Kailiang Yu

Kailiang Yu

Auto-generated profile, based on publicly available information

Kailiang Yu

Nanyang Technological University

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 June 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KYKailiang Yu
Kailiang Yu
ZWZheng Wang
Zheng Wang
Position sensorless control of interior permanent magnet synchronous motors (IPMSMs) is of great importance for the sake of the cost reduction and robustness improvement. An improved position sensorless method based on adjustable high-frequency (HF) square-wave voltage injection has been proposed for the IPMSM drive under zero- and low-speed regions. The general detection method of position from positive- and negative-sequence HF current response has been developed by the simple algebraic operations of data at some adjacent sampling instants. In addition, the proposed method not only can retain the advantage of the removal of low-pass filters in current feedback but also can increase the voltage margin of inverter with adjustable frequency setting of HF signal compared with existing square-wave voltage injection methods. Comprehensive experimental results have been given to verify the proposed theoretical analysis.

1 August 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KYKailiang Yu
Kailiang Yu
ZWZheng Wang
Zheng Wang
MGMinrui Gu
Minrui Gu
XWXueqing Wang
Xueqing Wang
The fault-tolerant control method of dual three-phase permanent-magnet synchronous motor (PMSM) drives has gained more and more attention in some applications, such as aircraft system and offshore wind energy system. In this letter, the reason for the torque ripple caused by the standard control method has been investigated in view of the frequency domain after the occurrence of a single open-phase fault. Based on the theoretical analysis, a universal control scheme has been proposed for the dual three-phase PMSM drives with two isolated neutral points, which can be implemented under either healthy condition or fault condition. The key is to modify with a closed-loop controller on harmonic subspace with the notch filter. The proposed method not only realizes the seamless transition between two operation conditions without fault diagnosis but also avoids the reconfiguration of the control structure. Moreover, the system optimization of the minimum copper loss under postfault condition has been integrated into the proposed method. The experimental results are presented to illustrate the effectiveness of the proposed method.

7 January 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KYKailiang Yu
Kailiang Yu
ZWZheng Wang
Zheng Wang
The dual three-phase variable-flux permanent-magnet synchronous motors (VF-PMSM) have received more attention in the variable-speed drive applications since they have advantages of high-efficiency in flux-tuning ability, low current stresses in phase legs and high fault-tolerant capability. The magnetization-state of the permanent magnets in VF-PMSM can be manipulated by the larger d -axis current pulse. However, the accompanied issues of parameter variation and inherent model uncertainty in magnetization manipulation of VF-PMSM increase the difficulty in parameter tuning for conventional proportional-integral controller, which deteriorates the control performance in current loop. To achieve the high performance of current tracking, an improved deadbeat predictive current control (DPCC) with composite disturbance observer has been proposed for dual three-phase VF-PMSM in this article. In the proposed composite disturbance observer, the generalized proportional--integral observer (GPIO) is employed for tracking the time-varying disturbance, and the sliding-mode observer is designed to reduce the settling time caused by the high-order GPIO for the improvement of the system dynamics. The analysis about the bandwidth-parameterized method has been presented for tuning the coefficients of the composite observer. The experimental results are presented to verify the validity of the proposed DPCC with composite disturbance observer for dual three-phase VF-PMSM drives under model uncertainty and different operating conditions.

26 March 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
KYKailiang Yu
Kailiang Yu
ZWZheng Wang
Zheng Wang
XWXueqing Wang
Xueqing Wang
Zhixiang ZouZhixiang Zou
Zhixiang Zou
The rotor flux linkage of permanent-magnet synchronous motor (PMSM) is of great importance for monitoring and high-performance control. However, most of the existing online estimation methods need prior knowledge of other PMSM parameters such as stator resistance and dq axis inductance, which are difficult to realize in the rank-deficient models of electrical machines. This article proposes a simple online estimation method of rotor flux linkage for the dual three-phase surface-mounted PMSM (SPMSM) drives with the assistance of injected position offset. The independent estimation model has been developed for the rotor flux linkage by appropriate setting of positon offset between two sets of three-phase windings of dual three-phase SPMSM drives. The proposed method not only has little influence on the output torque and high signal-to-noise ratio for observation, but also offers the superior performance in estimation accuracy irrespective of the influence of VSI nonlinearity. In addition, the proposed position-offset-based method is suitable for the full-speed region including the field-weakening operation. Finally, comprehensive experimental results are presented to verify validity of the proposed method under different working conditions.

21 November 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
ZWZheng Wang
Zheng Wang
KYKailiang Yu
Kailiang Yu
YLYuqing Li
Yuqing Li
MGMinrui Gu
Minrui Gu
Dual three-phase interior permanent-magnet synchronous motor (IPMSM) drives have received more attention by the merits of better fault-tolerant capability and lower torque ripples. To improve the reliability of the system against failures in position sensor, it is necessary to investigate the position estimation method for dual three-phase IPMSM drives. The high-frequency (HF) signals injection is utilized for position estimation in three-phase IPMSM drives during low-speed operation region. However, the torque ripples are inevitable owing to the mixing of fundamental and HF components in the same control space for three-phase IPMSM drives. In this article, the position sensorless control method has been proposed by injecting HF square-wave voltage in the harmonic subspace for the dual three-phase IPMSM drives. Since the harmonic subspace is decoupled from the torque subspace, the torque disturbance can be mitigated well with the proposed HF signal injection-based position sensorless method. Moreover, the digital filters in signal extraction and current feedback can be avoided and the signal separation process becomes easy with the proposed method. The experiments have been conducted to validate the performance of the proposed method.

10 May 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
KYKailiang Yu
Kailiang Yu
ZWZheng Wang
Zheng Wang
Accurate and updated knowledge of electrical parameters is of great importance for high-performance control of motor drives. However, the common challenging issue in existing identification methods is to construct a full-rank model with low parameter coupling. In this article, an online multiparameter identification method has been proposed for the dual three-phase interior permanent-magnet synchronous motor (IPMSM) drives with position-offset and high-frequency (HF) square-wave voltage injection. Thanking to the simplified amplitude extraction process, the inductance parameters can be conveniently calculated from HF current amplitude under HF square-wave voltage injection. On this basis, the position-offset injection based model has been developed for the individual identification of the rotor flux linkage. Finally, the resistance can be estimated according to the steady-state voltage equations in harmonic subspace with the aid of known inductance. With the constructed multisource identification models, the rank-deficient problem of multiparameter estimation can be solved. Furthermore, the additional control dimensions of dual three-phase IPMSM have been utilized to avoid the torque disturbance from position-offset injection. The experimental results are presented to verify performance of the proposed method.