6 January 2024 in Applied Surface Science
26 September 2024 in Optics Letters
Metalenses, boasting outstanding focusing efficiency and high-resolution imaging capabilities, have generated widespread usage in fields such as integrated optics, achromatic imaging, and optical holography. In this study, we have developed a broadband achromatic metalens within the detection range from 3 to 5 µm, and it has a numerical aperture (NA) of 0.71 with a remarkable maximum focusing efficiency of 63.8% at the focal plane within the specified bandwidth. We have further delved into the dispersion control mechanism that combines the geometric and transmission phases and optimized the constructed phase response simulation database using the particle swarm optimization (PSO) algorithm, ensuring a precise phase matching between the actual wavefront and the ideal focusing wavefront. This metalens with its ability to expand the array size has the potential to create a compact infrared imager, which holds significant importance in achieving efficient detection and integration within infrared detectors.
19 April 2023 in IEEE Photonics Technology Letters
Digital color imaging relies on spectral filters on top of a pixelated sensor, such as a CMOS image sensor. The resolution of the image sensor depends on the pixel size. To improve the imaging quality, smaller pixel and spectral filters are therefore required. Dielectric nanostructures, due to their resonant behavior and its tunability, offer the possibility to be assembled into miniature spectral filters, which could potentially replace conventional pigmented and dye-based color filters. In this letter, we designed a color filter based on a rectangular metal aluminum array structure, with a thickness of only 125nm, about one-eighth of a conventional chemical color filter. The influence of array cycle, dielectric layer structure and other parameters on the transmission spectrum and the color filter characteristics were investigated using the Finite Difference Time Domain. By numerical simulation, at a pixel size of $1.2~\mu \text{m}$ , the transmittance of RGB is as high as 82%, 70%, and 91%. The nanostructured color filter can have potential applications in the field of high-resolution color imaging.
18 December 2025 in Photonics Research
Ultra-compact spectrometers have attracted significant attention for their potential applications in portable systems for biomedical analysis, environmental monitoring, spectral analysis, and astronomical observation. In this work, we propose a miniaturized InGaAs-based extended short-wave infrared (eSWIR) spectrometer based on a single n-graded-p junction with voltage-tunable optical response characteristics in the range from 1600 to 2100 nm. We combine this unique optical characteristic with a regression algorithm to realize the reconstruction of an unknown spectrum. The spectrometer achieves a high responsivity of 0.73 A/W at 1650 nm, and a low dark current density of 3.91×10 −5 A/ cm 2 at 200 K, corresponding to a calculated detectivity of 1.69×10 11 cm · Hz 1/2 /W. Such spectrometers compatible with standard III–V processes can offer a pathway to greatly promote the development of miniaturized spectrometers.
1 December 2025 in APL Photonics
Short-wave infrared (SWIR) detectors hold significant application potential in fields, such as optical communications, low-light night vision, and LiDAR. In recent years, SWIR detectors have been advancing toward higher integration, enhanced sensitivity, miniaturization, and lower power consumption. Utilizing the precise control of optical wavefront phase and amplitude by metasurfaces enables efficient light focusing. This work proposes a scheme for the direct on-chip integration of a solid-immersion metalens with an InGaAs/InP PIN infrared detector. The integrated metalens-enhanced detector achieves a 2.4-fold improvement in responsivity compared to the detectors without metalens within the communication band and yields a specific detectivity of 2.37 × 1011 cm Hz1/2/W. This approach significantly enhances detector responsivity without introducing additional dark current or capacitance, thereby paving the way for the development of highly sensitive and miniaturized infrared detectors.
30 October 2026 in Photonics Research
Silicon photonics enables miniaturization, high performance, and cost-effective manufacturing of optoelectronic systems; however, its extension to the mid-wave infrared (MWIR) is hindered by fundamental thermal noise limitations intrinsic to low-photon-energy detection and the cryogenic cooling requirements of conventional MWIR detectors, both of which impede monolithic integration. To address these challenges, we report an InAsSb pBn-type photodetector directly onto the low-defect-density GaSb/Si template, prepared via a patterned Si substrate. At 150 K without an antireflection coating, the device achieved an external quantum efficiency of 64.3%, a peak responsivity wavelength of 3.84 μm, a specific detectivity of 6.14×10 10 Jones at −10 mV, and a responsivity of 1.86 A/W. These results demonstrate high-performance MWIR detection and validate the feasibility of monolithic MWIR-silicon photonic integration.