1 January 2008 in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
We have investigated an actively size controlled droplet generation system by using magnetically driven microtool (MMT). With a vertical and lateral motion of the MMT in microchannel, the continuous phase can be pinched off by the movement of MMT to obtain size-controlled of droplets. With this method cell-enclosed droplet can be produced on demand to fit the size of each enclosed cell, and which is difficult to be carried out by fluid dynamic force. For the current study, the system has been evaluated in terms of the frequency of MMT actuation and the size of droplets produced and which contribute to the effective transportation of cells in microchannel.
1 January 2013 in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
We developed a highly-functional untethered on-chip robot for cell handling and micro-knife made by Si to cut zona pellucida of oocyte. The on-chip robot has a gripping mechanism which can grasp a cell or micro-object with sufficient power. The position and handling force of the robot are controlled independently by the magnetic force. The permanent magnets and electrical magnet are assembled together, and they are put under the microfluidic chip. The micro-knife had made by grayscale lithography technique. We demonstrated a cutting of zona pellucida and pushing out a part of cytoplasm of bovine oocyte.
1 January 2009 in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
1 January 2009 in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
1 January 2009 in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
We proposed a polymer-metal hybrid MMT (magnetically driven microtool) which has properties of both elasticity and rigidity. A magnetic metal axle is made by electroplating, then it is mounted directly in the center of the MMT during molding. By using this process, we could fabricate a hybrid MMT whose fixed axes are elastic to move specific direction, while the center axle is rigid to prevent bending by the unwanted external force. The magnetic metal axle also has a merit to have higher magnetic property which contributes to the powerful actuation. We designed a hybrid MMT for on-demand droplet dispensing on a chip. It has a parallel plate structure to be constrained in translational motion. The displacement of the hybrid MMT was about 300μm which was 6 times larger than that of the conventional MMT, and on-demand droplet generation was successfully performed. We confirmed production of the 177.7±2.3μm droplet. The hybrid MMT has potential to be used for a micro-sorting system of multiphase flow as well as micro-droplet dispenser.