High-intensity coal mining (large mining height, shallow mining depth, and rapid advancing) frequently causes large-scale ground damage within a short period of time. Understanding mining subsidence under high-intensity mining can provide a basis for mining-induced damage assessment, land remediation in a subsidence area, and ecological reconstruction in vulnerable ecological regions in Western China. In this study, the mining subsidence status of Shendong Coalfield was investigated and analyzed using two-pass differential interferometric synthetic aperture radar (DInSAR) technology based on high-resolution synthetic aperture radar data (RADARSAT-2 precise orbit, multilook fine, 5 m) collected from 20 January 2012 to June 2013. Surface damages in Shendong Coalfield over a period of 504 days under open-pit mining and underground mining were observed. Ground deformation of the high-intensity mining working faces 22201-1/2 in Bu’ertai Mine, Shendong Coalfield was monitored using small baseline subset (SBAS) InSAR technology. (1) DInSAR detected and located 85 ground deformation areas (including ground deformations associated with past-mining activity). The extent of subsidence in Shendong Coalfield presented a progressive increase at an average monthly rate of 13.09 km2 from the initial 54.98 km2 to 225.20 km2, approximately, which accounted for 7% of the total area of Shendong Coalfield; (2) SBAS-InSAR reported that the maximum cumulative subsidence area reached 5.58 km2 above the working faces 22201-1/2. The advance speed of ground destruction (7.9 m/day) was nearly equal to that of underground mining (8.1 m/day).
China’s “plain–mountain transition zone” (hereinafter referred to as the “transition zone”) has experienced rapid and diverse urbanization processes. Assessing the dynamic characteristics of urbanization is particularly important for sustainable development of the transition zone. Nighttime light (NTL) data have been widely used to monitor urbanization. Based on the prolonged artificial nighttime-light dataset of China (PANDA) from 1984 to 2020, we partitioned the nighttime light of the study area into four types (low, medium, high, and extremely high) by adjusting the threshold of the brightness gradient (BG) method. The spatiotemporal characteristics of urbanization in 426 districts and counties of 71 prefecture-level cities in the transition zone were analyzed. Our results indicated that the middle region of the transition zone (Yanshan Mountains and Taihang Mountains) experienced the fastest urbanization development, and the urban expansion speed broke through the topographic limitation of the plain–mountain. However, the rapid development of urbanization in the middle plains resulted in the nighttime lighting area (NTLA) tending to become saturated, which caused an unsustainable potential crisis in urban development in this area. Urbanization was mainly manifested in the transition of the low nighttime lighting type (NTLT) to the medium NTLT or higher NTLT. The northern region of the transition zone (Greater Khingan Mountains) experienced the slowest urbanization development, with the lowest nighttime lighting density (NTLD) in the northern mountainous area, where the urbanization was mainly manifested by the expansion of the low NTLT. The urbanization development of the southern region in the transition zone (Wushan and Xuefeng Mountains) was at a medium level, and the urbanization of the plain in the southern region was also better than that of the mountainous area. Urbanization was mainly manifested in the expansion of the low NTLT, supplemented by the transition from the low NTLT to high NTLT. Whether in the north, middle, or south of the transition zone, the plain–mountain topographic variations caused a gap in urbanization, making the urbanization development of the mountains and plains unbalanced.
Study on land use/cover can reflect changing rules of population, economy, agricultural structure adjustment, policy, and traffic and provide better service for the regional economic development and urban evolution. The study on fine land use/cover assessment using hyperspectral image classification is a focal growing area in many fields. Semisupervised learning method which takes a large number of unlabeled samples and minority labeled samples, improving classification and predicting the accuracy effectively, has been a new research direction. In this paper, we proposed improving fine land use/cover assessment based on semisupervised hyperspectral classification method. The test analysis of study area showed that the advantages of semisupervised classification method could improve the high precision overall classification and objective assessment of land use/cover results.
In the operation and maintenance of the South–North Water Transfer Project, monitoring and predicting the canal slope deformation quickly and efficiently is one of the urgent problems to be solved. To predict the slope deformation of the deep excavated canal section at the head of the canal. We propose a new idea of adopting the joint prediction of MT-InSAR and Fbprophet. Firstly, MT-InSAR monitoring technology was used to invert channel deformation using 88 Sentinel-1A orbit-raising image data with a time baseline from 2017 to 2019. The time-series deformation of nine monitoring points was also extracted, and it was found that the time-series curves of the cumulative deformation of the channel slope showed fluctuations. The Fbprophet algorithm was then used to train the prediction model in Python to predict the channel slope deformation over the next 365 days. Finally, the prediction results were compared with the MT-InSAR monitoring values to analyze the prediction accuracy and applicability of the Fbprophet algorithm for the slope deformation monitoring of the South–North Water Transfer Project. The results show that: the deformation rate of the slope of the deep excavation section is in the range of 10 mm/a to 25 mm/a, the maximum accumulated deformation is about 60 mm, and the slope of the excavation canal shows a lifting phenomenon; among the nine monitoring points, the minimum and maximum predicted values of deformation using the machine learning prediction model trained in this paper were 56 mm and 73 mm, respectively; comparing the predicted and monitored values, their correlation coefficients were 0.998 at the highest and 0.988 at the lowest, and the minimum and maximum values of RMSE (RootMean Square Error) were 0.72 mm and 2.87 mm, respectively. It shows that the prediction model trained by the Fbprophet algorithm in this paper applies to the prediction of slope deformation in the deep excavation section, and our prediction results can provide a data reference for disaster prevention and the sustainable development of the South–North Water Transfer Project.
In the underground environment, it is difficult to obtain spatial three-dimensional data because of occlusion and its complexity. Mobile light detection and ranging (LiDAR) measurement technology has the ability to obtain three-dimensional spatial information quickly and accurately, but in the underground environment, because of the lack of global navigation satellite system (GNSS) signal in the integrated navigation system, the measurement accuracy decreases with the increase of time. In this paper, an extended Kalman filter-based loose mode is constructed using the real coordinates of the center of gravity of the target and the measurement information of the laser foothold. It provides an additional space-time reference for the integrated navigation system of the mobile LiDAR system and restricts the errors. The simulation results show that the proposed method can effectively improve the measurement accuracy of mobile LiDAR system and enhance the 3D spatial perception ability of underground space.
31 December 2011 in Transactions of Nonferrous Metals Society of China