Farid Nouar

Farid Nouar

Auto-generated profile, based on publicly available information

Farid Nouar

Institut des Matériaux Poreux de Paris, ESPCI Paris, Ecole Normale Supérieure, CNRS, PSL University, 75005 Paris, France

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 November 2023 in Advanced Functional Materials
Verified
Journal Article
Open access
DCDebanjan Chakraborty
Debanjan Chakraborty
AYAysu Yurdusen
Aysu Yurdusen
GMGeorges Mouchaham
Georges Mouchaham
FNFarid Nouar
Farid Nouar
CSChristian Serre
Christian Serre
Metal–organic frameworks (MOFs) show captivating performances in many large‐scale applications including gas adsorption and separation, heat reallocation, water production, or remediation which can overcome important drawbacks of the conventionally used porous materials in the industry. This raises, therefore, the commercial interest in MOFs which brings the necessity to decrease the cost of their production, calling for the synthesis optimization from small‐scale to large‐scale. However, the commercial availability, yet very limited, is highly dependent on their production cost. Thus, to promote the commercial development and availability of MOFs, many steps can be taken. In this work, the state‐of‐art of the large‐scale production of MOFs can be first outlined, before discussing the criteria of greener MOF synthesis processes. Besides, a critical evaluation of the available synthesis routes for large‐scale production can be given, taking into consideration their cost, environmental impact, safety, and feasibility. Moreover, since there are strong limitations to the use in the powder form, the shaping procedures can thus be discussed briefly to outline the prospects of MOFs for different industrial applications. Finally, yet importantly, the perspective for MOFs commercialization can be highlighted with an emphasis on the necessity of techno‐economic analyses and life‐cycle assessments.

19 April 2021 in Faraday Discussions
Verified
Journal Article
Closed access
PDF file
MSMaria Inês Severino
Maria Inês Severino
EGEffrosyni Gkaniatsou
Effrosyni Gkaniatsou
FNFarid Nouar
Farid Nouar
Moisés Luzia PintoMoisés Luzia Pinto
Moisés Luzia Pinto
CSChristian Serre
Christian Serre
The potential of safe and low-cost batch production processes for Metal–Organic Frameworks (MOFs) at an industrial scale has been evaluated based on the prototypical MOF MIL-160(Al), a bio-derived material of high practical interest that can be made with a high space-time yield using green ambient pressure conditions. A simple method to calculate the production cost of this material has been determined based on a simulated process constructed with the data collected from laboratory pilot large-scale tests taking into account for the first time in MOF cost evaluation all the process parameters such as the scale, the cost of the raw materials, recirculation, and washing. The investment for a production plant established the ground for the estimation of the complete cost. The expected cost ranged from ca. 55 $ per kg at 100 tons per year down to 29.5 $ per kg for 1 kton per year production with longer term perspectives of reaching costs below 10 $ per kg once the bio-derived ligand is considered for the large-scale production of bioplastics.

22 January 2025 in Industrial & Engineering Chemistry Research
Verified
Journal Article
Open access
MSMaria Inês Severino
Maria Inês Severino
CFCátia Freitas
Cátia Freitas
VPVanessa Pimenta
Vanessa Pimenta
FNFarid Nouar
Farid Nouar
Moisés Luzia PintoMoisés Luzia Pinto
Moisés Luzia Pinto
CSChristian Serre
Christian Serre
Understanding the impact of MOF synthesis conditions on the production cost is vital in order to have a competitive product with a view toward industrial applications. Here, considering the benchmark mesoporous iron(III) trimesate MIL-100(Fe) as a prototypical example, we show that the production cost can reach <30 $/kg if a careful selection of the synthetic route is made. Two routes were considered in the analysis, using sulfate and nitrate as iron sources. A new optimized synthesis protocol in a 5 L laboratory pilot-scale reactor based on iron sulfate was developed using optimized sustainable aqueous ambient pressure conditions, leading to larger particles and a higher space-time yield. Based on reliable pilot-scale data and established chemical engineering estimation methods, this leads to a significantly lower production cost of high-quality MIL-100(Fe), achieving a potential competitive product.

