Herein, recent advances, current limitations, and open challenges in the design, modeling, and control of continuum robots are discussed. Thanks to their lean bodies, these robots achieve a long reach through narrow and tortuous environments, enabling currently unachievable tasks for medical, industrial, and service applications. The recent surge in research on these robots leads to significant advances in design, modeling, and control methods. Herein, these developments with a comprehensive review of existing continuum robots and emerging technologies are examined. Then, modeling and control approaches are compared, and navigation strategies exclusive to continuum robots, such as follow the leader, coiling, and circumnutation are examined. Finally, an overview of their applications is provided with a focus on industrial and service tasks, outlining open research challenges and future developments.
A twisting problem is identified from the central located flexible backbone continuum robot. Regarding this problem, a design solution is required to mechanically minimize this twisting angle along the backbone. Further, the error caused by the kinematic assumption of previous works is identified as well, which requires a kinematic solution to minimize. The scope of this paper is to introduce, describe and teste a novel design of continuum robot which has a twin-pivot compliant joint construction that minimizes the twisting around its axis. A kinematics model is introduced which can be applied to a wide range of twin-pivot construction with two pairs of cables per section design. And according to this model, the approach for minimising the kinematic error is developed. Furthermore, based on the geometry and material property of compliant joint, the work volumes for single/three-section continuum robot are presented, respectively. The kinematic analysis has been verified by a three-section prototype of continuum robot and adequate accuracy and repeatability tests carried out. And in the test, the system generates relatively small twisting angles when a range of end loads is applied at the end of the arm. Utilising the concept presented in this paper, it is possible to develop a continuum robot which can minimize the twisting angle and be accurately controlled. In this paper, a novel design of continuum robot which has a twin-pivot compliant joint construction that minimizes the twisting around its axis is introduced, described and tested. A kinematics model is introduced which can be applied to a wide range of twin-pivot construction with two pairs of cables per section design. Furthermore, based on the geometry and material property of compliant joint, the work volumes for single/three-section continuum robot are presented, respectively. Finally, the kinematic analysis has been verified by a three-section prototype of continuum and adequate accuracy and repeatability tests carried out.
19 January 2022 in IEEE/ASME Transactions on Mechatronics
This letter presents two long continuum robots, inserted through small holes, and working collaboratively in a crammed space to manipulate an extreme-temperature (>2000 °C) flame for coating repair on aeroengines without the need of their disassembly. One robot (Adder) carries a thermal spray nozzle while the other (Observer) carries cameras and a flame ignitor, supporting the locomotion and operation of the Adder, which was demonstrated on a real aeroengine offering advantages in both operational time and repair costs.