11 March 2024 in IEEE Transactions on Industrial Electronics
In bearingless switched reluctance motor (BSRM) control system, decaying current will be generated after turn- off angle. If the decaying current cannot be controlled effectively, the stable control of torque and suspension force of BSRM during commutation region will be affected. An integrated control of torque and suspension force of BSRM based on dynamic phase commutation and currents distribution is proposed in the article. First, an optimization criterion of turn- off angle is proposed considering the effect of decaying current after turn- off angle on suspension control. The turn- off angle can be adjusted online according to the variation of radial displacement. Then, decaying currents after turn- off angle are used to modulate the current of incoming phase according to the difference of the torque generated by the neighboring phase. The optimization of turn- off angle and the distribution of phase currents ensure the high suspension stabilization and low torque ripple during phase commutation region of BSRM. Simulations and experiments on a three-phase 12/8 BSRM validate the feasibility and effectiveness of the proposed control strategy.
1 January 2025 in IEEE Transactions on Industrial Electronics
Traditional proportion integration differentiation (PID) controller is difficult to solve the contradiction between response speed and overshoot, and its anti-interference ability is limited. To solve the problem, an integrated control strategy of bearingless switched reluctance motor based on active disturbance rejection control (ADRC) is proposed. A first-order speed ADRC controller and a second-order displacement ADRC controller are designed for direct instantaneous torque control and direct instantaneous force control system, respectively. With the integral time-weighted absolute error (ITAE) as the optimization objective, the particle swarm optimization algorithm is used to tune the main parameters of the ADRC controllers, overcoming the drawbacks of adjusting parameters manually, such as complex operation and time consumption. Simulations and experiments are carried out. The results demonstrate that the control strategy has superior dynamic and static response performance in both speed and displacement control and has good application prospects.
12 March 2026 in IEEE Transactions on Industrial Electronics
The article proposes a model predictive suspension force control (MPSFC) to suppress the rotor’s radial displacement of bearingless switched reluctance motor (BSRM) during suspension. It can handle the complex coupling between the torque and suspension systems and between suspension forces in multiple directions which exhibit time-varying characteristics. Within each control step, model predictive control (MPC) will be first implemented for the torque system, where the predicted torque winding current can be obtained to achieve decoupling between the torque winding and the suspension winding with the mutual inductance model. Then, the suspension winding current and suspension force will be predicted sequentially through the prediction model considering one-step delay compensation. The concept of suspension force vector (SFV) is also proposed in this article to present the combined effect of mutually coupled suspension forces. The optimal control voltage vector will be selected by cost function to minimize the deviation between the predictive SFV and the desired one. The experiment results on a three-phase 12/8 BSRM demonstrate the proposed method can significantly reduce the energy consumption and radial displacement of the rotor and achieve robust suspension under low speed and external interference.