15 January 2025 in Nature
2 August 2024 in Chemistry of Materials
25 April 2025 in Chemistry of Materials
22 November 2024 in ECS Meeting Abstracts
Lithium/sulfur cell chemistry combines low material cost and high availability of sulfur with high specific energies. However, liquid electrolyte cells are plagued by the parasitic polysulfide shuttle effect between the electrodes, which reduces reversible capacity and efficiency and passivates the negative electrode. Inorganic solid electrolytes (SE) are single-ion conductors and can therefore block the parasitic electrode crosstalk by blocking polysulphide dissolution and transport. In particular, the combination of sulfur battery chemistry with thiophosphate-based SEs is considered obvious due to their high ionic conductivities and their electrochemical stability window corresponding to the usual voltage ranges used in lithium/sulfur battery chemistry. Lithium/sulfur solid-state batteries (SSLSBs) based on thiophosphate SE are generally reported to have higher capacities, based on the mass of active material, than their liquid counterparts. These can reach up to the theoretical capacity of sulphur (1672 mAh g-1) and even beyond, implying a capacity contribution from the SE and its degradation products. As the degradation products potentially block ionic conduction pathways, this is often considered undesirable. However, other work has reported stable cycling of carbon/SE composites without the addition of additional active material, postulating in situ formation of active material by degradation of the SE. In this work we show the capacity contribution of the SE by introducing a balance of charge and discharge capacity in SSLSBs. By comparing positive electrode composites with and without additional sulfur as an active material, we show the importance of the storage capacity contribution of the thiophosphate SE in state-of-the-art electrode composites. Using electrochemical and instrumental analysis (XPS, ToF-SIMS), we investigate the formation of degradation products during the first cycles and their reversible redox during cycling. Based on this, we postulate that a controlled amount of degradation may be useful in SSLSBs and that this additional role of SE as a contributor of charge storage capacity may be a design principle for the development of high capacity positive electrode composites.
10 November 2026 in ACS Energy Letters
Understanding dynamic reaction pathways in all-solid-state batteries remains challenging because electrochemical processes occur at buried solid–solid interfaces and transient intermediates are difficult to detect with conventional analytical techniques. While operando techniques typically probe structural or macroscopic changes, direct detection of reactive species during operation remains experimentally demanding. Here, we introduce a dynamic operando time-of-flight secondary ion mass spectrometry platform that enables continuous chemical analysis of processes in a solid-state battery under electrochemical bias. Using this approach, we directly observe a pronounced increase of the I2– signal during charging of a Li–S composite cathode containing LiI, indicating the formation of elemental iodine. Concurrent changes in the sulfur-containing ion signals suggest the involvement of iodine species in the ongoing redox processes. These results reveal transient, low-concentration species at buried interfaces undetectable by other operando techniques, offering a pathway for identifying reactive intermediates in conversion-type solid-state batteries and related electrochemical systems.
9 October 2026 in Nature Communications
All-solid-state lithium-sulfur batteries promise high specific energy and low cost. However, they are challenged by poor rate capability and cycling stability owing to the slow solid-solid sulfur redox reactions. Here, we present fast-charging and durable all-solid-state lithium-sulfur batteries enabled by a pre-embedded solid-solid redox mediator using an amorphous sulfur/iodine nano-eutectic positive electrode. The iodine, intimately homogenized with sulfur owing to carbon mesopore encapsulation, undergoes rapid I2/I− redox reaction, mediating solid-solid sulfur reactions by promoting electron transfer across the boundaries. The iodine within the carbon and on its surface reacts in situ with the sulfide catholyte to form a globally distributed I2/I− nano-network throughout the positive electrode, thereby enabling fast charging. The cell exhibits a specific capacity of 851.9 mA h g−1S/I when charged at 10 C, and 474.7 mA h g−1S/I at a charging rate of 24 C (1 C is defined as 945 mA g−1S/I). The high reversibility of the redox-mediated reaction enables durable cycling for 9,000 cycles over 9 months at 2 C and 2,800 cycles over 17 months at 0.5 C. This strategy represents a perspective for developing solid-state conversion electrodes that are plagued by sluggish reactions.