processing in the frequency domain. This allows measurement and evaluation using a broadband frequency domain analysis which is effective in the extraction of information contained in the ultrasonic signals. This work presents the implementation of Fourier transform of propagated ultrasonic signals through air medium. The generation of ultrasonic waves employs two pairs of transmitter-receiver ultrasonic transducers which have the center frequencies of 200 kHz and 1 MHz, respectively. The transmitter transducer was excited by a 107.1-ns negative spike to generate ultrasonic waves propagating through the air and converted into an electrical signal by a receiver transducer. This was amplified and recorded as a digital signal for subsequent offline digital signal processing.
20 September 2024 in Journal of Science: Advanced Materials and Devices
27 February 2024 in MethodsX
This method introduces a methodological approach for comprehensively analyzing COVID-19 outbreaks using Gaussian pulse models to assess transmission rates. Our methodology is designed to provide an in-depth understanding of the intricate dynamics underlying the spread of COVID-19. By incorporating Gaussian pulse models into our approach, we capture temporal and spatial outbreaks' characteristics with high precision. This method provides a detailed overview of our methodological approach, underscoring its potential to revolutionize our comprehension of COVID-19 outbreak dynamics. • Our methodology involves the application of Gaussian pulse models to the transmission rate estimation. • Parameter estimation in epidemic modeling involves adjusting key factors like transmission rate, and effective reproduction number to best match observed data. • We use Microsoft Excel's Solver add-in with the GRG algorithm to find the best parameter values, improving the data fit.