28 January 2024 in Advanced Sensor Research
This contribution summarizes the current state of research regarding so‐called sensor‐integrating machine elements as an enabler of digitalization in mechanical engineering and——if available—their application in industry. The focus is on the methodical aspects of the development of these machine elements in general as well as specific sensor‐integrating machine elements that are either already in use or currently under development. Developmental aspects include the robust design of initially evaluated concepts for sensor‐integrating machine elements as well as their modularization. Smart materials with sensory functions are included in the analysis as well as the differentiation with regard to add‐on sensors. The aim of the authors interlinked by a special research program funded by the German Research Foundation (DFG) is to facilitate the exchange with other researchers with the help of the comprehensive overview given in this contribution. The contribution concludes with a brief discussion of open challenges, such as the energy supply and data transfer in rotating systems and also data security.
28 February 2024 in Engineering Research Express
In this work, we present a procedure for manufacturing a soft capacitive strain sensor in the form of a multi-layer electrical capacitor for further integration into the elastic gear rim of a jaw coupling. The dielectric elastomer sensor (DES) is based on an elastomeric substrate with alternating layers of conductive carbon black based ink as electrode layers and elastomeric film as a dielectric and electrical insulation. A variety of thin multi-layer sensors were produced to evaluate the manufacturing process. Additionally, using an LCR meter and a tensile test machine, the equivalent electrical capacitance (C) at the two sensor contacts and the applied force are measured, respectively. It is shown that C varies depending on the amount of sample strain caused by the applied force. By testing two versions of DES, a maximum change in capacitance of ΔC = 1.55 pF was achieved. The obtained characteristics show that the presented manufacturing process for the DES can be used as a soft strain sensor to measure the strain caused by the force applied to the elastic element between the jaw couplings.
18 June 2024 in Forschung im Ingenieurwesen
In recent years, industry and research (i) have driven the development and application of data-driven machines and systems and (ii) have increasingly introduced predictive maintenance. One of the main challenges is the acquisition of representative data for these applications. In the scope of mechanical systems, machine elements are the key parts for measuring process relevant data. Thereby, elastic couplings offer a considerable potential for a wide range of applications. The present work describes a novel space neutral sensor-integrating gear rim of a jaw coupling for the measurement of torque, rotational speed and temperature. The mechanical modifications on the coupling and the applied dielectric elastomer sensor are outlined. Additionally, the electrical conceptualization and the measurement chains are described. A manufactured prototype of the sensor-integrating jaw coupling and a proof of concept are presented.
19 October 2024 in Journal of Intelligent Material Systems and Structures
EHErnst-Friedrich Markus Henke
Ernst-Friedrich Markus Henke
In recent years, the demand for compact and inexpensive sensor systems for the digitalization of production processes has risen. One solution to meet this demand are sensor-integrating machine elements. These are machine elements with integrated sensors, whose geometry is not altered and thus allows an uncomplicated exchange of the conventional machine elements with the sensor-integrating machine elements. In the current work, a numerical model for a sensor-integrating jaw coupling is presented. The aim of the sensor-integration is to determine the deformation of the teeth of the gear rim with dielectric elastomer sensors (DES) and thus draw conclusions about the applied torque. In the following, a model for the DES is presented which is validated with experimental results. It was shown that the experimental and simulation results for the capacitance agree well, if only 50% of the change in area of the electrodes is taken into account. After that, a finite element model for the sensor-integrating jaw coupling itself is presented, which is created with the commercial software ABAQUS. Finally, the advantages and disadvantages for different positions of the sensor inside the gear rim of the jaw coupling are evaluated.
8 July 2024 in Materials Testing
This work investigates the hyper-viscoelastic behavior of a thermoplastic polyurethane IROGRAN A 92 E 5670 FCM used in the gear rim of a jaw coupling. The aim is to provide the material parameters for the modeling of jaw couplings in engineering tasks. Uniaxial compression tests were conducted at various temperatures and loading speeds to fit a hyper-viscoelastic material model. The material model uses the Yeoh free energy and the power law model with one Maxwell element. The parametrized material model showed very good results in comparison to experimental data. In addition, the influence of friction on the experiments was modeled, investigated, and discussed. Further component tests for a jaw coupling of size 28 were conducted with two different specimen types. The original gear rim and a modified gear rim with central boreholes for integrated sensors were used in the test. The influence of such a modification was investigated with four different loading cases, focusing on the torsion-torque characteristic and the relative damping. These component tests enable the validation of numerical models of jaw couplings.
16 September 2025 in Forschung im Ingenieurwesen
The possibility to directly measure the torque transmitted from a motor to a machine is not an easy task. To alleviate this, in the current work a new prototype of a sensor-integrating jaw coupling is proposed. In the prototype, double-sided counterbores are drilled into the teeth of the gear rim. Afterwards, dielectric elastomer sensors (DESs) are inserted, which are connected to strain amplifiers at both ends. The change in the capacitance of the sensors can then later be used to predict the torque. In the present work, the new prototype of the sensor-integrating jaw coupling is experimentally and numerically evaluated. Additionally, the manufactured DESs were subjected to multiple compressive loading-unloading cycles using a tensile testing machine to characterize them. It was shown for the first time that the coupling is able to detect the application of a torsion angle independent of the loading direction, i.e. clockwise or counterclockwise. Additionally, the correlation between the applied load and the measured change in capacitance is very good. Furthermore, a framework for the numerical simulation of both conventional and sensor-integrating jaw coupling is given and validated with experimental data. The model was implemented in the finite element software ABAQUS. To account for the viscous material properties of the material of the gear rim a hyper-viscoelastic material model was used. For the prediction of the torque, the numerical model yielded excellent results when compared to the experimental data.