Na0.6[Li0.2Ni0.2Mn0.6]O2 is synthesized by a self-combustion reaction (SCR) and studied for the first time as a cathode material for Na-ion batteries. The Na0.6[Li0.2Ni0.2Mn0.6]O2 cathode presents remarkable high rate capability and prolonged stability under galvanostatic cycling. A detailed analysis of X-ray diffraction (XRD) patterns at various states of cycling reveals that the excellent structural stability is due to a primarily solid-solution sodiation/desodiation mechanism of the material during cycling. Moreover, a meaningful comparison with Na0.6MnO2 and Na0.6[Li0.2Mn0.8]O2 reveals that the Na0.6[Li0.2Ni0.2Mn0.6]O2 cathode achieves a very high working-average voltage that outperforms most of the lithium-doped manganese-oxide cathodes published to date.
The transference number for cations, t+ , is one of the most important parameters for characterizing polymeric and/or composite solid electrolytes. It expresses the contribution of the positive charge carriers to the total conductivity, which in turn reflects the degree of polarization due to the negative carriers in the electrolyte systems. Four electrochemical methods based on different equations commonly used for obtaining t+ are compared. A series of experiments were conducted with solid polymer electrolytes based on polyethylene oxide with and without TiO 2 ceramic additive. Interestingly, the oldest method developed and presented four decades ago, emerges as the most simple, reliable, sensitive, repeatable, and stable option for determining t+ values over time.
1 July 2022 in Journal of the Electrochemical Society
Solid-state batteries have received renewed attention in recent years. The present study compares all-solid-state sodium batteries containing sodium metal anodes, NaTi 2 (PO 4 ) 3 (NTP) cathodes and PEO polymer electrolyte (PE) with two salts—NaPF 6 and NaClO 4 . Electrochemical properties were determined by means of both AC and DC measurements. For fresh symmetric cells, it seems like using NaClO 4 as the salt leads to a lower interfacial resistance, but during contact with Na anodes, PEO:NaClO 4 PE produces an unstable interface whereas PEO-NaPF 6 forms a stable interface upon contact with sodium anodes. Battery prototypes with PEO:NaClO 4 showed a better performance than those using PEO:NaPF 6 in terms of specific capacity and energy content, as NaPF 6 produces HF by-product which impairs the performance of full cells. However, the use of composite solid electrolyte containing PEO:NaPF 6 and TiO 2 nanotubes alleviates detrimental effects of HF and thus enables a better performance of SS Na battery prototypes. This is probably due to the titania particles acting as a scavenger of HF, an inevitable contaminant in electrolyte systems containing PF 6− anions. On adding TiO 2 to polymer electrolytes, of both salts, the performance improves, what means that the TiO 2 has several positive effects in these systems.