17 January 2024 in ACS Nano
22 June 2016 in Microscopy
Cs-corrected atomic resolution scanning transmission electron microscopy under a drift-compensated operation enabled us to acquire high-angle annular dark-field (HAADF) images of entire gold nanorods without distortion induced by specimen drift. The precision in locating the atomic columns was evaluated to be ±5 pm in the images thus obtained, which is comparable to the image pixel size. A high-precision HAADF image of a single-crystalline gold nanorod revealed that the tip portions at both ends tended to undergo outward displacements along the rod axis and inward contraction along the perpendicular direction. A single nanosecond pulse shot of laser light with a wavelength of 1064 nm and an average intensity of 7.3 kJ/m 2 pulse deformed the nanorods into spherical shapes. Simultaneously, the particle interior was completely changed into a multiple twin structure. Substantial displacements of atomic columns on the order of several tens of picometers were confirmed to be localized in the corners of domains at multiple twin junctions. Both the magnitude and direction of displacements were linearly relaxed with increasing distance from a multiple junction.
3 October 2023 in Advanced Energy Materials
Enhancing the understanding of fast lithium intercalation on cathode surfaces modified by oxides is crucial for the development of electrode materials that offer high‐power and long‐life operation. Herein, lithium transfer is elucidated by directly observing the structural changes within the cathode, through the interface, and into the electrolyte using in situ neutron reflectometry (NR). Two films are studied—a Li2ZrO3‐modified and an unmodified LiCoO2 film—and it is found that the modified film exhibits a superior rate capability. In situ NR studies indicate that the surface modification facilitates the formation of a dense cathode–electrolyte interphase (CEI), primarily composed of inorganic species. In contrast, the unmodified surface is covered by a relatively sparse and electrolyte‐impregnated CEI. These structural observations suggest that lithium desolvation during intercalation primarily occurs on the CEI and LiCoO2 surfaces for the modified and unmodified films, respectively. Fast desolvation of lithium on the CEI may contribute to the superior rate capability of the surface‐modified cathodes. This suggests a mechanism of fast intercalation achieved by surface modification of low ionically conductive oxides. Simultaneous chemical composition and morphological information is a powerful way to elucidate the dynamics at cathode/liquid electrolyte interfaces suitable for high‐power operation.
9 October 2023 in Nano Letters
28 December 2021 in ACS Nano