Hydrogen-based transportation has gained popularity and has presented significant growth over the past few years, providing an excellent platform for capitalizing on natural resources while attaining global carbon policies and sustainability targets. However, lack of infrastructure, cost of fuel cell vehicles and hydrogen fuel, and absence of established hydrogen supply chains have been identified as critical challenges of hydrogen-based mobility. Despite current studies predominantly focusing on hydrogen-fueled passenger vehicles and related infrastructure, it was identified that the impacts of hydrogen fuel supply chain for freight transportation from a life cycle thinking perspective have been largely overlooked. This article aims at critically reviewing the existing body-of-knowledge on the current status of hydrogen fueling supply chain and exploring the potential of integrating hydrogen fuel for road freight transportation. Accordingly, the current status of alternative fuel use for freight transportation is discussed over technical, economic, and environmental dimensions outlining its benefits and challenges. Moreover, the pertinence of innovative and established methods of hydrogen production, distribution, and storage for freight transportation are evaluated based on a comprehensive literature review. This study reveals that the transformation of freight transportation into low-emission alternative fuels would require a comprehensive multicriteria assessment that includes technical, economic, environmental, and social feasibilities over the life cycle of the freight vehicle and the fuel supply chain. Moreover, decision parameters affecting the optimal fuel selection process were established through this study, while providing insights on the future prospects for hydrogen-fueled freight transformation in Canada.
5 September 2022 in International Journal of Sustainable Transportation
Freight trucks powered by alternative low-emissions fuel sources such as electricity or hydrogen have gained significant attention as replacements for their fossil fuel-operated counterparts. Even though this shift to alternative fuels can reduce the operational emissions at the vehicle tailpipe, there can be significant emissions throughout their supply chains. A thorough review of the published literature highlights that a comprehensive investigation is lacking on the well-to-wheel life cycle impacts of hydrogen fuel used for freight transportation. Furthermore, a comparison between hydrogen-fueled and electric freight transport is unavailable in the published literature. This study comprehensively investigated the life cycle environmental and economic impacts of alternative fueled freight transport based on vehicle types and relevant supply chains. A life cycle impact database was developed for key electric and hydrogen fuel supply chain scenarios and was ranked based on the economic and environmental performance under different decision-maker perspectives. The life cycle emissions of delivering hydrogen fuel range from 2.2 to 12.6 kgCO2eq./kg of hydrogen whereas electric grid emissions range from 0.005 to 0.315 kgCO2eq./MJ. However, hydrogen systems that use electrolysis to produce hydrogen show better environmental performance over the complete vehicle life cycle compared to electric systems that are highly dependent on nonrenewable energy sources. The cost of ownership of a hydrogen and electric freight truck is approximately 2.15 and 0.54 CAD/km respectively. However, with investments from governments and private institutions to develop hydrogen refueling infrastructure, hydrogen-fueled freight vehicles have the potential for reducing GHG emissions in the road transportation sector.
Bridges reinforced with superelastic shape memory alloys (SMAs) demonstrate improved performance under earthquake excitations. In general, the capital investment for a bridge reinforced with SMAs is higher due to their high cost and special workmanship requirement. However, when accounting for postearthquake repair and maintenance costs and environmental impacts, SMA-reinforced bridges can deliver significant economic and environmental advantages over conventional structures in the long run. Based on a life cycle thinking–based decision support framework developed in a companion paper, this study thoroughly evaluated the life cycle seismic performance of a bridge reinforced with an SMA considering three different reinforcement configurations. Fragility analyses were conducted for each reinforcement configuration of the SMA-reinforced concrete (RC) bridge to assess its seismic vulnerability. A life cycle cost (LCC) assessment was performed to determine the economic impacts during their service life. Additionally, cradle-to-grave life cycle assessment (LCA) was done using SimaPro to assess the environmental impacts. Using the outcomes of the these assessments, the overall life cycle performance of the novel bridges was compared with a similar bridge reinforced with conventional steel. The results showed that the SMA-reinforced bridges presented a better seismic life cycle performance compared with a conventional RC bridge from a seismic performance and economic perspective. However, the conventional bridge showed a better overall score from an eco-friendly approach.
Bridges are an integral part of a country’s transportation infrastructure system. Earthquake-induced damages to bridges could result in fatalities and injuries, disturbances to the transportation infrastructure system, and incur significant repair costs. Furthermore, bridges must stay functional following an earthquake to maintain the continuity of transportation. Thus, innovative high-performance materials in the critical regions of structures and/or structural systems must be used located in regions of high seismic activity to mitigate the impacts of earthquakes. Despite having a higher seismic resilience, these structures, in general, tend to require a greater capital investment as a result of utilizing expensive material and special workmanship. However, when accounting for the postearthquake repair and maintenance costs, these seismically enhanced bridges can deliver significant cost advantages over conventional structures in the long run. Even so, the outcomes depend on the frequency and severity of the seismic damage, the lifespan of the bridge, the cost of materials, and the embodied emissions of the structures. To ensure better overall results, the cost–benefit analysis should be done with a life-cycle thinking perspective when comparing and making a decision related to multiple bridge systems. In this regard, a decision framework is developed to evaluate the overall life cycle performance of such a novel bridge, using fuzzy logic to integrate uncertainty. The proposed framework will assist engineers and the construction industry as a whole in making informed decisions regarding bridge infrastructure planning under dynamic conditions.
22 July 2025 in Transportation Research Part A: Policy and Practice
Decarbonizing residential building heating remains a critical challenge due to continued reliance on natural gas and the strong seasonality of thermal demand. In this study, a hybrid renewable energy system integrating photovoltaic (PV), wind turbine (WT), and a proton exchange membrane electrolyzer is developed to produce hydrogen for residential space heating in Canada, while excess renewable electricity is utilized to meet cooling demand during low-heating periods. The system incorporates multiple storage pathways, including new lithium-ion batteries, recycled batteries, hydrogen gas storage, and hybrid storage configurations. A MATLAB-based particle swarm optimization (PSO) framework is employed to optimize system sizing under economic, environmental, and reliability constraints. Results show that the PV-WT-directly recycled battery-DG configuration achieved the lowest COH of 2.72 $/kg, reducing lifecycle emissions from 14.78 to 10.59 kg CO2/kg H2 compared to the new battery case. Although hydrogen gas storage significantly reduced diesel operation, the additional storage infrastructure increased the COH to 8.18 $/kg. In contrast, off-grid operation increased the COH to 12.20–15.76 $/kg due to underutilization of surplus renewable electricity, highlighting the importance of grid export. Under balanced multi-objective optimization, the recycled battery configuration achieved a COH of 3.36 $/kg with emissions of 6.28 kg CO2/kg H2, while emission-oriented optimization reduced emissions to 1.38 kg CO2/kg H2 at a higher COH of 9.25 $/kg. Overall, the results demonstrate that recycled lithium-ion battery integration can substantially improve the techno-economic and environmental performance of hydrogen-based residential energy systems.