16 November 2023 in Nature Communications
Ultra-high extinction ratio (ER) optical modulation is crucial for achieving high-performance fiber-optic distributed acoustic sensing (DAS) for various applications. Bulky acousto-optical modulators (AOM) as one of the key devices in DAS have been used for many years, but their relatively large volume and high power consumption are becoming the bottlenecks to hinder the development of ultra-compact and energy-efficient DAS systems that are highly demanded in practice. Here, an on-chip silicon electro-optical modulator (EOM) based on multiple coupled microrings is demonstrated with ultra-high ER of up to 68 dB while the device size and power consumption are only 260 × 185 μm2and 3.6 mW, respectively, which are at least two orders of magnitude lower than those of a typical AOM. Such an on-chip EOM is successfully applied to DAS with an ultra-high sensitivity of −71.2 dB rad2/Hz (4 pε/√Hz) and a low spatial crosstalk noise of −68.1 dB rad2/Hz, which are very similar to those using an AOM. This work may pave the way for realization of next-generation ultra-compact DAS systems by integration of on-chip opto-electronic devices and modules with the capability of mass-production.
1 May 2013 in Applied Mathematical Modelling
27 October 2023 in IEEE Sensors Journal
Distributed acoustic sensing (DAS) system with point-backscattering-enhanced fiber (PBSEF) has the capability of breaking the signal to noise ratio limit of traditional DAS, therefore, it would become one of the most powerful DAS technologies and expand the applications of DAS systems. To optimize the performance when designing DAS system with PBSEF, it is crucial to understand the relationship between the system noise and the reflectance enhancement, which is yet to be systematically studied. In this paper, both experimental investigation and theoretical analysis of a typical 3×3 heterodyne DAS system with PBSEF were carried out. The relationship between system noise level and the reflectance enhancement was studied by both experiments and simulations. And the results, with good agreements between each other, show that the system noise level drops exponentially as the reflectance increases. With 29.7 dB reflectance enhancement, the system noise level decreased from 9.5 pε/√Hz to 0.44 pε/√Hz. The influences of intensity noise and phase noise were also analyzed based on the theoretical model. The findings of the quantitative relationship and the noise influence can be used as a universal guidance for the design of PBSEF-based high performance DAS systems.
10 April 2024 in IEEE Transactions on Instrumentation and Measurement
The signal-to-noise ratio (SNR) of fiber-optic distributed acoustic sensing (DAS) systems based on Rayleigh backscattered (RBS) signals can be improved using point-backscattering-enhanced fiber (PBSEF). It is necessary to explore the methods to achieve stable and low noise demodulation for PBSEF-based DAS system. Driven by this, this work theoretically analyzes the effect of the phase and intensity noises on the PBSEF-based demodulated signal during averaging process. The results show that the phase noise has a weaker impact on the demodulated phase than the intensity noise. Based on this analysis, two methods, direct averaging and weighted averaging, for suppressing the noise level of DAS have been investigated and the optimal parameters are investigated. For both methods, simulation and experiments show the noise level suppression of 1.5 and 4.4 times, corresponding to the noise level reduction of 0.45 and 3.78 $\text{p}\varepsilon /\surd $ Hz, respectively. The relationship between the system noise level and the number of sampling points used in the demodulation is different for the two methods. The weighted-averaging method demonstrates superior performance for its higher stability. These conclusions provide significant theoretical basis and guidance for the development of practical high-performance DAS systems for field applications.
29 February 2024 in Journal of Lightwave Technology
The measurement of acoustic signals at high frequencies with a large dynamic range remains a challenge for phase-demodulation-based fiber acoustic sensing systems due to the phase wrapping phenomenon. Here, an optical path difference (OPD)-assisted demodulation method aiming at breaking the limitations of phase demodulation is reported. By interrogating an imbalanced Michelson interferometer (IMI) with a frequency-modulated pulse light, a time-resolved interference spectrum is obtained and used for OPD demodulation. Theoretical analysis reveals that the variation amplitude of demodulated OPD signal not only is linearly dependent on the amplitude of the acoustic signal applied to the IMI, but also experiences a gain that is directly proportional to the signal frequency. Consequently, compensation of this gain introduces a noise suppression that favors high-frequency signals, resulting in a higher signal-to-noise ratio (SNR) at high frequencies. The method's capability for detecting both single-frequency and multi-frequency acoustic signals is demonstrated by simulations and experiments, and the results show that the upper-frequency limit of the proposed scheme is at least 40 times the limit of the phase demodulation method for an acoustic signal with an amplitude of 1.135 μϵ. The proposed method can be easily extended to distributed acoustic sensing systems and is of great potential to break the limitation of a restricted dynamic range encountered in traditional phase demodulation methods.
23 April 2021 in Physical Review A
Noise-induced phase transition between chaos and ordered states plays an important role in the self-organization of dissipative structures. Here, we numerically simulate the phase transitions between statistically stationary regimes in a laser cavity by using a stochastic complex cubic-quintic Ginzburg-Landau equation with a phase-diffusion model. Depending on the linear and nonlinear gains, the dissipative system converges from the initial noise floor to different regimes, including continuous wave, phase turbulence, amplitude turbulence (AT), and stable soliton structure. Around the regime boundaries, we found that only certain phase noise can cause the instability of phase turbulence. The defects formed due to the noise will continue to spread out and self-organize to form AT or stabilize the soliton structure in the defect area. Our results are helpful in understanding the dynamics of the buildup of mode locking and noiselike pulses in passively mode-locked lasers.