5 June 2022 in Advanced Science
Verified
Journal Article
Open access
PBPedro F. Brântuas
Pedro F. Brântuas
AHAdriano Henrique
Adriano Henrique
MWMohammad Wahiduzzaman
Mohammad Wahiduzzaman
AWAlexander von Wedelstedt
Alexander von Wedelstedt
TMTanmoy Maity
Tanmoy Maity
CSChristian Serre
Christian Serre
Zeolites and metal‐organic frameworks (MOFs) are considered as “competitors” for new separation processes. The production of high‐quality gasoline is currently achieved through the total isomerization process that separates pentane and hexane isomers while not reaching the ultimate goal of a research octane number (RON) higher than 92. This work demonstrates how a synergistic action of the zeolite 5A and the MIL‐160(Al) MOF leads to a novel adsorptive process for octane upgrading of gasoline through an efficient separation of isomers. This innovative mixed‐bed adsorbent strategy encompasses a thermodynamically driven separation of hexane isomers according to the degree of branching by MIL‐160(Al) coupled to a steric rejection of linear isomers by the molecular sieve zeolite 5A. Their adsorptive separation ability is further evaluated under real conditions by sorption breakthrough and continuous cyclic experiments with a mixed bed of shaped adsorbents. Remarkably, at the industrially relevant temperature of 423 K, an ideal sorption hierarchy of low RON over high RON alkanes is achieved, i.e., n‐hexane ≫ n‐pentane ≫ 2‐methylpentane > 3‐methylpentane ⋙ 2,3‐dimethylbutane > isopentane ≈ 2,2‐dimethylbutane, together with a productivity of 1.14 mol dm−3 and a high RON of 92, which is a leap‐forward compared with existing processes.

6 October 2020 in medRxiv
Verified
Preprint
Open access
PDF file
JOJason Mathew Ornstein
Jason Mathew Ornstein
RORay O.K. Ozdemir
Ray O.K. Ozdemir
ABAnne Boehme
Anne Boehme
FNFarid Nouar
Farid Nouar
CSChristian Serre
Christian Serre
Joshua L. SantarpiaJoshua L. Santarpia
Joshua L. Santarpia
As the world recovers from the lockdown imposed by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) pandemic, returning to shared indoor spaces is considered a formidable risk. It is now clear that transmission of SARS-CoV-2 is driven by respiratory microdroplets expelled by infected persons, which can become suspended in the air. Several layering technologies are being explored to mitigate indoor transmission in the hopes of re-opening business, schools and transportation systems. Here we coupled the water adsorptive and photocatalytic capacity of novel Metal Organic Frameworks (MOFs) to demonstrate the capture and inactivation of SARS-CoV-2. Discussion is given on the methods of analysis and the differences between the photocatalytic activity of several MOFs, and the difference between MOF induced photocatalysis and ultra violet photolysis of SARS-CoV-2. Our results are intended to provide support to industry looking for alternative methods secure indoor spaces.

19 September 2023 in ChemRxiv
Verified
Preprint
Open access
PDF file
NSNicolas Sadovnik
Nicolas Sadovnik
PLPengbo Lyu
Pengbo Lyu
FNFarid Nouar
Farid Nouar
MMMégane Muschi
Mégane Muschi
Menghao QinMenghao Qin
Menghao Qin
MDMarco Daturi
Marco Daturi
Addressing the challenge of purifying poor-quality indoor air while respecting the principles of sustainable development requires innovative, advanced sustainable materials. Coupling state-of-the-art spectroscopic techniques with theoreti-cal calculations, we revealed an advantageous mild chemisorption synergistic mechanism for trapping the most harmful indoor pollutant (i.e. formaldehyde) in a reversible way, without significant energy penalties for regeneration. Based on these data we have designed a facile green and scalable synthesis protocol, and shaped a porous water stable Al pyra-zole dicarboxylate metal-organic framework able to perform as a highly efficient reusable filter. This MOF, denoted Al-3.5-PDA or MOF-303, shows unprecedented selectivity and storage capacity for formaldehyde, in conditions repre-sentative of severe use in housing or vehicle cockpits (variable VOC mixtures and concentrations, humidity, tempera-ture), without any accidental release. Moreover, it can be easily regenerated by a domestic protocol guarantying reuse of the filter for a number of cycles representing at least 10 years of continuous use.