14 March 2025 in Science Advances
Perovskite quantum dots (QDs) show an excellent application perspective in semiconductor optoelectronic devices. However, problems of ligand loss during the growth, purification, film formation, and storage process always induce the aggregation and ripening of QDs, adversely affecting QDs’ and QD-based devices’ performance. Here, we use a bidentate molecule to control ripening toward a notable performance boost in CsPbI 3 QDs. The strong interaction between QDs and the bidentate molecules maintains stable surface states of QDs, inhibiting QDs’ undesirable ripening and generation of defects. We fabricate QD-based light-emitting diodes (LEDs) with a maximum external quantum efficiency (EQE) of 26.0% at 686 nm and an operating half-life of 10,587 hours at an initial radiance of 190 mW sr −1 m −2 (equivalent to a luminance of 100 cd m −2 for green perovskite LEDs). Benefiting from the high storability of the target QDs, the as-fabricated devices based on the QD solution storing for 1 month show a maximum EQE of 21.7% (20.3% for 3 months).
12 December 2025 in Science Advances
Metal halide perovskite light-emitting diodes (LEDs) are transformative optoelectronic platforms due to their tunable emission, high color purity, and broad color gamut. Nevertheless, the realization of high-luminance blue LEDs, particularly in the deep-blue spectral region, remains challenging compared to their green and red counterparts. This disparity is primarily attributed to the impaired charge transport kinetics and severe nonradiative recombination, both induced by the structural defects in wide-bandgap perovskites. Here, we address this issue through in situ growth of deep-blue–emitting perovskite single-crystal thin films (SCTFs). The resulting SCTFs exhibit exceptional crystallographic orientation, long-range structural ordering, and atomic-level smooth surfaces with a root mean square roughness of 109 picometers. In addition, the SCTFs show a low trap density of 6.9 × 10 14 per cubic centimeter. These structural advantages translate to a high photoluminescence quantum yield of 48% and suppressed nonradiative recombination, enabling deep-blue LEDs with a maximum electroluminescence luminance of 179 candelas per square meter at 419 nanometers.
17 July 2026 in Science Advances
Perovskite quantum dots are promising for near-infrared light-emitting diodes, although they face serious challenges in limited operating device lifetime originating from the complex and disordered surface atomic states. Here, we design and use multifunctional zinc(II) 4-aminobenzenesulfonate to mitigate surface structural disorder in quantum dots, thereby achieving high-performance near-infrared light-emitting diodes. Such an additive, with four functional groups and ions (-NH 2 , -S–O, -S=O, and Zn 2+ ), and that shows double hydrogen–bonding effects, can strengthen surface atom termination and mitigate surface disorder, enabling an improved photoluminescence quantum yield of more than 90%. The as-fabricated light-emitting diodes demonstrated narrow electroluminescence spectra with a full width at half maximum of 42 nanometers at 789 nanometers, a maximum external quantum efficiency of 23.11% with negligible efficiency roll-off (as small as 3% at 100 milliamperes per square centimeter), a radiance of 155,851 milliwatts per steradian per square meter, and an operating lifetime of 2298 minutes at an initial radiance of 1,000 milliwatts per steradian per square meter (39,000 minutes for 190 milliwatts per steradian per square meter). This work represents a substantial improvement in radiance, efficiency roll-off, and operating stability compared with the best previously reported near-infrared perovskite quantum dot light-emitting diodes.