A silver-copper (Ag-Cu) nanopaste that formulated by mixing Ag and Cu nanoparticles with an organic binder and solvent system for high-temperature die-attach application has been reported. Various weight percent of Cu nanoparticles (20-80 wt%) was loaded in the nanopaste, in order to investigate its effect on physical and electrical properties of the sintered nanopaste at 380 °C without application of external pressure. X-ray diffraction results showed that Ag97Cu3, Ag1Cu99, and CuO phases were formed in sintered nanopaste. Porosity of the sintered nanopaste was increased as the loading of Cu increased. A reversed trend has been recorded in the density of the sintered samples. Surface micrographs and topographs were examined by scanning electron microscope and atomic force microscope, respectively. The structural properties obtained from both characterizations were in agreement. Electrical study showed that the sintered nanopaste has electrical conductivity ranging between 2.27×105 and 0.81×105 (Ω-cm)-1 with a reducing value as the loading of Cu increases. These values, supported by other complementary characterizations results, have demonstrated that this nanopaste is able to be considered as the alternative die-attach material for high-temperature applications.
A novel stencil-printable silver-copper (Ag-Cu) nanopaste that serves as an alternative high temperature die attach material was introduced in this study. The nanopaste was made by mixing 50 nm-sized of Ag and Cu particles with an organic binder system. Sintering temperatures, up to 450°C, were used to sinter nanopaste in air and its post sintered properties were investigated. The viscosity of nanopaste was 350,000 cps and it demonstrated a shear thinning behavior. Scanning electron microscope revealed the change of grain structure with the change in the sintering temperature. Formations of Ag97Cu3 and Ag1Cu99 compounds after sintering were confirmed with X-ray diffraction; and the electrical conductivity of the sintered nanopaste was increased with the increase of the sintering temperature. The study concluded 380°C was the optimum sintering temperature to form a well sintered nanopaste.